Released versions:

• Version 1.50

• Version 1.43

• Version 1.40

• Version 1.32

• Version 1.31

• Version 1.30

• Version 1.22

• Version 1.21

• Version 1.20

• Version 1.11

• Version 1.10

• Version 1.01

• Version 1.00 (First production)

This release note applies to the following models:

Priority Rank Level

Version 1.50

Release date: October 31, 2024

New Features / Improvements

• Supports new cameras
  Indoor PTZ:
  WV-S61602-Z3, WV-S61702-Z3
  Aero PTZ:
  WV-X67300-Z4-3, WV-X67300-Z4L3, WV-X67301-Z4L3, WV-X67310-Z4-1, WV-X67310-Z4-3, WV-X67310-Z4L1, WV-X67310-Z4L3, WV-X67311-Z4L3, WV-X67700-Z3-3, WV-X67700-Z3L3, WV-X67701-Z3L3, WV-X67710-Z3-1, WV-X67710-Z3-3, WV-X67710-Z3L1, WV-X67710-Z3L3, WV-X67711-Z3L3 View detail
  High zoom bullet:
  WV-S15301-Z1L, WV-S15301-Z1LN, WV-S15501-Z1L, WV-S15501-Z1LN, WV-S15501-Z3L, WV-S15501-Z3LN, WV-S15701-Z3L, WV-S15701-Z3LN, WV-X15301-Z1L, WV-X15301-Z1LN, WV-X15302-Z1L, WV-X15302-Z1LN, WV-X15501-Z1L, WV-X15501-Z1LN, WV-X15501-Z3L, WV-X15501-Z3LN, WV-X15502-Z1L, WV-X15502-Z1LN, WV-X15701-Z3L, WV-X15701-Z3LN View detail

• Improved to acquire the device information from the camera automatically. This will eliminate the need to support new cameras by version upgrade.
  *For offline kitting, select "i-PRO_Manual" for [Model] of [Registered information]. View detail

• Support detection frame display on the AI People Detection attribute setting of Remote monitoring.

• Enhanced security.

Resolved Issues

Fixed the following issues including other minor issues:

• Corrected an issue where audio transmission might be delayed.
  Occurrence condition: Display live images from cameras on a multi-screen for a long time

• Corrected an issue where thumbnail images of impact detection and casing open detection alarms did not appear on the [Alarm notifications] list of Remote monitoring.

• Corrected an issue where a connection error might occur with a 3rd party camera connected using ONVIF.

• Corrected an issue where recording data for a certain period of time cannot be played back on rare occasion.
  

Version 1.43

Release date: August 30, 2024

Resolved Issues

• Improved the communication with HDDs to avoid unnecessary “HDD slow response” warning under environments with a wide range of temperatures.
  

Version 1.40

Release date: June 28, 2024

New Features / Improvements

• Supports new cameras.
  Corner camera: WV-X25580-F2LN2
  Rapid PTZ: WV-S66300-Z3N, WV-S66300-Z3LN, WV-S66300-Z4N, WV-S66300-Z4LN, WV-S66600-Z3N, WV-S66600-Z3LN, WV-S66700-Z3N, WV-S66700-Z3LN, WV-X66300-Z3K, WV-X66300-Z3LK, WV-X66300-Z4K, WV-X66300-Z4LK, WV-X66600-Z3K, WV-X66600-Z3LK, WV-X66700-Z3K, WV-X66700-Z3LK

• Support IEEE 802.1X. View detail

• Support audio playback on the web browser over HTTPS. View detail
  *HTTP is not supported

• Added a [Playback resolution on the web browser] setting to the [System Management] tab in [Maintenance]. View detail

• Added a [Set PC time to this product] checkbox to the [Date & time adjustment] setting on the web browser. View detail

• Support batch entry of use name and password in the [Registered information] window on the web browser. View detail

• Added a [For split screen with a black band in full screen display, the image display area is enlarged vertically] checkbox to [Advanced setup] in the [Monitor] setting. View detail

• Support the brightness control for channel 2, 3 and 4 of ACTi encoder V2224. View detail

• Improved the ONVIF connection.

• Improved the live image over HTTPS on the web browser.

• Removed MD5 from the [Authentication method] of SNMPv3 in the [NTP/SNMP] tab.

• Enhanced security.

Resolved Issues

• Corrected an issue where the recorder might not start showing “STARTING UP” on rare occasion.
  Occurrence condition: After registering the Registration Key or switching the HDD operation mode.

• Corrected an issue where setting change on [Network] might not be possible due to “Incorrect IP address entry” error.

• Corrected an issue where the recorder might reboot on rare occasion.

• Corrected an issue where HDD viewer failed in [Export the video as a file].

• Corrected an issue where the live image might freeze for a few seconds after switching multi-screen display and 1-screen display of HDMI monitor.
  Occurrence condition: When [Display stream 2 live image when displaying on the monitor with 1-screen display.] is enabled.

• Corrected an issue where login via web browser might fail after changing the [User management] setting.
  

Version 1.32

Release date: March 29, 2024

Resolved Issues

• Corrected an issue where rollback* might happen at startup, on rare occasion.
  *Recorder fails in startup and may roll back the firmware to the previous version.
  Occurrence condition: WJ-NU301 version 1.30 and 1.31 only
  

Version 1.31

Release date: March 1, 2024

Resolved Issues

• Corrected an issue where audio would not be output from the main monitor.
  Occurrence condition: Version 1.30

• Corrected an issue with playback on the main monitor.
  

Version 1.30

Release date: February 19, 2024

New Features / Improvements

• Supports new cameras
  Rapid PTZ: WV-X66700-Z3LS, WV-X66700-Z3S, WV-S66700-Z3L, WV-S66700-Z, WV-X66600-Z3LS, WV-X66600-Z3S, WV-S66600-Z3L, WV-S66600-Z3, WV-X66300-Z4LS, WV-X66300-Z3LS, WV-X66300-Z4S, WV-X66300-Z3S, WV-S66300-Z4L, WV-S66300-Z3L, WV-S66300-Z4, WV-S66300-Z3
  X-series AI camera: WV-X15700-V2LN, WV-X15700-V2L, WV-X25700-V2LN, WV-X22700-V2L, X15600-V2LN, WV-X15600-V2L, WV-X25600-V2LN, WV-X22600-V2L, WV-X15500-V3LN, WV-X15500-V3L, WV-X25500-V3LN, WV-X22500-V3L, WV-X15300-V3LN, WV-X15300-V3L, WV-X25300-V3LN, WV-X22300-V3L
  Compact dome: WV-X35402-F2L, WV-S35402-F2L, WV-S35402-F2LG, WV-S35402-F2L1, WV-S32402-F2L, WV-S32402-F2LG, WV-S32402-F2L1, WV-U35401-F2L, WV-U35401-F2LG, WV-U31401-F2L, WV-U31401-F2LG, WV-X35302-F2L, WV-S35302-F2L, WV-S35302-F2LG, WV-S35302-F2L1, WV-S32302-F2L, WV-S32302-F2LG, WV-S32302-F2L1, WV-U35301-F2L, WV-U35301-F2LG, WV-U31301-F2L, WV-U31301-F2LG

• Added a [Active ClearSight] button on the “Camera control [Advanced]” panel for Rapid PTZ cameras.

• Added HDD viewer software. View detail

• Supports SD backup recording when “RTSP” or “Internet mode” is selected for [Connection method] in [Advanced setup] under the [Camera] setting. View detail

• Supports mouse operation on the camera image for web browser. View detail

• Supports recorded image download in mp4 format on a web browser. View detail

• Added on/off settings of [NTP Server] and [HTTP/HTTPS Server] in the [Security] setting. View detail

• Improved the stability of AI Privacy Guard recording by setting Stream(4) to 10ips.

Resolved Issues

• Corrected an issue where the audio from camera would not be output.
  Occurrence conditions:
  - MJPEG recording
  - [Connection] setting of the camera was set to “HTTPS” in the [Security] setting
  - The camera supports TLS1.3

• Corrected an issue where preset registration and preset operation might not be possible.
  Occurrence condition: Some 3rd party cameras connected using ONVIF

• Corrected an issue where the monitor might turn black on rare occasion.
  Occurrence condition: The monitor is displaying an image from a camera in unstable network environment.

• Corrected an issue where the recorder might show “STARTING UP” on the main monitor and stop recording on rare occasion.
  *The recorder will restart automatically.

• Corrected an issue where recording stopped due to “Recording error (AGT)” during an event recording on rare occasion.
  Occurrence condition: After adjusting time using NTP time adjustment at initial installation.

• Corrected an issue where the recorder might reboot.
  Occurrence condition: After registering a certain 3rd party camera or encoder using ONVIF.

• Corrected an issue where recording data might not be played back on general viewer.
  Occurrence conditions:
  - Copy or download the recording data in MP4 format
  - The data was recorded at the following resolution: 2192x2192, 1600x1200, 3072x2304, 3072x1728, 1728x3072, 1440x2560, 2160x3840, 1440x1440, 1200x1200, 3328x1872, 1872x3328, 2688x1520, 1520x2688

• Corrected an issue where PoE+ power supply to camera might be changed to PoE (Class 0) after restarting the recorder.
  Occurrence condition: The camera is connected via the camera port on the back of the recorder.

• Corrected the progress bar displayed while copying a 4GB or larger recording file. (Added on August 9, 2024)
  

Version 1.22

Release date: November 29, 2023

Resolved Issues

• Corrected an issue where the recorder could not be accessed from the browser, WV-ASM300 or i-PRO Mobile App, on rare occasion.
  Occurrence conditions:
  - Unstable network environment
  - Use HTTPS to access the recorder
  

Version 1.21

Release date: August 31, 2023

Resolved Issues

• Corrected an issue where the recorder might stop playing back an mp4 video.
  Occurrence conditions:
  - Version 1.20
  - Copy an H.265 video to a USB device in mp4 format, and play it back on the recorder
  

Version 1.20

Release date: June 30, 2023

New Features / Improvements

• Supports new cameras
  - WV-U11300-V2, WV-U21300-V2L
  - WV-S1136A, WV-S1536LA, WV-S1536LA-B, WV-S1536LNA, WV-S1536LNA-B, WV-S1536LNSA, WV-S1536LTA, WV-S1536LTNA, WV-S2136A, WV-S2136A-B, WV-S2136GA, WV-S2136GA-B, WV-S2136LA, WV-S2136LA-B, WV-S2136LGA, WV-S2136LGA-B, WV-S2236LA, WV-S2236LA-B, WV-S2236LGA, WV-S2236LGA-B, WV-S2536LA, WV-S2536LGA, WV-S2536LGNA, WV-S2536LNA, WV-S2536LTA, WV-S2536LTNA, WV-S4156A, WV-S4176A, WV-S4556LA,WV-S4576LA, WV-S71300A-F3

• Added remote monitoring function.
  * DHCP has been newly supported for this function. View details
  * For the details on remote monitoring, refer to NVR with built-in POE + switch, Remote Monitoring | i-PRO Products (To be updated on July 3, 2023 or later)

• Supports seamless image switching during the 1-screen and 4-screen live sequence operation for 1080p monitors. View details

• Supports 2-screen, 3-screen and 4-screen live display* on a 4K main monitor when [Image capture size] is 6M (3328×1872) or higher. View details
  * The recorder uses Stream(2)
  * For playback, only 1-screen is available

• Supports re-encoding transmission while performing fisheye image correction on a 4K main monitor and using a sub monitor. View details

• Improved ONVIF connection.

• Enhanced security.

Resolved Issues

• Corrected an issue where recording data might not be played back on general playback software.
  Occurrence condition:
  - Copy or download the recording data in MP4 format
  - The data is recorded in H.265

• Corrected an issue where the main monitor might show “STARTING UP” and operation became impossible, or the recorder might be rebooted, on rare occasion.
  

Version 1.11

Release date: April 5, 2023

Resolved Issues

• Corrected an issue where the order of live images on a multiscreen shifted while communication error was occurring on a camera.
  Occurrence conditions:
  - Firmware version 1.10
  - Multiscreen display on a main or sub monitor.
  

Version 1.10

Release date: February 28, 2023

New Features / Improvements

• Supports new cameras
  - WV-S61501-Z1, S65501-Z1, S65501-Z1G View details #2
  - WV-U85402-V2L, S85402-V2L, S85702-F3L, U85402-V2L1, S85402-V2L1, S85702-F3L1 View details #4
  - WV-X86530-Z2, X86531-Z2, X86530-Z2-1, X86531-Z2-1 View details #3

• Increased the number of thumbnails to be displayed on the thumbnail search result, from 4 to 12. View details #7

• Supports 4K output to a main monitor while using a sub monitor. View details #8
  Note: Thumbnails do not appear on the timeline of playback display while using a 4K main monitor and a sub monitor.

• Improved to reset the monitor display function and keep on recording when the recorder is overloaded.
  Note: The recorder temporarily stops displaying images during this process.

Resolved Issues

• Corrected an issue where the recorder may restart due to a recording error (RCA).
  Occurrence condition: When satisfying both of the followings.
  - Connection error occurs on all the cameras performing schedule recording
  - Recording has not been performed for more than 70 minutes* on the camera for event recording
  *140 minutes soon after the recorder startup
  

Version 1.01

Release date: January 26, 2023

New Features / Improvements

• Supports the live sequence on the main monitor.

Resolved Issues

• The recorder may reboot while performing the live sequence on the sub monitor.

• The recorder may reboot on rare occasions after changing the [Time zone] setting on [Day & time settings]. (Added on Feb. 14, 2022)

Version 1.00

• First mass-production