Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Table of contents


Introduction


This explanation assumes that the i-PRO camera application development environment has been completed.
If you are not ready to build the development environment, please refer to here to complete it.

Also, in this tutorial, the SDK installation directory is described as ${SDK_DIR}.

Operation overview


audio_app is a sample application that acquires audio at regular intervals and outputs logs.

External libraries required for operation


No special mention.

Directory path of the sample app


The C/C++ source code is stored below.

${SDK_DIR}/src/adamapp/audio_app

The Python source code is stored below.

${SDK_DIR}/src/adamapp-py/audio_app

How to build the sample app (C/C++)


Load the build environment settings file in the SDK installation directory.

$ cd ${SDK_DIR}
$ source setup_env.sh ipro-ambaCV2X

Set the build environment according to each environment.
Here, specify ipro-ambaCV2X.

make.

$ cd src/adamapp/audio_app
$ make

It is successful if the .ext file is created in ${SDK_DIR}/src/adamapp/audio_app.

 

Install it on the camera (eg, you can install from the green frame in the image below). Select the created .ext file and install it.
Open the app screen (red frame button in the image below).

 

It is successful if the characters like the image below are displayed.

How to build the sample app (Python)


Load the build environment settings file in the SDK installation directory.

$ cd ${SDK_DIR}
$ source setup_env.sh ipro-ambaCV2X

Set the build environment according to each environment.
Here, specify ipro-ambaCV2X.

 

make.

$ cd src/adamapp-py/audio_app
$ make

It is successful if the .ext file is created in ${SDK_DIR}/src/adamapp-py/audio_app.

 

Install it on the camera (eg, you can install from the green frame in the image below). Select the created .ext file and install it.
Open the app screen (red frame button in the image below).

 

It is successful if the characters like the image below are displayed.

How to use the sample app


Acquires audio at regular intervals and outputs logs. As shown in the red line below, you can check that the log is output when the voice is acquired.

  • No labels