Released verisons:

...

• Corrected the message that may appear in case of WV-ASM300 double startup using the Windows startup function and desktop shortcut at a PC startup, from "It is impossible to start the operation software unless the setup software is closed." to "ASM300 has already started." 🇨

• WV-ASM300 restarts. 🇧
  Occurrence frequency: High
  Occurrence condition:
  Save the setting change on the [System]-> [Basic setup] under the following condition
  - when [Quick download Download time] is blank

  Note: [Quick download Download time] becomes blank after loading a setup file converted from WV-ASM200 on the WV-ASM300 version 1.00, 1.01, 1.02 or 1.03

• WV-ASM300 restarts and performs auto login without displaying login window at auto logout. 🇨
  Occurrence frequency: Low
  Occurrence condition:
  When [Auto logout] is set to 1min / 5min / 10min / 15min / 30min / 60min (other than OFF) and one of the following cases occurs.

  Case1 - The search window does not finish searching by the auto logout time set in [Auto logout]

  Case2 - Auto logout occurs while operating cameras using WV-CU980 or CU950

• WV-ASM300 restarts and performs auto login without displaying login window at auto logout. 🇧
  Occurrence frequency: High
  Occurrence condition:
  When satisfying both of the following conditions:
  - [Auto logout] is set to 1min / 5min / 10min / 15min / 30min / 60min (other than OFF)
  - Auto logout occurs while WV-ASM300 is displaying the pop-up message that appear when "3D dewarp" is enabled

• WV-ASM300 incorrectly changes the displayed image when [Full screen display] is clicked, from the user selected image to the image previously displayed by clicking "Live" or Play" button of the alarm notification window. 🇨
  Occurrence frequency: High
  Occurrence condition:
  When satisfying both of the following conditions:
  - Version 5.10, 5.11, 5.12, or 5.13
  - New alarm notification window is displayed while WV-ASM300 is switching to full-screen display

...