Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 21 Next »

Released versions:

Release note from V1.10 to V2.10 - WV-S1136 etc. / WV-S1536L etc. / WV-S2136LG etc.

This release note applies to the following models:

Version 1.10 or later

WV-S1136

WV-S-2136

WV-S2136L

WV-S2236L

Version 1.11 or later

WV-S1536L

WV-S2536L

WV-S1536LN

WV-S2536LN

Version 1.21 or later

WV-S1536LTN

WV-S2536LTN

Version 1.30 or later

WV-S2136G

WV-S2136LG

WV-S2236LG

WV-S2536LG

WV-S2536LGN

WV-S2136-B

WV-S1536L-B

WV-S1536LN-B

WV-S2136G-B

WV-S2136L-B

WV-S2136LG-B

WV-S2236L-B

WV-S2236LG-B

Version 2.00 or later

WV-S1536LNS

WV-S1536LT

WV-S2536LT

Priority Rank Level

🇦 : Recommended to apply
🇧 : When issue happened
🇨 : Maintenance timing
🇺 : Function / performance improvement

Version 2.23

Release date: December 9, 2022
SDK version: V1.60

Resolved Issues

  • The angle of view returns to the default center position. 🇧
    Occurrence condition:
    When satisfying both of the following conditions:
    - Version 2.10 or 2.20
    - The camera was restarted after adjusting the angle of view using the Extra optical zoom

  • SFTP transmission fails depending on the SFTP server to be connected. 🇨

  • The live image may not appear, as the maximum number of users concurrently accessible to the camera decreases. 🇧
    Occurrence condition:
    When satisfying all of the following conditions:
    - Version 2.10 or 2.20
    - [Internet mode] is set to Off by CGI command
    - H.264/H.265 transmission

  • Unable to set privacy zone from i-PRO Configuration Tool (iCT). 🇨

Version 2.20

Release date: September 30, 2022
SDK version: V1.60

New Features / Improvements

  • Changed the company name in the GlobalSign digital certificate installed on the camera to "i-PRO Co., Ltd." 🇺

  • Supports the FTP function. 🇺 View details

  • Added the HTML initialization function. 🇺 (Added on Nov.11, 2022)
    [Load the default HTML files (setup menu).] and [Reset to the default and load the default HTML files.] have been added to the [Default reset] tab.

Resolved Issues

  • The occupancy detection area information is not included in the HTTP alarm notification from the camera. 🇨

  • The frame rate and bit rate may not recover once they drop due to the environmental cause. 🇨

  • No labels