Released versions:

Click here for the version from V1.30 to V2.21

• Version 2.70

• Version 2.62

• Version 2.61

• Version 2.60

• Version 2.50

• Version 2.40

• Version 2.26

• Version 2.25

• Version 2.24

• Version 2.23

This release note applies to the following models:

Priority Rank Level

Version 2.70

Release date: October 22, 2024

Resolved Issues

Fixed the following issue including other minor issue:

• Corrected an issue where the frame rate might drop.
  Occurrence condition:
  - [Stream encoding format] is H.264
  - [Frame rate] is set to 5fps
  

Version 2.62

Release date: July 10, 2024

Resolved Issues

• Corrected an issue where the live image might not appear on the [VMD area] and [Image quality] setting windows.
  Occurrence conditions: Version 2.50, 2.60 and 2.61
  

Version 2.61

Release date: June 25, 2024

Resolved Issues

• Corrected an issue where the camera might transmit a lower frame rate image than setting.
  Occurrence conditions:
  - [Frame rate] is set to 5fps or 3fps
  - [Stream encoding format] is H.264
  - [Image capture size] is 640x360, 320x180, VGA or QVGA
  

Version 2.60

Release date: May 31 2024

New Features / Improvements

• Changed the font on the browser as below:

  • The font of on-screen display (OSD) to Iwata UD

Resolved Issues

• Corrected an issue where some 3rd party applications might not work with version 2.50.

• Corrected an issue where the camera might reboot when [Maximum shutter] is set to "Max.4/30s" on rare occasion.
  

Version 2.50

Release date: Feb. 29 2024

New Features / Improvements

• Added an improvement to enhance security.

• Added improvements to the live and setting windows on the web browser.

• Improved the response to CGI command.

Resolved Issues

• Fixed minor issues.
  

Version 2.40

Release date: Sept 28, 2023

New Features / Improvements

• Improved the performance while updating or installing extension software to avoid failure in a slow network.

• Improved the response to the following CGI commands.

  • /cgi-bin/getdata

  • /cgi-bin/get_capability

• Improved the performance while downloading a video data from an SD memory card in an unstable network.

Resolved Issues

• Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion.
  Occurrence conditions: Start sequence display on the recorder while performing SD memory card recording on the camera.

• Corrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting.
  

Version 2.26

Release date: July 28, 2023

New Features / Improvements

• Improved the productivity at production line.
  

Version 2.25

Release date: March 31, 2023

New Features / Improvements

• Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode".
  

Version 2.24

Release date: February 28, 2023

New Features / Improvements

• Supports new CGI commands.

• Changed the default DHCP host name from COM MID1 to i-PRO-<MAC address of camera>.

• Supports replacing %25 with % in the destination address of HTTP alarm notification.

• Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode".

• Changed the text color on the log list for the visibility improvement.

Resolved Issues

• HTTPS connection is not available until the [Connection] setting is once switched from "HTTP" to "HTTPS", on the HTTPS setting page in the [Advanced] window.

• It it not possible to reinstall an extension software application after uninstalling it.
  Occurrence condition: The power of camera is turned off while uninstalling the extension software application.

• The camera cannot connect to a recorder and VMS on rare occasion.
  Occurrence condition: TLS1.3 is selected for [HTTPS-Connection].

• H.265/H.264 live image may not appear.
  Occurrence condition: When satisfying all of the following conditions:
  - Version 2.10 or later
  - Network Address Port Translation (NAPT) is configured on the router
  

Version 2.23

Release date: December 9, 2022

Resolved Issues

• The live image may not appear, as the maximum number of users concurrently accessible to the camera decreases.
  Occurrence condition: When satisfying all of the following conditions:
  - Version 2.10 or 2.21
  - [Internet mode] is set to Off by CGI command
  - H.264/H.265 transmission