Table of contents

Introduction

Here we will explain the steps to build a development environment for the iPRO Camera SDK application using a Docker image. Also, in this tutorial, the SDK installation directory is described as ${SDK_DIR}.

Advance preparation

First, select the OS for development. Choose between Linux OS and Windows OS.

Preparing the Docker environment on Linux OS

The steps here are performed in the following environment.

OS: Ubuntu 22.04.2 LTS (Jammy Jellyfish)

Docker Engine version: 23.0.1

Before installing Docker, uninstall the old version.

sudo apt-get remove docker docker-engine docker.io containerd runc

Install an app that allows you to install Docker.

sudo apt-get update
sudo apt-get install ca-certificates curl gnupg lsb-release

Add Docker's official GPG key.

curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg

Set up a stable Docker repository.

echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null

Install Docker Engine.

sudo apt-get update
sudo apt-get install docker-ce docker-ce-cli containerd.io docker-compose-plugin

The docker command requires root privileges by default, so add the user to the docker group so that it can be executed with user privileges.

sudo gpasswd -a $(whoami) docker

Restart docker daemon or if that doesn't work, restart your PC.

sudo systemctl restart docker

Grant group write permission to docker.sock.

sudo chgrp docker /var/run/docker.sock

Test whether Docker can be used.

docker run --rm hello-world

If the following is displayed, the installation is successful.

Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
2db29710123e: Pull complete 
Digest: sha256:ffb13da98453e0f04d33a6eee5bb8e46ee50d08ebe17735fc0779d0349e889e9
Status: Downloaded newer image for hello-world:latest

Hello from Docker!
This message shows that your installation appears to be working correctly.

To generate this message, Docker took the following steps:
 1. The Docker client contacted the Docker daemon.
 2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
    (amd64)
 3. The Docker daemon created a new container from that image which runs the
    executable that produces the output you are currently reading.
 4. The Docker daemon streamed that output to the Docker client, which sent it
    to your terminal.

To try something more ambitious, you can run an Ubuntu container with:
 $ docker run -it ubuntu bash

Share images, automate workflows, and more with a free Docker ID:
 https://hub.docker.com/

For more examples and ideas, visit:
 https://docs.docker.com/get-started/

If not, please check if it succeeds below.

sudo docker run --rm hello-world

Now restart your PC. (Be sure to reboot.)

Next, copy the SDK zip file inside Ubuntu. Get the SDK here.

Copy the [SDK ZIP file] to any location such as home/[username]. Install unzip on Ubuntu.

sudo apt install unzip

The preparation of the Docker environment on Linux OS is now complete. Proceed to "Prepare the build environment".

Preparing the Docker environment on Windows OS(Windows + Docker Desktop)

When using Docker Desktop, there may be a fee depending on the number of employees and annual income of the company using it. Please see here(Japanese) for accurate information.

If you wish to use it, please refer to the following.
Reference official document(Japanese)

Preparing the Docker environment on Windows OS(Windows + WSL + Docker Engine)

Install WSL. WSL requires Windows 10 version 2004 or higher (build 19041 or higher) or Windows 11. Please see here(Japanese) for details.

Start Powershell and install WSL.

wsl --install

Install Ubuntu 20.04LTS.

wsl --install -d Ubuntu-20.04

Once the installation is complete, an Ubuntu window will appear, allowing you to set your username and password. Here the username is “ipro” and the password is “iPRO12345”.

Install Docker Engine according to the instructions on the site(Japanese) below. At this time, please perform the steps up to the 「Docker Engineのインストール」 chapter. (will not work after that)

Docker Engine インストール（Ubuntu 向け） | Docker ドキュメント (matsuand.github.io)

The docker command requires root privileges by default, so add the user to the docker group so that it can be executed with user privileges.

sudo gpasswd -a $(whoami) docker

Start docker with the following command.

sudo /etc/init.d/docker start

Execute the following command to check the operation. The PC you are running it on must be able to connect to the internet.

docker run --rm hello-world

It is OK if the result is displayed as shown below.

ipro@PC-HP2208N0013R:~$ docker run --rm hello-world
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
719385e32844: Pull complete
Digest: sha256:fc6cf906cbfa013e80938cdf0bb199fbdbb86d6e3e013783e5a766f50f5dbce0
Status: Downloaded newer image for hello-world:latest

Hello from Docker!
This message shows that your installation appears to be working correctly.

To generate this message, Docker took the following steps:
 1. The Docker client contacted the Docker daemon.
 2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
    (amd64)
 3. The Docker daemon created a new container from that image which runs the
    executable that produces the output you are currently reading.
 4. The Docker daemon streamed that output to the Docker client, which sent it
    to your terminal.

To try something more ambitious, you can run an Ubuntu container with:
 $ docker run -it ubuntu bash

Share images, automate workflows, and more with a free Docker ID:
 https://hub.docker.com/

For more examples and ideas, visit:
 https://docs.docker.com/get-started/

To automatically start docker when Ubuntu boots, configure the following settings. You can use the editor of your choice.

nano ~/.bashrc

Add the following line at the end:

sudo /etc/init.d/docker start
sleep 3
sudo docker run --privileged --rm tonistiigi/binfmt --install all

When booting Ubuntu via WSL, we have confirmed a phenomenon where the qemu association disappears when the image is rebooted. The two lines below are provisional responses. If you configure this setting, you will be asked to enter your password when you start Ubuntu with WSL.

Copy the SDK zip file inside Ubuntu. Get the SDK here.
Open Windows Explorer and click Linux → Ubuntu-20.04 from the tree on the left.

Copy the [SDK ZIP file] to any location such as home/[username].
Install unzip on Ubuntu.

sudo apt install unzip

The preparation of the Docker environment on Windows OS is now complete. Proceed to "Prepare the build environment."

Prepare the build environment

After installing Docker, prepare the environment for building the app. For a GUI environment, use Visual Studio Code.

For Windows, please download from the link below.
Visual Studio Code - Code Editing. Redefined

For Linux, download using the command below.

sudo snap install --classic code

You can downgrade the .devcontainer extension from below.

Next, install the Visual Studio Code Dev Containers extension. First, start Visual Studio Code. On Linux, you can start it by typing code in the terminal. Select extensions from the left menu and enter "Dev Containers" in the search window.

Select Dev Containers displayed in the list and press the Install button.

Reference information: Please refer to Developing inside a Container using Visual Studio Code Remote Development “Getting started”.

How to build the app

Extract the SDK file.

Since the SDK zip file has already been placed in any folder, extract it to any folder.

cd [any folder]
unzip iPRO_CAMERA_SDK_Vx_xx_Container.zip

Change to the extracted directory.

cd ${SDK_DIR}

Using Visual Studio Code in a GUI environment

Start Visual Studio Code in ${SDK_DIR}.

code .

Click the >< mark at the bottom left of the screen to open the command palette, then select "Reopen in Container".

Building the Docker image will begin according to .devcontainer/Dockerfile.
You can check the progress by clicking "Starting Dev container (Show logs)" at the bottom right.

Preparation is complete when "Dev Container: iPRO Camera SDK" is displayed to the right of the >< mark at the bottom left of the screen.

Open the Terminal tab at the bottom right. Make sure that "bash" is displayed on the right side.

If bash is not displayed, press the "+" to the right of the section that says "Dev Containers" and select bash.

Configure the environment before making.

• If you want to build an extension app for ambaCV2X

  source setup_env.sh ipro-ambaCV2X

• If you want to build an extension app for ambaCV5X

  source setup_env.sh ipro-ambaCV5X

Now you can build the app. As an example, if you want to build C/C++ skeleton_sample_app, move to the target directory and run make as shown below.

cd ${SDK_DIR}/src/adamapp/skeleton_sample_app/
make

Build the ambaCV2X and ambaCV5X extension apps into one file

Please see here for details.