Table of contents
Introduction
This chapter shows how to install, start, stop or uninstall AdamApps on i-PRO camera.
Only encrypted AdamApp can be installed into i-PRO camera on the market.
Non-encrypted app can be installed only for cameras that you have requested development license for the camera.
Please visit here to request encryption or development license.
There are various methods to install app to camera
Camera web browser is easy way for one camera.
Developer tool “Adam control extension” is also easy way, but this is only for developer.
i-PRO Configuration Tool (iCT) is useful when user wants to install or update app for multiple cameras at the same time.
Control app via WEB API from partner’s system
1. Camera web browser
(1) Access the camera using web browser, http://<ip>.
(2) Move to configuration page [Ext software] - [Software mng.].
(3)Choose File and Execute
(4)Installed app will be appeared with uninstall button.
(5) Start and stop AdamApp
Installed app will start and stop automatically according to “Operation sched.” configuration.
Default is always running.
In addition, AdamApp SDK provides script “startAdamApp.sh” to start AdamApp and “stopAdamApp.sh” to stop it.
A shell script must be executed as indicated below when using “startAdamApp.sh shell script. Note that there are macro variables at the beginning of starAdamApp.sh script that specify the information of the surveillance camera. Please set up these variables with the IP address (IPRO_ADDR), the username (IPRO_USER) and the password (IPRO_PASSWD) before the execution.
$ cd ${SDK_DIR}/tool/adamapp
$ ./startAdamApp <AdamApp’s FuncID (in decimal)>
##### AdamApp Information #####
FUNC_ID=257
INSTALL_ID=0DAF95AC
##### start application result #####
{}
$ cd ${SDK_DIR}/tool/adamapp
$ ./stopAdamApp <AdamApp’s FuncID (in decimal)>
##### AdamApp Information #####
FUNC_ID=257
INSTALL_ID=0DAF95AC
##### stop application result #####
{}
* ${SDK_DIR} is the installation directory.
2. Adam Control Extension (Google Chrome extension tool)
Please refer to here for how to install.
(1) Open Google Chrome (version 6.0 or later), access to camera(http://<ip>) and login in advance.
(2) Click the "Extensions" button on the right side of the address bar in Chrome and click "Adam application manager for i-pro".
(3) Connect with Adam execution environment
Enter the IP address of the camera and click the Connect button.
When you cannot connect, please do step (1), access to the camera in advance.
If you have not accessed the camera using the same browser as in step (1), you will not be able to connect even if you press the "Connect" button.
(4) Install AdamApp
Select an AdamApp to install.
Finish installation.
(5) Start AdamApp
(6) Stop AdamApp
(7) Update AdamApp
(8) Uninstall AdamApp
3. i-PRO Configuration Tool
Download from i-PRO Configuration Tool from https://i-pro.com/products%5fand%5fsolutions/en/surveillance/learning-and-support/tools/ict .
Please refer to the manual for basic usage.
(1)Detect cameras on the network
(2)From the menu [Ext. Software Management]- [App. installation/Update], select cameras that you want to install app, select Partner Applications on right side, select app file and Start.
4. Control app via WEB API from partner’s system
Camera firmware support CGI for app installation “/cgi-bin/adam_install.cgi”, updating “/cgi-bin/addon_update“, and uninstallation ”/cgi-bin/addon_uninstall“. Refer to CGI documentation for the detail.
ADAM WEB API provides start and stop API that are also used in Adam Control Extension (Google Chrome extension tool). Refer to SDK documentation “AdamWebAPI_Specification_Vx_xx.pdf“ for the detail.