Released versions:

...

• Corrected an issue where audio output did not work on the live window. 🇺 🇨
  Occurrence condition:
  - Network Address Port Translation (NAPT) is configured on the router

• Corrected the SNMP MIB response. 🇺🇨
  

  Anchor
  V2.60 V2.60

Version 2.60

...

Release date: Sept 28, 2023
->Updated on Oct 31: Added an item written in red
SDK version: V1.60

New Features / Improvements

...

• Corrected an issue where an mp4 video recorded on an SD memory card could not be played back on the camera. 🇨
  Occurrence condition: Record an mp4 video with [GOP control] set to "Advanced(Fixed GOP 60s w/1s key-frame)"

• Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion. 🇨
  Occurrence condition: Start sequence display on the recorder while performing SD memory card recording on the camera.

• Corrected an issue where the angle of view shifted after restarting the camera. 🇨
  Occurrence condition: Use digital zoom in to set the angle of view.

• Corrected an issue where the [Save trigger] setting of SD memory recording might unexpectedly changed after firmware update. 🇨

• Corrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting. 🇨

• Corrected an issue where MQTT notification worked only when [AI analytics target] is set to "Other" for audio detection. 🇨

• Corrected an issue where an unneccessary pop-up appeared. 🇨
  Occurrence condition: Set [Image capture size] to 3328x1872.

• Corrected an issue where multi-screen live view might not show images from other cameras. 🇨
  

  Anchor
  V2.36 V2.36

Version 2.36

...

• Changed the company name in the GlobalSign digital certificate installed on the camera to "i-PRO Co., Ltd." 🇺

• Supports the FTP function. 🇺 View details

• Added the HTML initialization function. 🇺 (Added on Nov.11, 2022)
  [Load the default HTML files (setup menu).] and [Reset to the default and load the default HTML files.] have been added to the [Default reset] tab.

• Changed the frame rate restriction when the extension software AI People Detection is installed on the camera as below. 🇺
  Previous versions : Restrict the maximum frame rate from 30fps to 15 fps when AI People Detection is installed on the camera.
  This version or later : Restrict the maximum frame rate from 30fps to 15fps after the communication starts with i-PRO Active Guard or i-PRO Configuration Tool.
  Note : The extension software AI People Detection needs to be updated to version 1.30 or later

...