Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Answer

Adjust the following settings to reduce image blur.

  1. Adjust stream settings on [Image] window
    - Increase the value of [Max bit rate (per client)]
    e.g. from 3M to 6M or 8M
    - Increase [Image quality]
    e.g. from 5M to 3 in case of VBR

    When the image still remains blurry, change the following setting on the [Image quality] window.

  2. Adjust [DNR]
    e.g. from 128 to 112

    When sharpness is still insufficient, set the following on [Image quality] window.

  3. Increase Sharpness level/Aperture level.
    e.g. from 16 to 21 (Sharpness increases. but noise also increases).

  • No labels