Mar. 2024
Overview - Mar. 2024
Target products
Target products | Version |
|---|---|
AI-VMD | 3.50 |
AI Occupancy Detection | 1.90 |
AI-VMD / AI People Counting for 360-degree fisheye | 1.90 |
AI Scene Change Detection | 1.90 |
Version up contents
| AI-VMD | AI Occupancy Detection | AI-VMD / AI People Counting for 360-degree fisheye | AI Scene Change Detection |
|---|---|---|---|---|
1. Increase the range of “The Interval for the transmission of ONVIF” | ☑️ | ☑️ | ☑️ |
|
2. Support notification when intruder/loitering detection stops | ☑️ |
| ☑️ |
|
3. Support AI Processing Relay for X series Bullet/Dome camera | ✅ | ✅ |
| ☑️ |
☑️ : Version up target ✅ : Supported in previous versions
1. Increase the range of “The Interval for the transmission of ONVIF”
Note: Changes are underlined in the table below.
Before | 15 sec / 1 min |
After | 5 sec / 10 sec / 15 sec / 1 min |
2. Support notification when intruder/loitering detection stops
"Alarm notification at the completion of detection” setting has been added to AI-VMD detailed settings.
Set this menu to “On” if you want to be notified when intruder/loitering detection has stopped.
_.png?version=1&modificationDate=1709169528670&cacheVersion=1&api=v2&width=730&height=44)
3. Support AI Processing Relay for X series Bullet/Dome camera
For details of "AI Processing Relay", please refer to the following site.
https://i-pro.com/products_and_solutions/en/surveillance/products/ai-processing-relay
Supported by X series Bullet/Dome camera (V3.01 or later).
Jan. 2024 <vol.2>
Overview - Jan. 2024 <vol.2>
Target products
Target products | Version |
|---|---|
AI-VMD | 3.42 |
AI People Detection | 1.81 |
AI Vehicle Detection | 1.81 |
AI Occupancy Detection | 1.81 |
AI Processing Relay | 1.81 |
Version up contents
| AI-VMD | AI People Detection | AI Vehicle Detection | AI Occupancy Detection | AI Processing Relay |
|---|---|---|---|---|---|
1. Support X series Bullet/Dome camera | ✅ | ✅ | ✅ | ✅ | ☑️ |
2. Support AI Processing Relay for X series Bullet/Dome camera | ☑️ | ☑️ | ☑️ | ☑️ |
|
☑️ : Version up target ✅ : Supported in previous versions
1. Support X series Bullet/Dome camera
Support the following models.
Bullet camera :
WV-X15700-V2LN / X15600-V2LN / X15500-V3LN / X15300-V3LN
WV-X15700-V2L / X15600-V2L / X15500-V3L / X15300-V3L
Dome camera :
WV-X25700-V2LN / X25600-V2LN / X25500-V3LN / X25300-V3LN
WV-X22700-V2L / X22600-V2L / X22500-V3L / X22300-V3L
2. Support AI Processing Relay for X series Bullet/Dome camera
For details of "AI Processing Relay", please refer to the following site.
https://i-pro.com/products_and_solutions/en/surveillance/products/ai-processing-relay
Supported by X series Bullet/Dome camera (V3.01 or later).
Jan. 2024 <vol.1>
Overview - Jan. 2024 <vol.1>
Target products
Target products | Version |
|---|---|
AI-VMD | 3.41 |
AI Privacy Guard | 1.80 |
AI Face Detection | 1.80 |
AI People Detection | 1.80 |
AI Vehicle Detection | 1.80 |
AI Non Mask Detection | 1.80 |
AI Occupancy Detection | 1.80 |
AI Scene Change Detection | 1.80 |
Version up contents
| AI-VMD | AI Privacy Guard | AI Face Detection | AI People Detection | AI Vehicle Detection | AI Non Mask Detection | AI Occupancy Detection | AI Scene Change Detection |
|---|---|---|---|---|---|---|---|---|
1. Support X series Bullet/Dome camera | ☑️ | ☑️ | ☑️ | ☑️ | ☑️ | ☑️ | ☑️ | ☑️ |
2. Support AI On-site Learning | ☑️ |
|
|
|
|
|
|
|
☑️ : Version up target ✅ : Supported in previous versions
1. Support X series Bullet/Dome camera
Support the following models.
Bullet camera :
WV-X15700-V2LN / X15600-V2LN / X15500-V3LN / X15300-V3LN
WV-X15700-V2L / X15600-V2L / X15500-V3L / X15300-V3L
Dome camera :
WV-X25700-V2LN / X25600-V2LN / X25500-V3LN / X25300-V3LN
WV-X22700-V2L / X22600-V2L / X22500-V3L / X22300-V3L
2. Support AI On-site learning
For details of "AI On-site Learning", please refer to the following site.
https://i-pro.com/products_and_solutions/en/surveillance/products/ai-site-learning
Oct. 2023
Overview - Oct. 2023
Target products
Target products | Version |
|---|---|
AI-VMD | 3.31 |
AI-VMD / AI People Counting for 360-degree fisheye | 1.70 |
Version up contents
| AI-VMD | AI-VMD / AI People Counting for 360-degree fisheye |
|---|---|---|
1. Support camera with secure elements | ✅ | ☑️ |
2. Improve demo screen | ✅ | ☑️ |
3. Extend the storage period of count data (CSV) to 2 years | ☑️ |
|
☑️ : Version up target ✅ : Supported in previous versions
1. Support camera with secure elements
Support the following models.
360-degree fisheye Camera :
WV-S4156A / S4176A / S4556LA / S4576LA / S4556LMA / S4576LMA
2. Improve demo screen
Add a setting button to show/hide setting items such as "Display score".
Add “Threshold setting” and “Height setting”.
Support show/hide setting items
You can make the screen easier to see by hiding the setting items.
Demo screen of AI-VMD / AI People Counting for 360-degree fisheye
Add “Height setting” and “Threshold setting”.
Detection score
Display score : Show/hide detection score.
Measure score : Start/stop measurement of the maximum/minimum detection score.
Hight setting
Select the height at which the camera is installed.
Threshold setting
Set the threshold of human(head/body)/vehicle detection.
3. Extend the storage period of count data (CSV) to 2 years
| Before | After |
|---|---|---|
Storage period | 92 days | 2 years (732 days) |
Aug. 2023
Overview - Aug. 2023
Target products
Target products | Version |
|---|---|
AI-VMD | 3.30 |
AI People Detection | 1.70 |
AI Vehicle Detection | 1.70 |
AI Occupancy Detection | 1.70 |
AI Scene Change Detection | 1.70 |
Version up contents
| AI-VMD | AI People Detection | AI Vehicle Detection | AI Occupancy Detection | AI Scene Change Detection |
|---|---|---|---|---|---|
1. Support X/S series Compact dome camera | ☑️ | ☑️ | ☑️ | ☑️ | ☑️ |
2. Support camera with secure elements | ☑️ | ☑️ | ☑️ | ☑️ | ☑️ |
3. Improve demo screen | ☑️ |
|
| ☑️ |
|
4. Support "Add detection frame information to video data” setting | ✅ |
|
| ☑️ |
|
5. Support “Saving count data in csv format“ setting |
|
|
| ☑️ |
|
☑️ : Version up target ✅ : Supported in previous versions
1. Support X/S series Compact dome camera
Support the following models.
4MP model :
WV-X35402-F2LM / X35402-F2L / S35402-F2L / S35402-F2LG / S35402-F2L1
WV-S32402-F2L / S32402-F2LG / S32402-F2L1
2MP model :
WV-X35302-F2LM / X35302-F2L / S35302-F2L / S35302-F2LG / S35302-F2L1
WV-S32302-F2L / S32302-F2LG / S32302-F2L1
2. Support camera with secure elements
Support the following models.
Bullet / Box Camera :
WV-S1136A / S1536LA / S1536LA-B / S1536LNA / S1536LNA-B / S1536LNSA / S1536LTA / S1536LTNA
Dome Camera :
WV-S2136A / S2136A-B / S2136GA / S2136GA-B / S2136LA / S2136LA-B / S2136LGA / S2136LGA-B
WV-S2236LA / S2236LA-B / S2236LGA / S2236LGA-B, S2536LA / S2536LGA / S2536LGNA / S2536LNA
WV-S2536LTA / S2536LTNA
i-PRO mini :
WV-S71300A-F3
3. Improve demo screen
Add a setting button to show/hide setting items such as "Display score".
Add “Threshold setting”.
Support show/hide setting items
You can make the screen easier to see by hiding the setting items.
Demo screen of AI-VMD
Add “Threshold setting”.
Detection score
Display score : Show/hide detection score.
Measure score : Start/stop measurement of the maximum/minimum detection score.
Threshold setting
Set the threshold of human/vehicle/bicycle detection.
Demo screen of AI Occupancy Detection
Add “Threshold setting”.
Detection score
Display score : Show/hide detection score.
Measure score : Start/stop measurement of the maximum/minimum detection score.
Threshold setting
Human(Head/Body) identification threshold : Set the threshold of human(head/body) detection.
Minimum size of detectable human (pixel) : Input the minimum number of pixels (horizontal width) for detection.
4. Support "Add detection frame information to video data" setting
Setting value | Details |
|---|---|
On | Add detection information to video data. *If you want to display the detection frame with WV-ASM300 or iCT, set it to On. |
Off | Does not add detection information to video data. |
5. Support “Saving count data in csv format“ setting
.png?version=1&modificationDate=1690794339364&cacheVersion=1&api=v2&width=680&height=44)
Setting value | Details |
|---|---|
On | Count data is saved in built-in memory in CSV format. *2 years of count data can be saved. |
Off | Count data is not saved. *Count data transmission is possible via HTTP/MQTT even if Off is selected. |
Feb. 2023
Overview - Feb. 2023
Target products
Target products | Version |
|---|---|
AI-VMD | 3.20 |
AI Occupancy Detection | 1.60 |
AI-VMD / AI People Counting for 360-degree fisheye | 1.50 |
Supported camera versions
Model | Version |
|---|---|
S1136 / S1536* / S2136* / S2236L / S2536* | 2.30 or later |
S15500* / S15600* / S15700* S22500* / S22600* / S22700* / S25500* / S25600* S25700* | 2.30 or later |
S4156 / S4176 / S4556* / S4576* | 2.30 or later |
S61301-Z2 / S61302-Z4 / S61501-Z1 / S65340-Z2* / S65340-Z4* / S65501-Z1* | 2.30 or later |
S71300-F3 | 2.30 or later |
S8543* / S8544* / S8563L* / S8564L* / S8573L* / S8574L* | 2.30 or later |
Version up contents
| AI-VMD | AI Occupancy Detection | AI-VMD / AI People Counting for 360-degree fisheye |
|---|---|---|---|
1. Add choices of sending interval of count data via MQTT/HTTP | ☑️ | ☑️ | ☑️ |
2. Add name setting for count line/area | ☑️ | ☑️ | ☑️ |
3. Add detection score measurement function | ☑️ | ☑️ | ☑️ |
4. Support “Perpendicular angle mode" for multi-directional camera | ☑️ |
|
|
5. Add alarm condition setting | ☑️ |
|
|
☑️ : Version up target ✅ : Supported in previous versions
1. Add choices of sending interval of count data via MQTT/HTTP
The sending interval of count data can be set to less than 1 minute.
Note: Changes are underlined in the table below.
Before | 1min / 5min / 10min / 15min / 30min / 60min |
After | 5sec / 10sec / 15sec / 1min / 5min / 10min / 15min / 30min / 60min |
2. Add name setting for count line/area
Supported by Dashboard of i-PRO Active Guard (V1.6.0 or later).
3. Add detection score measurement function
AI-VMD demo screen in camera browser or iCT
1. Measure score
Start/stop measurement of the maximum/minimum detection score.
On: start measurement
Off: stop measurement
2. Detection score (MAX/MIN)
Display the maximum/minimum detection score for objects (Human/Vehicle/Bicycle) while the measurement is running.
When there are different people or vehicles detected, consolidated score will be shown.
4. Support “Perpendicular angle mode" for multi-directional camera
AI-VMD | Before | After |
|---|---|---|
Normal angle mode | Yes | Yes |
Perpendicular angle mode | No | Yes |
Mode selection is possible for each sensor.
5. Add alarm condition setting
Add “Judgement of movement distance” setting to AI-VMD alarm condition settings.
This menu will allow you to set the alarm threshold for moving objects.
Setting value | Details |
|---|---|
Off | The alarm will be triggered even when the movement of the object is tiny. It can be used in scenes where the object moves from the back to the front and the camera tilt angle is shallow. Use this when detection is not possible even when "Low" is set. |
Low | The alarm will be triggered even when the movement of the object is small. It can be used in scenes where the object moves from the back to the front and the camera tilt angle is shallow. |
Middle | Default |
High | The alarm will be triggered only when a significant movement of an object is detected, which may be helpful when you want to reduce the number of false positive alarms caused by small movements. |
When adjusting this setting, please use it after confirming the operation.
Sep. 2022
Overview - Sep. 2022
Target products
Target products | Version |
|---|---|
AI-VMD | 3.10 |
AI Face Detection | 1.30 |
AI People Detection | 1.30 |
AI Vehicle Detection | 1.30 |
AI Non Mask Detection | 1.40 |
AI Occupancy Detection | 1.50 |
AI-VMD / AI People Counting for 360-degree fisheye | 1.40 |
Supported camera versions
Model | Version |
|---|---|
X1551LN, X1571LN, X2251L, X2271L, X2551LN, X2571LN | 2.02 |
S1136, S1536*, S2136*, S2236L, S2536* | 2.20 |
S15500*, S15600*, S15700*, S22500*, S22600*, S22700*, S25500*, S25600*, S25700* | 2.20 |
S4156, S4176, S4556*, S4576* | 2.20 |
S65340*, S61301-Z2, S61302-Z4 | 2.20 |
S71300-F3 | 2.20 |
S8543*, S8544*, S8563L*, S8564L*, S8573L*, S8574L* | 2.20 |
Version up contents
AI-VMD | AI Face Detection | AI People Detection | AI Vehicle Detection | AI Non Mask Detection | AI Occupancy Detection | AI-VMD / AI People Counting for 360-degree fisheye | |
|---|---|---|---|---|---|---|---|
1. Support PTZ [5MP] | Yes | Yes | Yes | Yes | Yes | Yes | No |
2. Support MQTT alarm | Yes | No | No | No | No | Yes | Yes |
3. Change identification sensitivity to identification threshold | Yes | Yes | Yes | Yes | No | Yes | Yes |
4. Add AI-VMD demo screen | Yes | No | No | No | No | No | Yes |
5. Add application operation status display for AI People Detection | No | No | Yes | No | No | No | No |
1. Support PTZ (5MP)
Support the following models.
S65501-Z1 / S65501-Z1G / S61501-Z1
2. Support MQTT alarm
Support alarm notification using MQTT.
Setting items | Settings |
|---|---|
MQTT alarm notification setup >> | Displays the MQTT setting screen. (*1) |
Transmission | Set whether to enable send. |
Topic | Set the name of the MQTT topic to send. |
QoS | Select a level from 0, 1, 2. |
Retain | Select to save the last notified message on the MQTT server. |
*1 To send alarm using MQTT, it is necessary to enable MQTT on the setting screen of camera settings. Information such as the destination server address and port number is set on camera settings.
3. Change identification sensitivity to identification threshold
Changed from "sensitivity" to "threshold" to allow for more intuitive adjustment by checking the detection score displayed on the demo screen.
*An alarm will occur when the "detection score" exceeds the "threshold".
*Example: If you want to suppress false negative alarms, adjust the "threshold" to a value lower than the "detection score" of the target object displayed on the demo screen.
Motion detection threshold : 1 - 8
Human/Vehicle/Bicycle identification threshold : 1 - 100
For “AI-VMD / AI People Counting for 360-degree fisheye”, it is possible to adjust the threshold values for head and whole body identification separately.
*Example: If you want to suppress false positive alarms for objects that are falsely detected as human heads, adjust the "Human identification threshold (head)" to a value higher than the “detection score”.
4. Add AI-VMD demo screen
Demo screen allows to check AI-VMD detection status and detection scores.
5. Add application operation status display for AI People Detection
Support checking the operation status of AI People Detection on the "Software mng." screen of the browser.
The initial status is "Application status: Stop", but when accessed with iCT or i-PRO Active Guard, it automatically changes to "Application status: Running".
To return to "Application status : Stop", you need to uninstall AI People Detection.
Please note that when "Application status: Running" is displayed, the frame rate is limited to 15fps for the following models.
X series 4K Fixed model : X1571LN, X2271L, X2571LN
S series 6MP/4K Fixed model : S15600*, S15700*, S22600*, S22700*, S25600*, S25700*