Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Problem Description　

image-20240607-004656.png

Answer

The camera screen is not accessible, so please activate it in the following way
・Send the CGI command to activate
・Initialize the camera

  1. Send the CGI command to activate
    http://(IP address)/cgi-bin/setdata?LIVE_ACCESS=1

  2. Initialize the camera
    　Press the INITIAL SET button to initialize the main unit. See below for the position of the INITIAL SET button.
    (1) Disconnect the Ethernet cable from the computer and turn off the computer.
    (2) Turn on the computer while pressing the [INITIAL SET] button.
    (3) [INITIAL SET] button holds pressing for 15 seconds or more after power is turned on
    (4) Release the [INITIAL SET] button

  • No labels