/
System Design Tool

System Design Tool

Owned by Akari Tomitaka (冨髙 安果莉)
Last updated: Dec 19, 2024
6 min read

Released versions:

Version 4.50

Release date: December 19, 2024

New Features / Improvements

  • Support 3D View Simulation. View detail

  • Improved the [Side View] so that the height, tilt angle and distance can be adjusted. View detail

  • Improved the Report fucntion as follows.
    - Added [Product Information] to the [Contents] tab. View detail
    - Optimized the calculation of [FOV Length]

  • Support new cameras* in [Recorder Calculation]-[NX series (NX400/NX300/NX200/NX100)].
    *The cameras supported in V4.40 of this tool.

  • Added ["Network Settings" Check] on/off checkbox to [List View]-[Advanced Setting] tab.

  • Improved the wall setting on the map, so that the start and end points of a wall can be connected.

Resolved Issues

  • Fixed a minor issue with the [Report]-[Preview] function.

Version 4.41

Release date: November 18, 2024

Resolved Issues

  • Corrected an issue where a camera/other item placed inside a wall or block could not be selected on the imported map.

  • Corrected an issue where the change in [Target Model] of [Report Settings] was not saved to the project.

  • Corrected an issue where placing a wall/block while a camera is selected resulted in both the camera and the wall/block being selected.

Version 4.40

Release date: October 28, 2024

New Features / Improvements

  • Supports new cameras.
    Indoor PTZ: WV-S61702-Z3, WV-S61602-Z3
    Aero PTZ: WV-X67700-Z3-3, WV-X67700-Z3L3, WV-X67710-Z3-3, WV-X67710-Z3L3, WV-X67300-Z4-3, WV-X67300-Z4L3, WV-X67310-Z4-3, WV-X67310-Z4L3, WV-X67311-Z4L3, WV-X67701-Z3L3, WV-X67711-Z3L3, WV-X67301-Z4L3
    High zoom bullet: WV-X15701-Z3L, WV-X15502-Z1L, WV-X15501-Z3L, WV-X15501-Z1L, WV-X15302-Z1L, WV-X15301-Z1L, WV-S15701-Z3L, WV-S15501-Z3L, WV-S15501-Z1L, WV-S15301-Z1L

  • Support memo function. View detail

    • A [Map Memo] button has been added to the map

    • A [Memo] field has been added to the Camera/Recorder/Others Properties field.

  • Improved the [List View] window by adding a [Summary] tab that shows the number of units by model. View detail

  • Support locating recorders and other devices* on the map. View detail
    *Selectable devices: WJ-PC200, WJ-PR204, WJ-PR201, WV-CU980, Switching hub, PoE hub, Monitor, PC, Others

  • Added [Network Settings] to the Account Settings window, the map, and device property fields, to support IP address input. View detail

  • Support displaying the number of pixels on the simulation image.

  • Support masking function to cover and hide unnecessary part of the map.

  • Changed the minimum installation height of 360-degree fisheye cameras while using AI app from 2.5m to 2m.

Version 4.33

Release date: August 28, 2024

Resolved Issues

  • Fixed an issue with [Report] function.

Version 4.32

Release date: July 30, 2024

Resolved Issues

  • Fixed an issue with [Report] function.

Version 4.31

Release date: July 23, 2024

New Features / Improvements

  • Improved the [Report] function as follows. View detail

    • Added Side View, Face, License Plate, People and PPM(F) checkboxes to the [Place of Installation] and [Camera Information] in the [Content] tab, to hide/show them on the report.

    • Added a [Match map size to paper size] checkbox to [Site Plan] in the [Content] tab.

    • Added a [Crop images to export to PPT] checkbox in the [Layout] tab.

    • Added a [Image Quality] tab in [Report Setting] to select the image quality of the report.

    • Added a [Product information(Web)] table that includes links to the product web page on the report.

    • Improved the [Report Setting] to save the latest setting.

  • Added [Map service] to the [Import Map] function so that online map service can be used for map. View detail

  • Improved scrolling performance on the map and menu.

Resolved Issues

  • Fixed minor issues.

Version 4.30

Release date: June 28, 2024

New Features / Improvements

  • Supports new cameras.
    Corner camera: WV-X25580-F2LN2

  • Improved the map display and [Display Options] setting as follows. View details
    - Changed camera icons on a map to use camera images.
    - Added [Camera shape size] setting to [Display camera shape] so that the size of camera icons can be selected from Large, Medium or Small.
    - Added [When shrink the map, the camera shape also shrinks] setting to enable resizing camera icons　according to the size of the map.

Resolved Issues

  • Fixed minor issues.

Version 4.20

Release date: March 29, 2024

Notice of changes in recommended browser:
From this version, Firefox and Safari are removed from the recommended browsers of this tool as below.
Please use with Google Chrome or Microsoft Edge as a browser.

New Features / Improvements

  • Adjusted the minimum object size of “Bicycle” for [Vehicle Counting].

Resolved Issues

  • Fixed an issue with [Recorder Calculation] to display an error message when unsupported compression (MJPEG) is selected for AI Privacy Guard camera.

Version 4.10

Release date: February 29, 2024

New Features / Improvements

  • Suppport recorder’s new versions. View details
    - Version 1.10 of WJ-NX510K(G), NX410K(G) and NX310K(G).
    - Version 1.30 of WJ-NU301, NU300, NU201 and NU101.
    - Version 5.40 of WJ-NX400, NX300, NX200 and NX100.

  • Improved the startup speed of opening a project.

  • Added the following message for announcement.
    Displayed message:
    Notice of changes to the End User License Agreement.
    From March 28, 2024, [Firefox] and [Safari] will be removed from the recommended browsers listed in "Operation Environment".

Resolved Issues

  • Fixed minor issues with [Recorder Calculation].

Version 4.01

Release date: February 5, 2024

Resolved Issues

  • Corrected an issue where [Save project] failed and returned “System Error(500)”.
    Occurrence condition:
    When the map contains an old model such as WV-SCxxx, WV-SWxxx and WV-SF(N)xxx.
    *“xxx” stands for 3-digit model number.

Version 4.00

Release date: December 26, 2023

New Features / Improvements

  • Supports new cameras.
    - X series dome/bullet: WV-X15700-V2LN, WV-X15600-V2LN, WV-X15500-V3LN​​, WV-X15300-V3LN, WV-X15700-V2L, WV-X15600-V2L, WV-X15500-V3L​, WV-X15300-V3L, WV-X25700-V2LN, WV-X25600-V2LN, WV-X25500-V3LN​, WV-X25300-V3LN, WV-X22700-V2L, WV-X22600-V2L, WV-X22500-V3L​, WV-X22300-V3L
    - Compact dome: WV-X35402-F2LM, WV-X35402-F2L, WV-S35402-F2L, WV-S35402-F2LG, WV-S35402-F2L1, WV-S32402-F2L, WV-S32402-F2LG, WV-S32402-F2L1, WV-U35401-F2L, WV-U35401-F2LG, WV-U35301-F2L, WV-U35301-F2LG, WV-U31401-F2L, WV-U31401-F2LG, WV-U31301-F2L, WV-U31301-F2LG

Version 3.91

Release date: December 1, 2023

Resolved Issues

  • Fixed minor issues.

Version 3.90

Release date: November 17, 2023

New Features / Improvements

  • Supports [Recorder Calculation] for WJ-NX310K(G), WJ-NX410K(G) and WJ-NX510K(G). View details

  • Improved [Recorder Calculation] when a camera not supported by the recorder is included in the map.
    You can exclude the unsupported camera by unchecking the [Target] checkbox, to continue the calculation. View details

Resolved Issues

  • Fixed a minor issue.

Version 3.80

Release date: September 5, 2023

New Features / Improvements

  • Supports new cameras.
    - Rapid PTZ: WV-S66700-Z3, WV-S66700-Z3L, WV-S66600-Z3, WV-S66600-Z3L, WV-S66300-Z3, WV-S66300-Z3L, WV-S66300-Z4, WV-S66300-Z4L, WV-X66700-Z3S, WV-X66700-Z3LS, WV-X66600-Z3S, WV-X66600-Z3LS, WV-X66300-Z3S, WV-X66300-Z3LS, WV-X66300-Z4S, WV-X66300-Z4LS
    - Compact dome: WV-S32302-F2L, WV-S32302-F2LG, WV-S32302-F2L1, WV-S35302-F2L, WV-S35302-F2LG, WV-S35302-F2L1, WV-X35302-F2L, WV-X35302-F2LM

  • Improved the [Camera properties] to no longer display an unnecessary message “The Tilt Angle field must be between 36.38 and 90.” when “Far” is set for Multi-directional + PTZ cameras.

  • Supports [PoE Budget Calculation] for NU series recorders. View details

Version 3.70

Release date: June 14, 2023

New Features / Improvements

  • Supports new cameras.
    - WV-U11300-V2 / U21300-V2L
    - WV-S1136A / S1536LA / S1536LA-B / S1536LNA / S1536LNA-B / S1536LNSA / S1536LTA / S1536LTNA / S2136A / S2136A-B / S2136GA / S2136GA-B / S2136LA / S2136LA-B / S2136LGA / S2136LGA-B / S2236LA / S2236LA-B / S2236LGA / S2236LGA-B / S2536LA / S2536LGA / S2536LGNA / S2536LNA / S2536LTA / S2536LTNA / S4156A / S4176A / S4556LA / S4556LMA / S4576LA / S4576LMA / S71300A-F3

Version 3.60

Release date: Marh 31, 2023

New Features / Improvements

  • Supports exporting and importing [Registered projects] data. View details

  • Added [Display numbers for walls and blocks] and [Display lines for walls and blocks] checkboxes in [Display Options]. View details

  • Supports importing multiple PDF pages as maps on [Import Map]. View details

Version 3.50

Release date: February 28, 2023

New Features / Improvements

  • Supports new cameras.
    - WV-X86530-Z2 / WV-X86531-Z2 View details #1
    - WV-S85402-V2L / WV-S85702-F3L / WV-U85402-V2L View details #2

  • Changed the order of cameras listed on the [Camera Properties]-> [Camera Select].

  • Supports “Perpendicular Angle Mode” for [People Counting] of multi-directional cameras. View details #5

  • Supports new recorders: WJ-NU101, NU201, NU300 and NU301. View details #4

  • Supports version 5.20 of WJ-NX100, NX200, NX300 and NX400.
    - [Recorder Calculation] newly supports the following cameras: WV-S61300, S61501, S65300, S65301, S65302 and S65501

  • Added the following message that appears when 360-degree fisheye camera is placed on a map.
    Displayed message: PPM figures and simulation images are reference values. Accurate simulation may not be possible depending on the characteristics of the lens.

  • Changed the upper limit of frame rate while using AI Privacy Guard in WV-S71300-F3 from 10fps to 15fps.

Version 3.42

Release date: November 18, 2022

Resolved Issues

  • Fixed minor issues.

Version 3.41

Release date: October 31, 2022

Resolved Issues

  • Fixed minor issues in export report function.

Version 3.40

Release date: October 28, 2022

New Features / Improvements

  • Supports [Report] feature to export report in PDF/PPT format.

  • Supports displaying camera name on a map.

  • Improved the field of view accuracy of [People Counting].