Released versions:

• Version 1.30

• Version 1.20

• Version 1.10

• Version 1.00 (First production)

This release note applies to the following models:

Priority Rank Level

Version 1.30

Release date: November 8, 2024

New Features / Improvements

• Supports new cameras.
  Indoor PTZ:
  WV-S61602-Z3, WV-S61702-Z3
  Aero PTZ:
  WV-X67300-Z4-3, WV-X67300-Z4L3, WV-X67301-Z4L3, WV-X67310-Z4-1, WV-X67310-Z4-3, WV-X67310-Z4L1, WV-X67310-Z4L3, WV-X67311-Z4L3, WV-X67700-Z3-3, WV-X67700-Z3L3, WV-X67701-Z3L3, WV-X67710-Z3-1, WV-X67710-Z3-3, WV-X67710-Z3L1, WV-X67710-Z3L3, WV-X67711-Z3L3 View detail
  High zoom bullet:
  WV-S15301-Z1L, WV-S15301-Z1LN, WV-S15501-Z1L, WV-S15501-Z1LN, WV-S15501-Z3L, WV-S15501-Z3LN, WV-S15701-Z3L, WV-S15701-Z3LN, WV-X15301-Z1L, WV-X15301-Z1LN, WV-X15302-Z1L, WV-X15302-Z1LN, WV-X15501-Z1L, WV-X15501-Z1LN, WV-X15501-Z3L, WV-X15501-Z3LN, WV-X15502-Z1L, WV-X15502-Z1LN, WV-X15701-Z3L, WV-X15701-Z3LN View detail

• Improved to acquire the device information from the camera automatically. This will eliminate the need to support new cameras by version upgrade.
  *For offline kitting, select "i-PRO_Manual" for [Model] of [Registered information]. View detail

• Support detection frame display on the AI People Detection attribute setting of Remote monitoring.

Resolved Issues

Fixed the following issues including other minor issues:

• Corrected an issue where the image transmission might be delayed on an HDMI monitor, on rare occasion.
  Occurrence condition: Keep displaying live image(s) from the same camera(s) for a long time.

• Improved the communication with HDDs to avoid unnecessary “HDD slow response” warning under environments with a wide range of temperatures.

• Corrected an issue where audio transmission might be delayed.
  Occurrence condition: Display live images from cameras on a multi-screen for a long time

• Corrected an issue where thumbnail images of impact detection and casing open detection alarms did not appear on the [Alarm notifications] list of Remote monitoring.

• Corrected an issue where a connection error might occur with a 3rd party camera connected using ONVIF.

• Corrected an issue where recording data for a certain period of time cannot be played back on rare occasion.

• (NX510 and NX410 only) Corrected an issue where a connection error occurred with cameras connected using ONVIF protocol.
  Occurrence conditions:
  - More than 33 cameras are connected using ONVIF
  - Turn off and on the switching hub
  

Version 1.20

Release date: June 28, 2024

New Features / Improvements

• Supports new cameras.
  Corner camera: WV-X25580-F2LN2
  Rapid PTZ: WV-S66300-Z3N, WV-S66300-Z3LN, WV-S66300-Z4N, WV-S66300-Z4LN, WV-S66600-Z3N, WV-S66600-Z3LN, WV-S66700-Z3N, WV-S66700-Z3LN, WV-X66300-Z3K, WV-X66300-Z3LK, WV-X66300-Z4K, WV-X66300-Z4LK, WV-X66600-Z3K, WV-X66600-Z3LK, WV-X66700-Z3K, WV-X66700-Z3LK

• Support 3D dewarp of fisheye camera’s image. View detail

• Support IEEE 802.1X. View detail

• Support audio playback on the web browser over HTTPS. View detail
  *HTTP is not supported

• Added a [Playback resolution on the web browser] setting to the [System Management] tab in [Maintenance]. View detail

• Added a [Set PC time to this product] checkbox to the [Date & time adjustment] setting on the web browser. View detail

• Support batch entry of use name and password in the [Registered information] window on the web browser. View detail

• Added a [For split screen with a black band in full screen display, the image display area is enlarged vertically] checkbox to [Advanced setup] in the [Monitor] setting. View detail

• Support the brightness control for channel 2, 3 and 4 of ACTi encoder V2224. View detail

• Improved the ONVIF connection.

• Improved the live image over HTTPS on the web browser.

• Removed MD5 from the [Authentication method] of SNMPv3 in the [NTP/SNMP] tab.

• Enhanced security.

Resolved Issues

• (NX410/NX510 only) Corrected an issue where HDD skip might happen after performing [Reconfigure with the same HDD operation mode setting as the current one].

• Corrected an issue where the recorder might reboot on rare occasion.
  ⇒Corrected an issue where the recorder might not start showing “STARTING UP” on rare occassion. (Updated on August 9, 2024)

• Corrected an issue where AI-VMD frames did not appear properly on the objects on a full-screen display.
  Occurrence condition: When [Keep the aspect ratio for the full screen display (Except during live sequence)] is not enabled.

• (NX510 only) Corrected an issue where the recorder might fail to communicate with cameras over HTTPS.
  Occurrence conditions: When only a few cameras are connected out of more than 65 registered cameras.

• Corrected an issue where HDD viewer failed in [Export the video as a file].

• Corrected an issue where the live image might freeze for a few seconds after switching multi-screen display and 1-screen display of HDMI monitor.
  Occurrence condition: When [Display stream 2 live image when displaying on the monitor with 1-screen display.] is enabled.

• Corrected an issue where login via web browser might fail after changing the [User management] setting.
  

Version 1.10

Release date: February 16, 2024

New Features / Improvements

• Supports new cameras
  X-series AI camera: WV-X15700-V2LN, WV-X15700-V2L, WV-X25700-V2LN, WV-X22700-V2L, X15600-V2LN, WV-X15600-V2L, WV-X25600-V2LN, WV-X22600-V2L, WV-X15500-V3LN, WV-X15500-V3L, WV-X25500-V3LN, WV-X22500-V3L, WV-X15300-V3LN, WV-X15300-V3L, WV-X25300-V3LN, WV-X22300-V3L
  Compact dome: WV-X35402-F2L, WV-S35402-F2L, WV-S35402-F2LG, WV-S35402-F2L1, WV-S32402-F2L, WV-S32402-F2LG, WV-S32402-F2L1, WV-U35401-F2L, WV-U35401-F2LG, WV-U31401-F2L, WV-U31401-F2LG, WV-U35301-F2L, WV-U35301-F2LG, WV-U31301-F2L, WV-U31301-F2LG

• Improved the stability of AI Privacy Guard recording by setting Stream(4) to 10ips.

Resolved Issues

• Corrected the data size displayed on the copy window while downloading the recorded images.
  *Applies to NX510 and NX410 only.

• Corrected an issue where formatting HDDs failed and ended up with HDD removed status.
  *Applies to NX510 and NX410 only.
  Occurrence conditions:
  Replace HDDs due to RAID5 2down or RAID6 3down, and then click the execute button of [Reconfigure with the same HDD operation mode setting as the current one] to format.

• Corrected an issue where preset registration and preset operation might not be possible.
  Occurrence condition: Some 3rd party cameras connected using ONVIF

• Corrected an issue where the monitor might turn black on rare occasion.
  Occurrence condition: The monitor is displaying an image from a camera in unstable network environment.

• Corrected an issue where setting change failed on the [AI privacy guard recording camera] window.
  Occurrence conditions:
  - The camera list on the [Security between this product and camera] window includes a camera with its “Connection” setting “HTTPS”
  - Operation on a monitor

• Corrected an issue where the recorder might show “STARTING UP” on the main monitor and stop recording on rare occasion.
  *The recorder will restart automatically.

• Corrected an issue where recording stopped due to “Recording error (AGT)” during an event recording on rare occasion.
  Occurrence condition: After adjusting time using NTP time adjustment at initial installation.

• Corrected an issue where the recorder might reboot.
  Occurrence condition: After registering a certain 3rd party camera or encoder using ONVIF.

• Corrected an issue where recording data might not be played back on general viewer.
  Occurrence conditions:
  - Copy or download the recording data in MP4 format
  - The data was recorded at the following resolution: 2192x2192, 1600x1200, 3072x2304, 3072x1728, 1728x3072, 1440x2560, 2160x3840, 1440x1440, 1200x1200, 3328x1872, 1872x3328, 2688x1520, 1520x2688

Version 1.00

• First mass-production