Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 8 Next »

Released versions:

This release note applies to the following models:

Version 2.28 or later

WV-U85402-V2L

WV-U85402-V2L1

Priority Rank Level

🇦 : Recommended to apply
🇧 : When issue happened
🇨 : Maintenance timing
🇺 : Function / performance improvement

Version 2.60

Release date: May 31 2024 - Download the latest firmware

New Features / Improvements

  • Changed the font and color on the browser as below:

    • The font of on-screen display (OSD) to Iwata UD 🇺

    • The font of the live and setting windows to NotoSans 🇺

    • The color of i-PPO logo on the live window to black 🇺

  • Added improvements for 3rd party application development. 🇺
    See details at Development Partner Portal.

  • Improved ONVIF communication. 🇺

Resolved Issues

Fixed the following issues including other minor issues:

  • Corrected an issue where some 3rd party applications might not work with version 2.50. 🇨

  • Corrected the response to the following CGI command. 🇨

    • cgi-bin/getdata

    • cgi-bin/get_io2?mode=monitor

  • Added a correction to a message in French. 🇨

Version 2.50

Release date: Feb. 29 2024 - Download the latest firmware

New Features / Improvements

  • Added improvements to enhance security. 🇺
    e.g.,
    - [Subject Alternative Name] field has been added to [CA Certificate - Generate Certificate Signing Request] in HTTPS setting. View detail
    - [Security] tab has been added to the [User mng.] setting. View detail

  • Added improvements to the live and setting windows on the web browser. 🇺
    e.g.,
    - A button to show and hide frame rate and bit rate has been added on the live image. View detail
    - HTTP alarm notification setting has been improved. View detail

  • Improved the response to CGI commands. 🇺
    Refer to Command Document (H.265 supported models) at Device integration - IP Camera / i-PRO page.

  • Improved the image quality. 🇺
    For verification results and restrictions on each browser, refer to "Verification of camera performance with Google Chrome, Firefox, and Microsoft Edge (C0132)" on Technical Information.

  • Improved the connectivity to Video Management Software (VMS). 🇺

  • Improved the ONVIF connection. 🇺

Resolved Issues

  • Fixed minor issues. 🇨

Version 2.49

Release date: Feb. 29 2024 - Download the latest firmware

  • Intermediate firmware version to upgrade from version 2.4x or earlier to version 2.50 or later.

Version 2.40

Release date: Sept 28, 2023 ->Updated on Oct 10: Added items written in red - Download the latest firmware

New Features / Improvements

  • Improved the performance while updating or installing extension software to avoid failure in a slow network. 🇺

  • Enabled [Guest User] by default on the [User auth.] tab in [User mng.] 🇺

  • Improved the response to the following CGI commands. 🇺

    • /cgi-bin/getdata

    • /cgi-bin/get_capability

  • Improved the ONVIF connection. 🇺

  • Improved the data management when updating extension software applications. 🇺

  • Improved the SRTP communication. 🇺

  • Changed the [SNMP] default setting to Off on the [Network] page. 🇺

  • Improved the performance while downloading a video data from an SD memory card in an unstable network. 🇺

  • Supports new CGI commands. 🇺

  • Supports day and night scene switching on the [Schedule] setting. 🇺 View details
    "<Auto-Schedule>Daytime: Image Quality 1/ Night: Image Quality 2" has been added to the [Schedule mode] options.
    *[Scene settings linked to sunrise and sunset times] need to be configured to use this function.

  • Supports ext4 for SD memory card format. 🇺 View details
    [SD Memory Card File System Format] setting has been added to the [SD memory card] page.

  • Added the On/Off setting to the [SNMP agent setting] in [Network]->[Advanced]->[SNMP]. 🇺
    *Default=On

  • Supports a CGI command to start SD recording when an image transmission stops. 🇺 View details

  • Added "1280x720" to the [Image capture size] of Stream(1) and (2). 🇺 View details

  • Supports editing the camera title on the live window. An edit icon appears next to the camera title. 🇺
    Note: Available for administrator only.

  • Supports a command to send HTTP port number to a 3rd party application. 🇺

  • Changed the default DHCP host name from COM MID1 to i-PRO-<MAC address of camera>. 🇺

  • Supports replacing %25 with % in the destination address of HTTP alarm notification. 🇺

  • Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode". 🇺

  • Improved the connectivity with i-PRO Configuration Tool (iCT). 🇺

  • Improved the frame rate during the slow shutter operation under low illuminance condition. 🇺

  • Changed the text color on the log list for the visibility improvement. 🇺

  • Improved the ONVIF connection. 🇺

Resolved Issues

  • Corrected an issue where an mp4 video recorded on an SD memory card could not be played back on the camera. 🇨
    Occurrence condition: Record an mp4 video with [GOP control] set to "Advanced(Fixed GOP 60s w/1s key-frame)"

  • Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion. 🇨
    Occurrence condition: Start sequence display on the recorder while performing SD memory card recording on the camera.

  • Corrected an issue where the angle of view shifted after restarting the camera. 🇨
    Occurrence condition: Use digital zoom in to set the angle of view.

  • Corrected an issue where the [Save trigger] setting of SD memory recording might unexpectedly changed after firmware update. 🇨

  • Corrected an issue where an unnecessary pop-up regarding the bit rate of recording stream appeared. 🇨

  • Corrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting. 🇨

  • Corrected an issue where MQTT notification worked only when [AI analytics target] is set to "Other" for audio detection. 🇨

  • Removed an unnecessary alarm icon shown on setting windows. 🇨

  • Corrected an issue where the non-AI models sent TCP alarm notification of AI sound classification. 🇨

  • Corrected an issue where the mic input volume from the camera became higher than the selected value. 🇨
    Occurrence condition: Change the [Mic input volume] on the live window.

  • Corrected an issue where the camera displayed unavailable options for [Maximum shutter] of Camera 2, 3, and 4 on the live window. 🇨
    Occurrence condition: [Super Dynamic(SD)] is set to "On"

  • Corrected an issue where the camera did not change the [Maximum shutter] setting according to the on/off setting of [Super Dynamic(SD)] for Camera1, on the live window. 🇨

  • Corrected an issue where it was not possible to reinstall an extension software application after uninstalling it. 🇨
    Occurrence condition: The power of camera is turned off while uninstalling the extension software application.

  • Corrected an issue where the camera could not connect to a recorder and VMS on rare occasion. 🇨
    Occurrence condition: TLS1.3 is selected for [HTTPS-Connection].

  • Corrected an issue where H.265/H.264 live image might not appear. 🇨
    Occurrence condition: Network Address Port Translation (NAPT) is configured on the router

  • Corrected an issue where the camera might be slow to start up. 🇨
    Occurrence condition: Multicast auto start is enabled by CGI command.

Version 2.28

Release date: May 22, 2023

  • First mass-production

  • No labels