Released versions:

Click here for the version from V1.00 to V2.10.

• Version 2.30

• Version 2.23

• Version 2.20

This release note applies to the following models:

Priority Rank Level

Version 2.30

Release date: February 27, 2023
SDK version: V1.60

New Features / Improvements

• Supports new CGI commands. 🇺

• Supports day and night scene switching on the [Schedule] setting. 🇺 View details #1
  "<Auto-Schedule>Daytime: Image Quality 1/ Night: Image Quality 2" has been added to the [Schedule mode] options.
  *[Scene settings linked to sunrise and sunset times] need to be configured to use this function.

• Added the On/Off setting to the [SNMP agent setting] in [Network]->[Advanced]->[SNMP]. 🇺
  *Default=On

• Supports a CGI command to start SD recording when an image transmission stops. 🇺 View details #2

• Supports editing the camera title on the live window. An edit icon appears next to the camera title. 🇺
  Note: Available for administrator only.

• Supports a command to send HTTP port number to a 3rd party application. 🇺

• Changed the default DHCP host name from COM MID1 to i-PRO-<MAC address of camera>. 🇺

• Improved the FTP/SFTP settings as follows 🇺 View details #3
  - Added 2fps and 3fps to the [Transmission interval] options of [Pre alarm] and [Post alarm]
  - Increased the number of SFTP server setting from 1 to2
  - Added "1920x1080" to the [Image capture size] options of [Pre alarm]

• Added 0.5s, 1s, 2s, 3s, and 4s to the [Alarm deactivation time] options. 🇺 View details #4

• Supports replacing %25 with % in the destination address of HTTP alarm notification. 🇺

• Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode". 🇺

• Improved [Audio detection] setting so that [AI analytics target] options (Gunshot/ Yell/ Vehicle Horn/ Glass Break) are enabled by default, when [Audio detection] is set to "On". 🇺

• Improved the frame rate during the slow shutter operation under low illuminance condition. 🇺

• Improved the image quality as follows 🇺
  Image contrast / Auto focus performance during pan-tilt operation / Image brightness during stabilizer operation

• Improved the detection accuracy of people detection for extension software. 🇺

• Supports the extension software AI Scene Change Detection free of charge. 🇺

• Changed the text color on the log list for the visibility improvement. 🇺

• Improved the ONVIF connection. 🇺

Resolved Issues

• Corrected an issue where the mic input volume from the camera became higher than the selected value. 🇨
  Occurrence condition: Change the [Mic input volume] on the live window.

• Corrected an issue where it was not possible to reinstall an extension software application after uninstalling it. 🇨
  Occurrence condition: The power of camera is turned off while uninstalling the extension software application.

• Corrected an issue where the camera could not connect to a recorder and VMS on rare occasion. 🇨
  Occurrence condition: TLS1.3 is selected for [HTTPS-Connection].

• Corrected an issue where H.265/H.264 live image might not appear. 🇨
  Occurrence condition:
  - Version 2.10 or later
  - Network Address Port Translation (NAPT) is configured on the router
  

Version 2.23

Release date: December 9, 2022
SDK version: V1.60

Resolved Issues

• The angle of view returns to the default center position. 🇧
  Occurrence condition:
  When satisfying both of the following conditions:
  - Version 2.10 or 2.20
  - The camera was restarted after adjusting the angle of view using the Extra optical zoom

• SFTP transmission fails depending on the SFTP server to be connected. 🇨

• The live image may not appear, as the maximum number of users concurrently accessible to the camera decreases. 🇧
  Occurrence condition:
  When satisfying all of the following conditions:
  - Version 2.10 or 2.20
  - [Internet mode] is set to Off by CGI command
  - H.264/H.265 transmission

• Unable to set privacy zone from i-PRO Configuration Tool (iCT). 🇨

Version 2.20

Release date: September 30, 2022
SDK version: V1.60

New Features / Improvements

• Changed the company name in the GlobalSign digital certificate installed on the camera to "i-PRO Co., Ltd." 🇺

• Supports the FTP function. 🇺 View details

• Added the HTML initialization function. 🇺 (Added on Nov.11, 2022)
  [Load the default HTML files (setup menu).] and [Reset to the default and load the default HTML files.] have been added to the [Default reset] tab.

• Changed the frame rate restriction when the extension software AI People Detection is installed on the camera as below. 🇺
  Previous versions : Restrict the maximum frame rate from 30fps to 15 fps when AI People Detection is installed on the camera.
  This version or later : Restrict the maximum frame rate from 30fps to 15fps after the communication starts with i-PRO Active Guard or i-PRO Configuration Tool.
  Note : The extension software AI People Detection needs to be updated to version 1.30 or later

Resolved Issues

• The occupancy detection area information is not included in the HTTP alarm notification from the camera. 🇨

• The frame rate and bit rate may not recover once they drop due to the environmental cause. 🇨