Spaces
Apps
Templates
Create
i-PRO FAQ
All content
Calendars
Space settings
Content
Results will update as you type.
Network Cameras
Multi Sensor
PTZ
360-degree
i-PRO mini
SD Memory Card
Camera Installation
•
What kind of LAN cable can I use to supply power to i-PRO cameras with PoE switch?
•
Is it possible to use Coaxial-LAN Converter BY-HPE11KT in combination with WJ-PR204, WJ-PR201 and WJ-PC200?
•
Is it possible to connect i-PRO cameras to third party Coaxial-LAN Converters?
•
Where is the right place to install a surge protector for a camera?
•
How many pins does M12 connector have in i-PRO camera?
•
Which image capture mode should I select when installing a 360-degree fisheye camera on the wall?
•
What type of Ethernet cable is recommended for i-PRO devices?
•
What kind of methods should I wire the camera in order not to be affected by noise from outside?
•
What is the recommended PoE injector (60W) for i-PRO products?
•
Can I connect analog cameras to NX series recorder directly?
•
What is M12 connector used in WV-S3532LM (for vehicles)?
•
Are there any differences in the position of fixing screws between a new and old compact dome camera when replacing them?
•
How can I reduce image blur during nighttime?
•
What USB Wi-Fi can we use for i-PRO camera?
•
How should I install the camera?
•
How can I install a bullet camera in 90 ° rotation (corridor)?
•
What is included in the camera carton box?
•
How can I prevent IR reflections in the image when I attach the sunshade to the dome camera?
•
When an inner cover (WV-QAT100) is attached to indoor PTZ camera, shadows appear, how can I avoid this?
•
What is the color layout of the cable to create an RJ45 connector for a network camera?
•
What cameras does the extension unit WV-X65F1/S25F1 support?
•
Which cameras support the Easy Kitting Package?
•
During kitting, got an error message "An error was detected in the installation status. Please recheck the installation status of this machine and turn on the power again."
•
Would it be possible to install salt registant i-PRO cameras and accessories in wide areas affected by salt damage? Please let me know if there are any important points to keep in mind.
•
I get an "It is operating with POE Class 0 Power Supply" error, even though it is connected to a POE+ switch. What do I do?
•
Is there a time limit for easy kitting my camera?
•
How can I install the camera on the ceiling using the WV-QCL100-W/QCL101-W?
•
When connecting an AC adapter and a PoE HUB to the Coaxial-LAN Converters (WJ-PR201/204) at the same time, which power supply has priority?
Camera Operation
Camera Specification
Camera Troubleshooting
Camera by purpose
Operating Condition
Camera Maintenance
Network Recorders
ASM Solution
VMS Solution
Analytics
System Products
Accessories
Tools
System Design
Lisence Registration
Blogs
Apps
draw.io Diagrams
i-PRO FAQ
/
Network Cameras
/
Camera Installation
Camera Installation
Kiyonori Harada (原田 清憲)
Gen Konishi
Owned by
Kiyonori Harada (原田 清憲)
Last updated:
Feb 22, 2023
Loading data...
{"serverDuration": 18, "requestCorrelationId": "8951afb1d57c493b93a01faf17963296"}
Kiyonori Harada (原田 清憲)
Gen Konishi