Table of Contents

minLevel	1
maxLevel	2

Oct. 2023

Overview

Target products

Target products			Version
X series	Multi-directional + PTZ	X86530* / X86531*	2.40
S series	Multi-directional (3 or 4 sensors)	S8543* / S8544* / S8563L* / S8564L* / S8573L* / S8574L*	2.40
S series	Multi-directional (2 sensors)	S85402* / S85702*	2.40
U series	Multi-directional (2 sensors)	U85402*	2.40

Version up contents

Contents	X series	S series		U series
Contents	Multi-directional + PTZ	Multi-directional (3 or 4 sensors)	Multi-directional (2 sensors)	Multi-directional (2 sensors)
1. Improve frame rate when GOP control is set to Advanced	☑️	☑️
2. Support ON/OFF control by CGI for “Manual PTZ linkage” and “AI-VMD & PTZ linkage”	☑️
3. Improve schedule settings (Day/Night scene switching)	☑️		☑️	☑️
4. Add "Automatic backup" to "Save trigger" of SD recording	☑️		☑️	☑️
5. Add ext4 support to SD memory card file system format	☑️		☑️	☑️
6. Improve FTP/SFTP settings	☑️
7. Increase the range of “Alarm deactivation time”	☑️
8. Add "1280x720" resolution of 4MP model			☑️	☑️

☑️ : Version up target　✅ : Supported in previous versions

1. Improve frame rate when GOP control is set to Advanced

			Before	After
X series	X86530* / X86531*	Multi part	Max 7.5fps	Max 15fps
S series	S8573L* / S8574L*	4K model	Max 7.5fps	Max 15fps
	S8563L* / S8564L*	6MP model	Max 7.5fps	Max 15fps
	S8543* / S8544*	4MP model	Max 15fps	Max 30fps

2. Support ON/OFF control by CGI for “Manual PTZ linkage” and “AI-VMD & PTZ linkage”

Linkage can be controlled on/off using the CGI below.

Setting items

CGI

Parameter

Value

Manual PTZ linkage

cgi-bin/setdata

manual_cooperation

0 : Off

1 : On

Initial value : 1

AI-VMD & PTZ linkage

Info
This also applies to VMD alarms.

alarm_cooperation

0 : Off

1 : On

Initial value : 1

Command Example

http://192.168.0.10/cgi-bin/setdata?manual_cooperation=1&alarm_cooperation=0

How to check the settings

Check the response contents of the "cgi-bin/getdata" command.

manual_cooperation,"1"

alarm_cooperation,"0"

3. Improve schedule settings (Day/Night scene switching)

You can automatically switch to the scene file set in advance at the time of sunrise/sunset.

1. Schedule mode

Add "Auto-Schedule" to schedule mode. At sunrise, the image quality is set to "Scene file 1", and at sunset, the image quality is set to "Scene file 2".

2. Scene settings linked to sunrise and sunset times

Auto Scheduler (Manual/ City Selection)

: Select the input method for [Latitude], [Longitude], and [Altitude]. If you specify a city, [Latitude] [Longitude] [Altitude] are automatically entered.

Latitude / Longitude / Altitude

: Enter the value of the location where the camera is installed.

Automatic calculation result

: The sunrise/sunset times are calculated from [Latitude] [Longitude] [Altitude].

Sunrise time and sunset time correction

: Offset the sunrise and sunset times in [Automatic calculation result].

4. Add "Auto Backup" to "Save trigger" of SD recording

Support for interface of function that automatically backs up stream to SD card when the network is disconnected. When "Auto Backup" is set to "On" from VMS, "Auto Backup" is displayed in "Save trigger".

Info
Check your VMS manual for information on whether it supports this function.

5. Add ext4 support to SD memory card file system format

Some 3rd Party apps may require ext4 file system format.

Check your app's manual for more information.

Info
When “Ext. software mode” is On, "ext4" can be selected for the format of the SD memory card.

6. Improve FTP/SFTP settings

6-1. Add 2fps/3fps to "Transmission interval" of "Pre/Post alarm"

_{Note: Changes are underlined in the table below.}

Before	0.1fps / 0.2fps / 0.33fps / 0.5fps / 1fps
After	0.1fps / 0.2fps / 0.33fps / 0.5fps / 1fps / 2fps / 3fps

6-2. Add 1920x1080 to "support resolution" of "Pre alarm"

_{Note: Changes are underlined in the table below.}

Before	16:9	1280x720 / 640x360 / 320x180
Before	4:3	1280x960 / 800x600 / 640x480 / 400x300 / 320x240
After	16:9	1920x1080 / 1280x720 / 640x360 / 320x180
After	4:3	1280x960 / 800x600 / 640x480 / 400x300 / 320x240

6-3. Expand alarm image transmission settings

	Before	After
Number of alarm settings	1	2
Number of destinations	1	2

7. Increase the range of “Alarm deactivation time”

_{Note: Changes are underlined in the table below.}

Before	5 to 600 sec
After	0.5 sec or 1 to 600 sec

8. Add "1280x720" resolution of 4MP model

Support the following models.

WV-S85402*
WV-U85402*

_{Note: Changes are underlined in the table below.}

Before

After

Stream(1)

Stream(2)

Stream(1)

Stream(2)

Resolution

2688 x 1520

2560 x 1440

1920 x 1080

640 x 360

320 x 180

2688 x 1520

2560 x 1440

1920 x 1080

1280 x 720

1280 x 720 *1

640 x 360

320 x 180

Max fps

30 fps

Info
*1: If the stream(1) resolution is "2688 x 1520", the framerate will be limited to 15fps.

Apr. 2023

Overview

Target products

Target products			Version
S series	Fixed Box/Dome [2MP]	S1136 / S1536* / S2136* / S2236* / S2536*	2.33
	Fixed Box/Dome [5MP/6MP/4K]	S15500-F3L / S15500-F6L / S15500-V3L* / S15600-V2L* / S15700-V2L* S22500-F3L / S22500-F6L / S22500-V3L* / S22600-V2L* / S22700-V2L* S25500-F3L / S25500-F6L / S25500-V3L* / S25600-V2L* / S25700-V2L*	2.33
	360-degree fisheye	S4156 / S4176 / S4556* / S4576*	2.33
	PTZ	S61300-ZY* / S61301-Z1 / S61301-Z2 / S61302-Z4 / S61501-Z1 S65300-ZY* / S65301-Z1* / S65302-Z2* / S65340-Z2* / S65340-Z4* / S65501-Z1*	2.33
	mini	S71300-F3	2.33
	Multi-directional	S8543* / S8544* / S8563L* / S8564L* / S8573L* / S8574L*	2.33
U series	PTZ	U61300-ZY* / U61301-Z1 / U61301-Z2 U65300-ZY* / U65301-Z1* / U65302-Z2*	2.33

Version up contents

Contents	S series						U series
Contents	Fixed Box/Dome [2MP]	Fixed Box/Dome [5MP/6MP/4K]	360-degree fisheye	PTZ	mini	Multi-directional	PTZ
Add ext4 support to SD memory card file system format	☑️	☑️	☑️	☑️	☑️	☑️	☑️

☑️ : Version up target　✅ : Supported in previous versions

1. Add ext4 support to SD memory card file system format

Some 3rd Party apps may require ext4 file system format.

Check your app's manual for more information.

Info
When “Ext. software mode” is On, "ext4" can be selected for the format of the SD memory card.

Feb. 2023

Overview

Target products

Target products			Version
S series	Fixed Box/Dome [2MP]	S1136 / S1536* / S2136* / S2236* / S2536*	2.30
	Fixed Box/Dome [5MP/6MP/4K]	S15500-F3L / S15500-F6L / S15500-V3L* / S15600-V2L* / S15700-V2L* S22500-F3L / S22500-F6L / S22500-V3L* / S22600-V2L* / S22700-V2L* S25500-F3L / S25500-F6L / S25500-V3L* / S25600-V2L* / S25700-V2L*	2.30
	360-degree fisheye	S4156 / S4176 / S4556* / S4576*	2.30
	PTZ	S61301-Z2 / S61302-Z4 / S61501-Z1 S65340-Z2* / S65340-Z4* / S65501-Z1*	2.30
	mini	S71300-F3	2.30
	Multi-directional	S8543* / S8544* / S8563L* / S8564L* / S8573L* / S8574L*	2.30
U series	PTZ	U61300-ZY* / U61301-Z1 / U61301-Z2 U65300-ZY* / U65301-Z1* / U65302-Z2*	2.30

Version up contents

Contents	S series						U series
Contents	Fixed Box/Dome [2MP]	Fixed Box/Dome [5MP/6MP/4K]	360-degree fisheye	PTZ	mini	Multi-directional	PTZ
1. Improve schedule settings (Day/Night scene switching)	☑️	☑️	☑️	☑️	☑️	☑️	☑️
2. Add "Automatic backup" to "Save trigger" of SD recording	☑️	☑️	☑️	☑️	☑️	☑️	☑️
3. Improve FTP/SFTP settings	☑️	☑️	☑️	☑️	☑️		☑️
4. Increase the range of “Alarm deactivation time”	☑️	☑️	☑️	☑️	☑️		☑️
5. Add corridor mode to "Image capture mode"			☑️
6. Add "1280x720" resolution of 4MP model						☑️

☑️ : Version up target　✅ : Supported in previous versions

1. Improve schedule settings (Day/Night scene switching)

You can automatically switch to the scene file set in advance at the time of sunrise/sunset.

1. Schedule mode

Add "Auto-Schedule" to schedule mode. At sunrise, the image quality is set to "Scene file 1", and at sunset, the image quality is set to "Scene file 2".

2. Scene settings linked to sunrise and sunset times

Auto Scheduler (Manual/ City Selection)

: Select the input method for [Latitude], [Longitude], and [Altitude]. If you specify a city, [Latitude] [Longitude] [Altitude] are automatically entered.

Latitude / Longitude / Altitude

: Enter the value of the location where the camera is installed.

Automatic calculation result

: The sunrise/sunset times are calculated from [Latitude] [Longitude] [Altitude].

Sunrise time and sunset time correction

: Offset the sunrise and sunset times in [Automatic calculation result].

2. Add "Auto Backup" to "Save trigger" of SD recording

Support for interface of function that automatically backs up stream to SD card when the network is disconnected. When "Auto Backup" is set to "On" from VMS, "Auto Backup" is displayed in "Save trigger".

Info
Check your VMS manual for information on whether it supports this function.

3. Improve FTP/SFTP settings

3-1. Add 2fps/3fps to "Transmission interval" of "Pre/Post alarm"

_{Note: Changes are underlined in the table below.}

Before	0.1fps / 0.2fps / 0.33fps / 0.5fps / 1fps
After	0.1fps / 0.2fps / 0.33fps / 0.5fps / 1fps / 2fps / 3fps

3-2. Add 1920x1080 to "support resolution" of "Pre alarm"

_{Note: Changes are underlined in the table below.}

Before	16:9	1280x720 / 640x360 / 320x180
Before	4:3	1280x960 / 800x600 / 640x480 / 400x300 / 320x240
After	16:9	1920x1080 / 1280x720 / 640x360 / 320x180
After	4:3	1280x960 / 800x600 / 640x480 / 400x300 / 320x240

3-3. Expand alarm image transmission settings

	Before	After
Number of alarm settings	1	2
Number of destinations	1	2

4. Increase the range of “Alarm deactivation time”

_{Note: Changes are underlined in the table below.}

Before	5 to 600 sec
After	0.5 sec or 1 to 600 sec

5. Add corridor mode to "Image capture mode"

Corridor mode corrects the distortion of the upper and lower parts of the fisheye image and displays it on the left and right.

Add “Corridor” and “Fisheye + Corridor“ mode to "Image capture mode"

_{Note: Changes are underlined in the table below.}

Before

Fisheye / Double Panorama / Panorama / Quad PTZ / Single PTZ /

Fisheye + Double Panorama / Fisheye + Panorama / Fisheye + Quad PTZ /

Quad Stream

After

Fisheye / Double Panorama / Corridor / Panorama / Quad PTZ / Single PTZ /

Fisheye + Double Panorama / Fisheye + Corridor / Fisheye + Panorama / Fisheye + Quad PTZ /

Quad Stream

6. Add "1280x720" resolution of 4MP model

Support the following models.

WV-S8543*
WV-S8544*

_{Note: Changes are underlined in the table below.}

Before

After

Stream(1)

Stream(2)

Stream(1)

Stream(2)

Resolution

2688 x 1520

2560 x 1440

1920 x 1080

640 x 360

320 x 180

2688 x 1520

2560 x 1440

1920 x 1080

1280 x 720

1280 x 720 *1

640 x 360

320 x 180

Max fps

30 fps

Info
*1: If the stream(1) resolution is "2688 x 1520", the framerate will be limited to 15fps.

Sep. 2022

Overview

Target products

Target products			Version
S series	Fixed Box/Dome [2MP]	S1136 / S1536* / S2136* / S2236* / S2536*	2.20
	Fixed Box/Dome [5MP/6MP/4K]	S15500-F3L / S15500-F6L / S15500-V3L* / S15600-V2L* / S15700-V2L* S22500-F3L / S22500-F6L / S22500-V3L* / S22600-V2L* / S22700-V2L* S25500-F3L / S25500-F6L / S25500-V3L* / S25600-V2L* / S25700-V2L*	2.20
	360-degree fisheye	S4156 / S4176 / S4556* / S4576*	2.20
	PTZ	S61301-Z2 / S61302-Z4 / S65340-Z2* / S65340-Z4*	2.20
	mini	S71300-F3	2.20
U series	PTZ	U61300-ZY* / U61301-Z1 / U61301-Z2 U65300-ZY* / U65301-Z1* / U65302-Z2*	2.20

Version up contents

Contents	S series					U series
Contents	Fixed Box/Dome [2MP]	Fixed Box/Dome [5MP/6MP/4K]	360-degree fisheye	PTZ	mini	PTZ
1. Support FTP	Yes	Yes	Yes	Yes	Yes	Yes

1. Support FTP

How to configure

Added “Transmission protocol” menu.

You can choose FTP or SFTP (Default : SFTP)

FTP / SFTP support status

FTP Serve/Client function will be supported on below models.

		FTP		SFTP
		Server	Client	Server	Client
X series	Fixed Box/Dome [5MP/4K]	Done	Done	No	No
S series	Fixed Box/Dome [2MP]	Yes	Yes	No	Done
	Fixed Box/Dome [5MP/6MP/4K]	Yes	Yes	No	Done
	360-degree fisheye	Yes	Yes	No	Done
	PTZ	Yes	Yes	No	Done
	mini	Yes	Yes	No	Done
	Multi-directional	No	No	No	No
U series	Fixed Box/Dome	No	No	No	No
U series	PTZ	Yes	Yes	No	Done

Version	Old Version 51	New Version 52
Changes made by	Youichi Nakamura (中村陽一)	Youichi Nakamura (中村陽一)
Saved on	Oct 10, 2023	Oct 13, 2023

Content Comparison

Versions Compared

Key

Oct. 2023

Overview

Target products

Version up contents

1. Improve frame rate when GOP control is set to Advanced

2. Support ON/OFF control by CGI for “Manual PTZ linkage” and “AI-VMD & PTZ linkage”

Command Example

How to check the settings

3. Improve schedule settings (Day/Night scene switching)

4. Add "Auto Backup" to "Save trigger" of SD recording

5. Add ext4 support to SD memory card file system format

6. Improve FTP/SFTP settings

6-1. Add 2fps/3fps to "Transmission interval" of "Pre/Post alarm"

6-2. Add 1920x1080 to "support resolution" of "Pre alarm"

6-3. Expand alarm image transmission settings

7. Increase the range of “Alarm deactivation time”

8. Add "1280x720" resolution of 4MP model

Apr. 2023

Overview

Target products

Version up contents

1. Add ext4 support to SD memory card file system format

Feb. 2023

Overview

Target products

Version up contents

1. Improve schedule settings (Day/Night scene switching)

2. Add "Auto Backup" to "Save trigger" of SD recording

3. Improve FTP/SFTP settings

3-1. Add 2fps/3fps to "Transmission interval" of "Pre/Post alarm"

3-2. Add 1920x1080 to "support resolution" of "Pre alarm"

3-3. Expand alarm image transmission settings

4. Increase the range of “Alarm deactivation time”

5. Add corridor mode to "Image capture mode"

6. Add "1280x720" resolution of 4MP model

Sep. 2022

Overview

Target products

Version up contents

1. Support FTP

How to configure

FTP / SFTP support status