Released versions:

• Version 2.36

• Version 2.33

• Version 2.30

• Version 2.22 (First production)

This release note applies to the following models:

Priority Rank Level

Version 2.36

Release date: May 31 2023 - Download the latest firmware

Resolved Issues

• Corrected an issue where a short-term communication error could occur on a connected recorder. 🇨
  Occurrence condition:
  - FIrmware version from 2.22 to 2.33
  - [SD backup rec.] is enabled on the recorder connected to the camera.
  

Version 2.33

Release date: March 31, 2023

New Features / Improvements

• Supports ext4 for SD memory card format. 🇺 View details
  [SD Memory Card File System Format] setting has been added to the [SD memory card] page.
  

• Improved the ONVIF connection. 🇺

Resolved Issues

• Corrected an issue where the camera might reboot. 🇨
  Occurrence conditions:
  - The extension software AI-VMD and AI Privacy Guard are installed and enabled on the camera.
  - The camera is connected to a recorder and “SD backup rec.” is enabled on the recorder’s setting.
  

• Corrected an issue where the camera might be slow to start up. 🇨
  Occurrence condition: Multicast auto start is enabled by CGI command.
  

Version 2.30

Release date: February 28, 2023

New Features / Improvements

• Supports new CGI commands. 🇺

• Supports day and night scene switching on the [Schedule] setting. 🇺 View details #1
  "<Auto-Schedule>Daytime: Image Quality 1/ Night: Image Quality 2" has been added to the [Schedule mode] options.
  *[Scene settings linked to sunrise and sunset times] need to be configured to use this function.

• Added the On/Off setting to the [SNMP agent setting] in [Network]->[Advanced]->[SNMP]. 🇺
  *Default=On

• Supports a CGI command to start SD recording when an image transmission stops. 🇺 View details #2

• Supports editing the camera title on the live window. An edit icon appears next to the camera title. 🇺
  Note: Available for administrator only.

• Supports a command to send HTTP port number to a 3rd party application. 🇺

• Changed the default DHCP host name from COM MID1 to i-PRO-<MAC address of camera>. 🇺

• Improved the FTP/SFTP settings as follows 🇺 View details #3
  - Added 2fps and 3fps to the [Transmission interval] options of [Pre alarm] and [Post alarm]
  - Increased the number of SFTP server setting from 1 to2
  - Added "1920x1080" to the [Image capture size] options of [Pre alarm]

• Added 0.5s, 1s, 2s, 3s, and 4s to the [Alarm deactivation time] options. 🇺 View details #4

• Supports replacing %25 with % in the destination address of HTTP alarm notification. 🇺

• Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode". 🇺

• Improved the connectivity with i-PRO Configuration Tool (iCT). 🇺

• Improved [Audio detection] setting so that [AI analytics target] options (Gunshot/ Yell/ Vehicle Horn/ Glass Break) are enabled by default, when [Audio detection] is set to "On". 🇺

• Changed the text color on the log list for the visibility improvement. 🇺

• Improved the frame rate during the slow shutter operation under low illuminance condition. 🇺

• Improved the image quality as follows 🇺
  Image contrast / Auto focus performance during pan-tilt operation / Image brightness during stabilizer operation

• Improved the ONVIF connection. 🇺

• Improved the detection accuracy of people detection for extension software. 🇺

• Supports the extension software AI Scene Change Detection free of charge. 🇺

• Improved the auto tracking performance. 🇺

Resolved Issues

• Corrected an issue where the mic input volume from the camera became higher than the selected value. 🇨
  Occurrence condition: Change the [Mic input volume] on the live window.

• Corrected an issue where it was not possible to reinstall an extension software application after uninstalling it. 🇨
  Occurrence condition: The power of camera is turned off while uninstalling the extension software application.

• Corrected an issue where the camera could not connect to a recorder and VMS on rare occasion. 🇨
  Occurrence condition: TLS1.3 is selected for [HTTPS-Connection].

• Corrected an issue where H.265/H.264 live image might not appear. 🇨
  Occurrence condition: Network Address Port Translation (NAPT) is configured on the router

• Corrected an issue where the image could appear distorted on rare occasion. 🇨
  

Version 2.22

Release date: February 28, 2023

• First mass-production