/
Can PTZ camera display directions such as north?
Can PTZ camera display directions such as north?
- Ai Mizoguchi (溝口 愛)
- Etsumi Kanaya (金谷 悦己) (Unlicensed)
- Kiyonori Harada (原田 清憲)
Owned by Ai Mizoguchi (溝口 愛), created
Answer
PTZ cameras can be determined the direction of the north manually by configuring "North point setting".
When "North point setting" is configured, one of 8 directions such as the north ("N") is able to be displayed on the screen during PTZ operation (Ex. Northeast: "NE").
The setting procedure is available for the section "Configure the settings relating to direction or direction/angle setting" in the Operating Instructions of each PTZ camera.
, multiple selections available,
Related content
Does VMD alarm occur during PTZ operation?
Does VMD alarm occur during PTZ operation?
Read with this
How can I set up Multi-directional+PTZ camera with Genetec Security Center?
How can I set up Multi-directional+PTZ camera with Genetec Security Center?
More like this
What to do If the preset position of PTZ camera became inaccurate?
What to do If the preset position of PTZ camera became inaccurate?
Read with this
Is there an area where no image is displayed in Quad PTZ or Quad stream mode?
Is there an area where no image is displayed in Quad PTZ or Quad stream mode?
More like this
Why SD recording image is overwritten even though the capacity is not full?
Why SD recording image is overwritten even though the capacity is not full?
Read with this
During manual SD recording, will recording resume after reboot?
During manual SD recording, will recording resume after reboot?
Read with this