Network Cameras
- Youichi Nakamura (中村 陽一)
- Ryo Yoshida (吉田 亮)
- 1 May. 2024
- 2 Feb. 2024
- 2.1 Overview - Feb. 2024
- 2.2 1. Support multiple domains in Subject Alternative Name
- 2.3 2. Improve measures against brute force attacks
- 2.4 3. Support function to prohibit access in browser
- 2.5 4. Add SD card error event to HTTP alarm
- 2.6 5. Supports real-time frame rate/ bit rate display
- 2.7 6. Add "Blurring" to "Privacy zone Display type"
- 2.8 7. Improve “AI-VMD & PTZ linkage”
- 2.9 8. Improve AI Privacy Guard setting
- 3 Sep. 2023
- 3.1 Overview - Sep. 2023
- 3.2 1. Improve frame rate when GOP control is set to Advanced
- 3.3 2. Support ON/OFF control by CGI for “Manual PTZ linkage” and “AI-VMD & PTZ linkage”
- 3.4 3. Improve schedule settings (Day/Night scene switching)
- 3.5 4. Add "Auto Backup" to "Save trigger" of SD recording
- 3.6 5. Add ext4 support to SD memory card file system format
- 3.7 6. Improve FTP/SFTP settings
- 3.8 7. Increase the range of “Alarm deactivation time”
- 3.9 8. Add "1280x720" resolution of 4MP model
- 4 Mar. 2023
- 5 Feb. 2023
- 5.1 Overview - Feb. 2023
- 5.2 1. Improve schedule settings (Day/Night scene switching)
- 5.3 2. Add "Auto Backup" to "Save trigger" of SD recording
- 5.4 3. Improve FTP/SFTP settings
- 5.5 4. Increase the range of “Alarm deactivation time”
- 5.6 5. Add corridor mode to "Image capture mode"
- 5.7 6. Add "1280x720" resolution of 4MP model
- 6 Sep. 2022
May. 2024
Overview - May. 2024
Target products
Target products | Version | ||
|---|---|---|---|
X series | Bullet/Dome | X15300-V3L* / X15600-V2L* / X15700-V2L* | 3.20 |
Multi-directional | X86530* / X86531* | 2.60 | |
S series | Box/Bullet/Dome | S1136 / S1536* / S15500-F3L / S15500-F6L / S15500-V3L* / S15600-V2L* / S15700-V2L* | 2.60 |
Compact dome | S32302-F2L* / S32402-F2L* / S35302-F2L* / S35402-F2L* | 2.60 | |
PTZ | S61300-ZY / S61301-Z1 / S61301-Z2 / S61302-Z4 / S61501-Z1 | 2.60 | |
mini | S71300-F3 | 2.60 | |
Multi-directional | S8543* / S8544* / S85402* /S8563L* / S8564L* / S8573L* / S8574L* / S85702* | 2.60 | |
U series | PTZ | U61300-ZY* / U61301-Z1 / U61301-Z2 | 2.60 |
Version up contents
Contents | X series | S series | U series | |||||
|---|---|---|---|---|---|---|---|---|
Bullet | Multi-directional | Box/Bullet | Compact dome | PTZ | mini | Multi-directional | PTZ | |
1. Change KMS registration to unnecessary for AI Face Detection |
| |||||||
2. Add “Auto position refresh” setting |
|
|
|
|
|
| ||
: Version up target : Supported in previous versions
1. Change KMS registration to unnecessary for AI Face Detection
From the following camera versions, KMS registration is no longer required when using AI Face Detection.
Target products | Version | ||
|---|---|---|---|
X series | Bullet/Dome | WV-X15300-V3L* / X15600-V2L* / X15700-V2L* | V3.20 |
Other AI cameras | V2.60 | ||
2. Add “Auto position refresh” setting
Support the following models.
S series
WV-S61301-Z1 / S61301-Z2 / S61302-Z4 / S61501-Z1
WV-S65301-Z1* / S65302-Z2* / S65340-Z2* / S65340-Z4* / S65501-Z1*
U series
WV-U61301-Z1 / U61301-Z2
WV-U65301-Z1* / U65302-Z2*
The following models are already supported.
- WV-S66300-Z3* / S66300-Z4* / S66600-Z3* / S66700-Z3*
By selecting "On", the panning (turning) angle will be automatically corrected when it deviates by a certain amount.
Feb. 2024
Overview - Feb. 2024
Target products
Target products | Version | ||
|---|---|---|---|
X series | Bullet/Dome | X15300-V3L* / X15600-V2L* / X15700-V2L* | 3.10 |
Multi-directional | X86530* / X86531* | 2.50 | |
S series | Box/Bullet/Dome | S1136 / S1536* / S15500-F3L / S15500-F6L / S15500-V3L* / S15600-V2L* / S15700-V2L* | 2.50 |
Compact dome | S32302-F2L* / S32402-F2L* / S35302-F2L* / S35402-F2L* | 2.50 | |
360-degree fisheye | S4156 / S4176 / S4556* / S4576* | 2.50 | |
PTZ | S61300-ZY / S61301-Z1 / S61301-Z2 / S61302-Z4 / S61501-Z1 | 2.50 | |
mini | S71300-F3 | 2.50 | |
Multi-directional | S8543* / S8544* / S85402* /S8563L* / S8564L* / S8573L* / S8574L* / S85702* | 2.50 | |
U series | PTZ | U61300-ZY* / U61301-Z1 / U61301-Z2 | 2.50 |
Multi-directional | U85402* | 2.50 | |
Version up contents
Contents | X series | S series | U series | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
Bullet | Multi-directional | Box/Bullet | Compact dome | 360-degree fisheye | PTZ | mini | Multi-directional | PTZ | Multi-directional | |
1. Support multiple domains in Subject Alternative Name | ||||||||||
2. Improve measures against brute force attacks | ||||||||||
3. Support function to prohibit access in browser | ||||||||||
4. Add SD card error event to HTTP alarm | ||||||||||
5. Supports real-time frame rate/ bit rate display | ||||||||||
6. Add "Blurring" to "Privacy zone Display type" |
|
|
|
|
|
|
|
|
| |
7. Improve “AI-VMD & PTZ linkage” |
|
|
|
|
|
|
|
|
| |
8. Improve AI Privacy Guard setting |
|
|
|
| ||||||
: Version up target : Supported in previous versions
1. Support multiple domains in Subject Alternative Name
Added Subject Alternative Name (SAN) entry field to CSR creation screen.
64 characters per domain.
Available number of domain registration : 8
For the [Subject Alternative Name], you can enter the following characters
: 0 to 9, A to Z, a to z, and the following symbols: ".", ":", "*", ",", "-"When entering multiple domain names in [Subject Alternative Name], separate them with commas.
2. Improve measures against brute force attacks
Added "Brute force attack countermeasures" setting to the [User mng.] menu.
If you enter the wrong user name or password the specified number of times within the time set in [Blocking conditions], you cannot access your browser or SNMP/FTP for the period set in [Blocking period].
3. Support function to prohibit access in browser
If [Browser Access] is set to "Disable", access to live images is disabled.
To switch [Browser Access] from "Disable" to "Enable", you need to initialize the setting data.
Refer to the camera's Operating Instructions for details on initializing the settings.
4. Add SD card error event to HTTP alarm
Check "Diag." to receive HTTP notification of the SD memory card status as shown below.
When the amount of free space remaining on the SD memory card is running low
When an SD memory card recognition error occurs
When an SD memory card write error occurs.
5. Supports real-time frame rate/ bit rate display
Displays the frame rate and bit rate of the stream currently displayed in the live display.
6. Add "Blurring" to "Privacy zone Display type"
"Blurring" enables to make personal information transparent and invisible in the area.
When “Blurring” is selected:
" Intensity of blurring" - “High / Middle / Low"
7. Improve “AI-VMD & PTZ linkage”
7-1. Improve linkage accuracy
The PTZ head moves exactly to the position where AI-VMD alarm occurred.
7-2. support various ON/OFF control by CGI
You can control the linkages using the CGI commands below.
Send CGI commands to the multi part.
Setting items | CGI | Parameter | Value |
|---|---|---|---|
AI-VMD & PTZ linkage | cgi-bin/setdata | alarm_cooperation_aivmd | 0 : Off |
VMD & PTZ linkage | alarm_cooperation_vmd | 0 : Off | |
Auto tracking after “AI-VMD & PTZ linkage” | alarm_attracking | 0 : Off |
Command Example
<When setting "AI-VMD & PTZ linkage" to ON and "Auto tracking after AI-VMD & PTZ linkage" to OFF>
http://192.168.0.10/cgi-bin/setdata?alarm_cooperation_aivmd=1&alarm_attracking=0
How to check the settings
Check the response contents of the "cgi-bin/getdata" command.
<When setting "AI-VMD & PTZ linkage" to ON and "Auto tracking after AI-VMD & PTZ linkage" to OFF>
alarm_cooperation_aivmd,"1"
alarm_attracking,"0"
8. Improve AI Privacy Guard setting
8-1. Add targets to "Privacy Guard target"
Note: Changes are underlined in the table below.
Privacy Guard target | Description |
|---|---|
Off | No pixelating is carried out. |
Face | Pixelating is carried out when a part of an image is judged by AI processing to be a face. |
Human | Pixelating is carried out on the area of an image which is judged by AI processing to be a human. |
Except face | If the AI determines that the image is a face, mosaic processing is applied to areas other than the face. |
Except human | If the AI determines that the image is of a human, mosaic processing will be applied to areas other than the human. |
All | Mosaic processing is performed on the entire screen. |
8-2. Improve "AI Privacy Guard prohibited area setting"
Prohibited aera setting
Masking zone (max. 16 squares): You can draw up to 16 squares as prohibited area. Settings for up to 8 locations are distinguished by the color of the drawing line.
Make the inside/outside of the area a prohibited area
Select the area to be a prohibited.
Default setting: [Make the inside of the area a prohibited area]
In order to use "AI Privacy Guard", it is necessary to install "AI Privacy Guard".
Sep. 2023
Overview - Sep. 2023
Target products
Target products | Version | ||
|---|---|---|---|
X series | Multi-directional + PTZ | X86530* / X86531* | 2.40 |
S series | Multi-directional (3 or 4 sensors) | S8543* / S8544* / S8563L* / S8564L* / S8573L* / S8574L* | 2.40 |
Multi-directional (2 sensors) | S85402* / S85702* | 2.40 | |
U series | Multi-directional (2 sensors) | U85402* | 2.40 |
Version up contents
Contents | X series | S series | U series | |
|---|---|---|---|---|
Multi-directional + PTZ | Multi-directional (3 or 4 sensors) | Multi-directional (2 sensors) | Multi-directional (2 sensors) | |
1. Improve frame rate when GOP control is set to Advanced |
|
| ||
2. Support ON/OFF control by CGI for “Manual PTZ linkage” and “AI-VMD & PTZ linkage” |
|
|
| |
3. Improve schedule settings (Day/Night scene switching) |
| |||
4. Add "Automatic backup" to "Save trigger" of SD recording |
| |||
5. Add ext4 support to SD memory card file system format |
| |||
6. Improve FTP/SFTP settings |
|
|
| |
7. Increase the range of “Alarm deactivation time” |
|
|
| |
8. Add "1280x720" resolution of 4MP model |
|
| ||
: Version up target : Supported in previous versions
1. Improve frame rate when GOP control is set to Advanced
| Before | After | ||
|---|---|---|---|---|
X series | X86530* / X86531* | Multi part | Max 7.5fps | Max 15fps |
S series | S8573L* / S8574L* | 4K model | Max 7.5fps | Max 15fps |
S8563L* / S8564L* | 6MP model | Max 7.5fps | Max 15fps | |
S8543* / S8544* | 4MP model | Max 15fps | Max 30fps | |
2. Support ON/OFF control by CGI for “Manual PTZ linkage” and “AI-VMD & PTZ linkage”
Linkage can be controlled on/off using the CGI below.
Send CGI commands to the multi part.
Setting items | CGI | Parameter | Value |
|---|---|---|---|
Manual PTZ linkage | cgi-bin/setdata | manual_cooperation | 0 : Off 1 : On Initial value : 1 |
AI-VMD & PTZ linkage | alarm_cooperation | 0 : Off 1 : On Initial value : 1 |
Command Example
<When setting "Manual PTZ linkage" to ON and "AI-VMD & PTZ linkage" to OFF>
http://192.168.0.10/cgi-bin/setdata?manual_cooperation=1&alarm_cooperation=0
How to check the settings
Check the response contents of the "cgi-bin/getdata" command.
<When setting "Manual PTZ linkage" to ON and "AI-VMD & PTZ linkage" to OFF>
manual_cooperation,"1"
alarm_cooperation,"0"
3. Improve schedule settings (Day/Night scene switching)
You can automatically switch to the scene file set in advance at the time of sunrise/sunset.
1. Schedule mode
Add "Auto-Schedule" to schedule mode. At sunrise, the image quality is set to "Scene file 1", and at sunset, the image quality is set to "Scene file 2".
2. Scene settings linked to sunrise and sunset times
Auto Scheduler (Manual/ City Selection)
: Select the input method for [Latitude], [Longitude], and [Altitude]. If you specify a city, [Latitude] [Longitude] [Altitude] are automatically entered.
Latitude / Longitude / Altitude
: Enter the value of the location where the camera is installed.
Automatic calculation result
: The sunrise/sunset times are calculated from [Latitude] [Longitude] [Altitude].
Sunrise time and sunset time correction
: Offset the sunrise and sunset times in [Automatic calculation result].
4. Add "Auto Backup" to "Save trigger" of SD recording
Support for interface of function that automatically backs up stream to SD card when the network is disconnected. When "Auto Backup" is set to "On" from VMS, "Auto Backup" is displayed in "Save trigger".
5. Add ext4 support to SD memory card file system format
Some 3rd Party apps may require ext4 file system format.
Check your app's manual for more information.
6. Improve FTP/SFTP settings
6-1. Add 2fps/3fps to "Transmission interval" of "Pre/Post alarm"
Note: Changes are underlined in the table below.
Before | 0.1fps / 0.2fps / 0.33fps / 0.5fps / 1fps |
After | 0.1fps / 0.2fps / 0.33fps / 0.5fps / 1fps / 2fps / 3fps |
6-2. Add 1920x1080 to "support resolution" of "Pre alarm"
Note: Changes are underlined in the table below.
Before | 16:9 | 1280x720 / 640x360 / 320x180 |
4:3 | 1280x960 / 800x600 / 640x480 / 400x300 / 320x240 | |
After | 16:9 | 1920x1080 / 1280x720 / 640x360 / 320x180 |
4:3 | 1280x960 / 800x600 / 640x480 / 400x300 / 320x240 |
6-3. Expand alarm image transmission settings
| Before | After |
|---|---|---|
Number of alarm settings | 1 | 2 |
Number of destinations | 1 | 2 |
7. Increase the range of “Alarm deactivation time”
Note: Changes are underlined in the table below.
Before | 5 to 600 sec |
After | 0.5 sec or 1 to 600 sec |
8. Add "1280x720" resolution of 4MP model
Support the following models.
WV-S85402*
WV-U85402*
Note: Changes are underlined in the table below.
| Before | After | ||
|---|---|---|---|---|
Stream(1) | Stream(2) | Stream(1) | Stream(2) | |
Resolution | 2688 x 1520 2560 x 1440 1920 x 1080
|
640 x 360 320 x 180 | 2688 x 1520 2560 x 1440 1920 x 1080 1280 x 720 |
1280 x 720 *1 640 x 360 320 x 180 |
Max fps | 30 fps | 30 fps | 30 fps | 30 fps |
Mar. 2023
Overview - Mar. 2023
Target products
Target products | Version | ||
|---|---|---|---|
S series | Fixed Box/Dome [2MP] | S1136 / S1536* / S2136* / S2236* / S2536* | 2.33 |
Fixed Box/Dome [5MP/6MP/4K] | S15500-F3L / S15500-F6L / S15500-V3L* / S15600-V2L* / S15700-V2L* S22500-F3L / S22500-F6L / S22500-V3L* / S22600-V2L* / S22700-V2L* S25500-F3L / S25500-F6L / S25500-V3L* / S25600-V2L* / S25700-V2L* | 2.33 | |
360-degree fisheye | S4156 / S4176 / S4556* / S4576* | 2.33 | |
PTZ | S61300-ZY* / S61301-Z1 / S61301-Z2 / S61302-Z4 / S61501-Z1 S65300-ZY* / S65301-Z1* / S65302-Z2* / S65340-Z2* / S65340-Z4* / S65501-Z1* | 2.33 | |
mini | S71300-F3 | 2.33 | |
Multi-directional | S8543* / S8544* / S8563L* / S8564L* / S8573L* / S8574L* | 2.33 | |
U series | PTZ | U61300-ZY* / U61301-Z1 / U61301-Z2 U65300-ZY* / U65301-Z1* / U65302-Z2* | 2.33 |
Version up contents
Contents | S series | U series | |||||
|---|---|---|---|---|---|---|---|
Fixed Box/Dome [2MP] | Fixed Box/Dome [5MP/6MP/4K] | 360-degree fisheye | PTZ | mini | Multi-directional | PTZ | |
| |||||||
: Version up target : Supported in previous versions
1. Add ext4 support to SD memory card file system format
Some 3rd Party apps may require ext4 file system format.
Check your app's manual for more information.
Feb. 2023
Overview - Feb. 2023
Target products
Target products | Version | ||
|---|---|---|---|
S series | Fixed Box/Dome [2MP] | S1136 / S1536* / S2136* / S2236* / S2536* | 2.30 |
Fixed Box/Dome [5MP/6MP/4K] | S15500-F3L / S15500-F6L / S15500-V3L* / S15600-V2L* / S15700-V2L* S22500-F3L / S22500-F6L / S22500-V3L* / S22600-V2L* / S22700-V2L* S25500-F3L / S25500-F6L / S25500-V3L* / S25600-V2L* / S25700-V2L* | 2.30 | |
360-degree fisheye | S4156 / S4176 / S4556* / S4576* | 2.30 | |
PTZ | S61301-Z2 / S61302-Z4 / S61501-Z1 S65340-Z2* / S65340-Z4* / S65501-Z1* | 2.30 | |
mini | S71300-F3 | 2.30 | |
Multi-directional | S8543* / S8544* / S8563L* / S8564L* / S8573L* / S8574L* | 2.30 | |
U series | PTZ | U61300-ZY* / U61301-Z1 / U61301-Z2 U65300-ZY* / U65301-Z1* / U65302-Z2* | 2.30 |
Version up contents
Contents | S series | U series | |||||
|---|---|---|---|---|---|---|---|
Fixed Box/Dome [2MP] | Fixed Box/Dome [5MP/6MP/4K] | 360-degree fisheye | PTZ | mini | Multi-directional | PTZ | |
1. Improve schedule settings (Day/Night scene switching) |
|
|
|
|
|
|
|
2. Add "Automatic backup" to "Save trigger" of SD recording |
|
|
|
|
|
|
|
3. Improve FTP/SFTP settings |
|
|
|
|
|
|
|
4. Increase the range of “Alarm deactivation time” |
|
|
|
|
|
|
|
5. Add corridor mode to "Image capture mode" |
|
|
|
|
|
|
|
6. Add "1280x720" resolution of 4MP model |
|
|
|
|
|
|
|
: Version up target : Supported in previous versions
1. Improve schedule settings (Day/Night scene switching)
You can automatically switch to the scene file set in advance at the time of sunrise/sunset.
1. Schedule mode
Add "Auto-Schedule" to schedule mode. At sunrise, the image quality is set to "Scene file 1", and at sunset, the image quality is set to "Scene file 2".
2. Scene settings linked to sunrise and sunset times
Auto Scheduler (Manual/ City Selection)
: Select the input method for [Latitude], [Longitude], and [Altitude]. If you specify a city, [Latitude] [Longitude] [Altitude] are automatically entered.
Latitude / Longitude / Altitude
: Enter the value of the location where the camera is installed.
Automatic calculation result
: The sunrise/sunset times are calculated from [Latitude] [Longitude] [Altitude].
Sunrise time and sunset time correction
: Offset the sunrise and sunset times in [Automatic calculation result].
2. Add "Auto Backup" to "Save trigger" of SD recording
Support for interface of function that automatically backs up stream to SD card when the network is disconnected. When "Auto Backup" is set to "On" from VMS, "Auto Backup" is displayed in "Save trigger".
3. Improve FTP/SFTP settings
3-1. Add 2fps/3fps to "Transmission interval" of "Pre/Post alarm"
Note: Changes are underlined in the table below.
Before | 0.1fps / 0.2fps / 0.33fps / 0.5fps / 1fps |
After | 0.1fps / 0.2fps / 0.33fps / 0.5fps / 1fps / 2fps / 3fps |
3-2. Add 1920x1080 to "support resolution" of "Pre alarm"
Note: Changes are underlined in the table below.
Before | 16:9 | 1280x720 / 640x360 / 320x180 |
4:3 | 1280x960 / 800x600 / 640x480 / 400x300 / 320x240 | |
After | 16:9 | 1920x1080 / 1280x720 / 640x360 / 320x180 |
4:3 | 1280x960 / 800x600 / 640x480 / 400x300 / 320x240 |
3-3. Expand alarm image transmission settings
| Before | After |
|---|---|---|
Number of alarm settings | 1 | 2 |
Number of destinations | 1 | 2 |
4. Increase the range of “Alarm deactivation time”
Note: Changes are underlined in the table below.
Before | 5 to 600 sec |
After | 0.5 sec or 1 to 600 sec |
5. Add corridor mode to "Image capture mode"
Corridor mode corrects the distortion of the upper and lower parts of the fisheye image and displays it on the left and right.
Add “Corridor” and “Fisheye + Corridor“ mode to "Image capture mode"
Note: Changes are underlined in the table below.
Before | Fisheye / Double Panorama / Panorama / Quad PTZ / Single PTZ / Fisheye + Double Panorama / Fisheye + Panorama / Fisheye + Quad PTZ / Quad Stream |
After | Fisheye / Double Panorama / Corridor / Panorama / Quad PTZ / Single PTZ / Fisheye + Double Panorama / Fisheye + Corridor / Fisheye + Panorama / Fisheye + Quad PTZ / Quad Stream |
6. Add "1280x720" resolution of 4MP model
Support the following models.
WV-S8543*
WV-S8544*
Note: Changes are underlined in the table below.
| Before | After | ||
|---|---|---|---|---|
Stream(1) | Stream(2) | Stream(1) | Stream(2) | |
Resolution | 2688 x 1520 2560 x 1440 1920 x 1080
|
640 x 360 320 x 180 | 2688 x 1520 2560 x 1440 1920 x 1080 1280 x 720 |
1280 x 720 *1 640 x 360 320 x 180 |
Max fps | 30 fps | 30 fps | 30 fps | 30 fps |
Sep. 2022
Overview - Sep. 2022
Target products
Target products | Version | ||
|---|---|---|---|
S series | Fixed Box/Dome [2MP] | S1136 / S1536* / S2136* / S2236* / S2536* | 2.20 |
Fixed Box/Dome [5MP/6MP/4K] | S15500-F3L / S15500-F6L / S15500-V3L* / S15600-V2L* / S15700-V2L* S22500-F3L / S22500-F6L / S22500-V3L* / S22600-V2L* / S22700-V2L* S25500-F3L / S25500-F6L / S25500-V3L* / S25600-V2L* / S25700-V2L* | 2.20 | |
360-degree fisheye | S4156 / S4176 / S4556* / S4576* | 2.20 | |
PTZ | S61301-Z2 / S61302-Z4 / S65340-Z2* / S65340-Z4* | 2.20 | |
mini | S71300-F3 | 2.20 | |
U series | PTZ | U61300-ZY* / U61301-Z1 / U61301-Z2 U65300-ZY* / U65301-Z1* / U65302-Z2* | 2.20 |
Version up contents
Contents | S series | U series | ||||
|---|---|---|---|---|---|---|
Fixed Box/Dome [2MP] | Fixed Box/Dome [5MP/6MP/4K] | 360-degree fisheye | PTZ | mini | PTZ | |
1. Support FTP | Yes | Yes | Yes | Yes | Yes | Yes |
1. Support FTP
How to configure
Added “Transmission protocol” menu.
You can choose FTP or SFTP (Default : SFTP)
FTP / SFTP support status
FTP Serve/Client function will be supported on below models.
| FTP | SFTP | |||
|---|---|---|---|---|---|
Server | Client | Server | Client | ||
X series | Fixed Box/Dome [5MP/4K] | Done | Done | No | No |
S series | Fixed Box/Dome [2MP] | Yes | Yes | No | Done |
Fixed Box/Dome [5MP/6MP/4K] | Yes | Yes | No | Done | |
360-degree fisheye | Yes | Yes | No | Done | |
PTZ | Yes | Yes | No | Done | |
mini | Yes | Yes | No | Done | |
Multi-directional | No | No | No | No | |
U series | Fixed Box/Dome | No | No | No | No |
PTZ | Yes | Yes | No | Done | |