Released versions:

Click here for the release note from V1.00 to V5.13

• Version 7.40

• Version 7.31

• Version 7.30

• Version 7.20

• Version 7.10

• Version 7.00

• Version 6.20

• Version 6.10

• Version 6.00

Priority Rank Level

Version 7.40

Release date: November 26, 2024
From this version, this software cannot be installed in Windows 10 version 1809 or earlier PC.
Please update to version 1909 or later by Windows Update.

New Features / Improvements

• Supports new cameras
  Indoor PTZ:
  WV-S61602-Z3, WV-S61702-Z3
  Aero PTZ:
  WV-X67300-Z4-3, WV-X67300-Z4L3, WV-X67301-Z4L3, WV-X67310-Z4-1, WV-X67310-Z4-3, WV-X67310-Z4L1, WV-X67310-Z4L3, WV-X67311-Z4L3, WV-X67700-Z3-3, WV-X67700-Z3L3, WV-X67701-Z3L3, WV-X67710-Z3-1, WV-X67710-Z3-3, WV-X67710-Z3L1, WV-X67710-Z3L3, WV-X67711-Z3L3
  High zoom bullet:
  WV-S15301-Z1L, WV-S15301-Z1LN, WV-S15501-Z1L, WV-S15501-Z1LN, WV-S15501-Z3L, WV-S15501-Z3LN, WV-S15701-Z3L, WV-S15701-Z3LN, WV-X15301-Z1L, WV-X15301-Z1LN, WV-X15302-Z1L, WV-X15302-Z1LN, WV-X15501-Z1L, WV-X15501-Z1LN, WV-X15501-Z3L, WV-X15501-Z3LN, WV-X15502-Z1L, WV-X15502-Z1LN, WV-X15701-Z3L, WV-X15701-Z3LN

• Supports new recorder versions. View details
  - Version 1.30 of WJ-NX310K(G), NX410K(G), and NX510K(G)
  - Version 1.50 of WJ-NU101K(G), WJ-NU201K(G), WJ-NU300K(G) and WJ-NU301K(G)
  - Version 5.60 of WJ-NX100, NX200, NX300, and NX400 (To be released in Nov. 2024)

• Added a [Quick Download Save to] setting to the [Basic setup] to designate the folder to save the data. View details

• Removed some unnecessary pop-up messages.

Resolved Issues

• Corrected an issue where video downloads from a recorder failed.
  Occurrence conditions:
  - HTTPS communication between the recorder and this software
  - [Certificate expiration check] is set to ON in [Secure communication setup]
  - [Date format] is set to “Mmm/DD/YYYY” or “DD/Mmm/YYYY”
  

Version 7.31

Release date: July 24, 2024

Resolved Issues

• Corrected an issue where camera/recorder registration might fail.
  Occurrence conditions:

  • Version 7.30 on Windows 10 OS

  • Communication method between the camera/recorder and ASM300 is HTTPS/TLS1.3
    

Version 7.30

Release date: June 27, 2024

New Features / Improvements

• Supports new cameras
  Corner camera: WV-X25580-F2LN2

• Supports new recorder versions.
  - Version 1.20 of WJ-NX310K(G), NX410K(G), and NX510K(G)
  - Version 1.40 of WJ-NU101K(G), WJ-NU201K(G), WJ-NU300K(G) and WJ-NU301K(G)
  - Version 5.50 of WJ-NX100, NX200, NX300, and NX400 (To be released in July 2024)

• Support displaying a progress bar while starting this software.

• Support TLS1.3 for the connection with cameras and recorders.
  *Due to this change, on Windows 10 version 1809 or earlier PC, a pop-up message that says .NET framework version 4.8 is required might appear. In this case, install .NET framework 4.8 following the message.

• [Demo edition] Support i-PRO Active Guard Plug-in for WV-ASM300 during the trial period (90 days).

Resolved Issues

• Corrected an issue where live images via a recorder/recorders might not appear for a few seconds, on rare occasion.
  

Version 7.20

Release date: Apr 24, 2024

New Features / Improvements

• Changed the font on the screen to “Noto Sans”.

• Added an update to SSL communication for security certificate.

Resolved Issues

• Corrected an issue where this software might not start due to other application on the PC, on rare occasion.

• Corrected an issue where the information on the status bar might not be updated on the operation window.

• Corrected an issue where the image switching might be slow on rare occasion.

• Corrected an issue where i-PRO Active Guard Event window did not work after executing [Load the setup file] on the [Save/Load] tab.
  *The following error message appears when this issue happens:
  Failed to open the alarm notification port. Please review the alarm notification port.
  

Version 7.10

Release date: Feb 15, 2024

New Features / Improvements

• Supports new cameras
  Compact dome: WV-S32402-F2L, WV-S32402-F2L1, WV-S32402-F2LG, WV-S35402-F2L, WV-S35402-F2L1, WV-S35402-F2LG, WV-X35402-F2L, WV-X35302-F2L, WV-U35401-F2L, WV-U31401-F2L, WV-U35401-F2LG, WV-U31401-F2LG, WV-U31301-F2L, WV-U35301-F2L, WV-U35301-F2LG, WV-U31301-F2LG
  X-series AI camera: WV-X15700-V2L, WV-X15700-V2LN, WV-X22700-V2L, WV-X25700-V2LN, WV-X15600-V2L, WV-X15600-V2LN, WV-X22600-V2L, WV-X25600-V2LN, WV-X15500-V3L, WV-X15500-V3LN, WV-X22500-V3L, WV-X25500-V3LN, WV-X15300-V3L, WV-X15300-V3LN, WV-X22300-V3L, WV-X25300-V3LN

• Supports new recorder versions. View details
  - Version 1.10 of WJ-NX310K(G). NX410K(G), and NX510K(G)
  - Version 1.30 of WJ-NU101K(G), WJ-NU201K(G), WJ-NU300K(G) and WJ-NU301K(G)
  - Version 5.40 of WJ-NX100, NX200, NX300, and NX400

• Added a "Display of confirmation message before starting Live or Map window" on/off setting to the [GUI display setup] tab. (Default is Off)

• Corrected the file name displayed on [Download] window while downloading recorded data from a recorder.

• Added messages to clarify the error or situation.
  1. When this software is not connected to a valid network adapter during the initial license registration, “No valid network adapter was found. This software will terminate. Please check your network adapter” will appear.
  2. When setting change is made properly in the following setting tabs, a completion message will appear.
  - [Setting]-> [User Management]-> [Basic setup], [Administrator setup], and [User level setup] tabs
  - [Default screen]-> [Operation window] and [Live window] tabs
  - [Setting]-> [Communication]-> [TCP alarm notification reception] tab

• Added event notification messages that appear when “Timeline display” is switched between on and off in the [Timeline] tab.
  Displayed messages: Timeline service was started. / The timeline service has been terminated.

• Improved the on-screen display (OSD) on the 3D dewarp image of 360-degree fisheye camera on the operation window.

Resolved Issues

• Corrected an issue that caused an unnecessary service connection error of timeline even when the timeline setting is off.

• Corrected an issue where the information on the status bar might not be updated on the operation window.
  

Version 7.00

Release date: Oct 27, 2023

New Features / Improvements

• Supports new cameras
  - Rapid PTZ : WV-S66700-Z3L, WV-X66700-Z3LS, WV-S66600-Z3L, WV-X66600-Z3LS, WV-S66300-Z4L, WV-X66300-Z4LS, WV-S66300-Z3L, WV-X66300-Z3LS, WV-S66700-Z3, WV-X66700-Z3S, WV-S66600-Z3, WV-X66600-Z3S, WV-S66300-Z4, WV-X66300-Z4S, WV-S66300-Z3, WV-X66300-Z3S
  - Compact dome : WV-S32302-F2L, WV-S32302-F2L1, WV-S32302-F2LG, WV-S35302-F2L, WV-S35302-F2L1, WV-S35302-F2LG

• Supports new recorders:
  WJ-NX310K(G), WJ-NX410K(G), WJ-NX510K(G)

• Added the following information to the data of [Save information for failure analysis].
  - Application log, display’s information, sound device informaiton, and service list.

• Added a note of allowed and prohibited characters to the setting windows of user name and password.

Resolved Issues

• Corrected an issue where [Audio output] to the following cameras did not work.
  WV-S8543, WV-S8543G, WV-S8544, WV-S8544G, WV-S8543L, WV-S8543LG, WV-S8544L, WV-S8544LG, WV-S8563L, WV-S8563LG, WV-S8564L, WV-S8564LG, WV-S8573L, WV-S8573LG, WV-S8574L, WV-S8574LG
  Occurrence conditions: JPEG is selected for the compression method of the camera.
  

Version 6.20

Release date: June 28, 2023

New Features / Improvements

• Supports new cameras
  - WV-U11300-V2, WV-U21300-V2L
  - WV-S1136A, WV-S1536LA, WV-S1536LA-B, WV-S1536LNA, WV-S1536LNA-B, WV-S1536LNSA, WV-S1536LTA, WV-S1536LTNA, WV-S2136A, WV-S2136A-B, WV-S2136GA, WV-S2136GA-B, WV-S2136LA, WV-S2136LA-B, WV-S2136LGA, WV-S2136LGA-B, WV-S2236LA, WV-S2236LA-B, WV-S2236LGA, WV-S2236LGA-B, WV-S2536LA, WV-S2536LGA, WV-S2536LGNA, WV-S2536LNA, WV-S2536LTA, WV-S2536LTNA, WV-S4156A, WV-S4176A, WV-S4556LA,WV-S4576LA, WV-S71300A-F3

• Supports new recorder versions View details
  - Version 5.30 of WJ-NX100, NX200, NX300, and NX400
  - Version 1.20 of WJ-NU101K(G), WJ-NU201K(G), WJ-NU300K(G) and WJ-NU301K(G)

• Added the following event notification message that appears when WV-ASM300 cannot display the timeline on Operation window.
  Displayed message: The amount of data on the timeline may exceed the OS limit.

• Added support for external storage media to [Save information for failure analysis].
  Note: The following message appears when an external storage media is selected. Confirm and click “OK” to proceed.　
  Displayed message: This software may restart if the external media is removed while saving information for failure analysis. Please be careful.

Resolved Issues

• Corrected an issue where PTZ positions moved on the image of Stream(2) during the mouse operation on 3D dewarp image of Stream(1).
  Occurrence condition:
  - 360 degree fisheye camera
  - [Image capture mode] is set to “Fisheye+Quad PTZ”
  - Mouse operation on a 3D dewarp image

• Corrected an issue where the first alarm/event notification message after starting this software did not appear.
  Occurrence condition:
  - In Windows display setting, [Scale and layout] is set to 125%

• Corrected an issue where the 4-screen function button did not work on WV-CU950 and WV-CU980 connected to WV-ASM300.
  Occurrence condition:
  In [Basic setup], [Operation window (multi-screen) with the maximum number of areas] is set to "5-screen" or "9-screen"
  

Version 6.10

Release date: February 28, 2023

New Features / Improvements

• Supports new cameras
  - WV-S61501-Z1, WV-S65501-Z1, WV-S65501-Z1G View details #1
  - WV-S85402-V2L, WV-S85402-V2L1, WV-S85702-F3L, WV-S85702-F3L1, WV-U85402-V2L, WV-U85402-V2L1 View details #3
  - WV-X86530-Z2, WV-X86530-Z2-1, WV-X86531-Z2, WV-X86531-Z2-1 View details #2

• Supports new recorder versions View details #4
  - Version 5.20 of WJ-NX400K, WJ-NX300, WJ-NX200 and WJ-NX100.
  - Version 1.10 of WJ-NU101K(G), WJ-NU201K(G), WJ-NU300K(G), WJ-NU301K(G)

• Added [Display the reset device] on/off setting* for "Device error log" and "Network error log" on the [Maintenance]-> [Application tab].
  *On: Shows all logs
  Off: Excludes recovered errors and shows on-going errors only

• Added [Enable information acquisition for failure analysis] on/off setting and [Save information for failure analysis] button to the [Save/Load] window in [Maintenance], to acquire WV-ASM300 and PC logs at once. View details #5

• Added the following warning message when SSL is set to OFF.
  Displayed message: SSL is set to off. You are constantly exposed to security threats such as spoofing and tampering due to unauthorized access from third parties. For SSL-enabled devices, consider turning SSL on.

Resolved Issues

• Corrected an issue where this software displayed camera information such as camera title on the live monitor even when it is set to "Hide".
  Occurrence condition:
  - [Alarm camera direct live window] is set to ON
  - The live image has been switched to the image with alarm occurrence, and then switched back to the previous live image.

• Corrected an issue where the images on a multi-screen display became black.
  Occurrence conditions: Change the camera setting in the following steps.
  1. Set [Live image source] from Recorder to Camera
  2. Set [Stream type] to AUTO, [Compression] to H.265 or H.264, and save the changes.
  3. Change [Compression] to M-JPEG and save the changes.

• Corrected an issue where this software might not start and keep showing "Database is being updated."
  Occurrence condition: Start this software soon after the PC reboot at WV-ASM300 version upgrade.
  

Version 6.00

Release date: December 12, 2022

New Features / Improvements

• Supports new cameras View details
  WV-S61300-ZY, WV-S61300-ZYG, WV-S61301-Z1, WV-S65300-ZY, WV-S65300-ZYG, WV-S65301-Z1, WV-S65301-Z1-1, WV-S65301-Z1G, WV-S65301-Z1S, WV-S65302-Z2, WV-S65302-Z2-1, WV-S65302-Z2G, WV-S65340-Z2G, WV-S65340-Z2N1, WV-S65340-Z4G, WV-S65340-Z4N1, WV-S1536LT, WV-S2536LT

• Supports new recorders View details
  WJ-NU101KP/KG, WJ-NU201KP/KG, WJ-NU300KP/KG, WJ-NU301KP/KG

• Improved to monitor the usage rate of both virtual memory and physical memory by the [PC performance monitoring] function. A warning message appears when the usage rate exceeds the upper limit configured in [Upper limit of memory usage rate (1 to 100%, default: 95%) ]* View details
  *The function name has changed from [Upper limit of physical memory usage rate (1 to 100%, default: 95%)] to [Upper limit of memory usage rate (1 to 100%, default: 95%) ] from this version.

• Improved to display a progress bar when starting this software requires time.

• Added the following notes to the pop-up message displayed when "3D dewarp" is enabled, to notify that the image of 360-degree fisheye camera may not appear correctly depending on the built-in video card.

  Added notes:
  If the operation monitor is connected to the built-in video card, the image may not be displayed correctly depending on the type of video card. In this case, update the driver of the built-in video card to the latest version.
  If the problem persists, connect the display for the operation monitor to an external video card.
  (For information on external video cards, refer to Graphics accelerator in the "System requirements" section of the instruction manual.)

Resolved Issues

• Corrected the message that may appear in case of WV-ASM300 double startup using the Windows startup function and desktop shortcut at a PC startup, from "It is impossible to start the operation software unless the setup software is closed." to "ASM300 has already started."

• WV-ASM300 restarts.
  Occurrence condition:
  Save the setting change on the [System]-> [Basic setup] when [Quick download Download time] is blank

  Note: [Quick download Download time] becomes blank after loading a setup file converted from WV-ASM200 on the WV-ASM300 version 1.00, 1.01, 1.02 or 1.03

• WV-ASM300 restarts and performs auto login without displaying login window at auto logout.
  Occurrence condition:
  When [Auto logout] is set to 1min / 5min / 10min / 15min / 30min / 60min (other than OFF) and one of the following cases occurs.

  Case1 - The search window does not finish searching by the auto logout time set in [Auto logout]

  Case2 - Auto logout occurs while operating cameras using WV-CU980 or CU950

• WV-ASM300 restarts and performs auto login without displaying login window at auto logout.
  Occurrence condition:
  When satisfying both of the following conditions:
  - [Auto logout] is set to 1min / 5min / 10min / 15min / 30min / 60min (other than OFF)
  - Auto logout occurs while WV-ASM300 is displaying the pop-up message that appear when "3D dewarp" is enabled

• WV-ASM300 incorrectly changes the displayed image when [Full screen display] is clicked, from the user selected image to the image previously displayed by clicking "Live" or Play" button of the alarm notification window.
  Occurrence condition:
  When satisfying both of the following conditions:
  - Version 5.10, 5.11, 5.12, or 5.13
  - New alarm notification window is displayed while WV-ASM300 is switching to full-screen display