Preparation

Please refer here for the environment construction procedure.

Convert sample models

mobilenetv2

Move directory.

$ cd /home/cvtool/conversion/onnx/mobilenetv2

Convert the model.

$ ./onnx_conversion.sh setting.conf

yolov5 / yolov8

Download sample model.

(yolov5)
$ cd /home/cvtool/conversion/onnx/yolov5
$ ./setup_yolov5.sh

(yolov8)
$ cd /home/cvtool/conversion/onnx/yolov8
$ ./setup_yolov8.sh

Convert the model.

$ ./onnx_conversion.sh setting.conf

The model after conversion is output to the following directory.

• For ambaCV2X camera

${OUTPUT_DIR}/${NET_NAME}/${PARSER_OPTION}/[model name]

• For ambaCV5X camera

${OUTPUT_DIR}/${NET_NAME}_ambaCV5X/${PARSER_OPTION}/[model name]

Conversion

1. Copy either directory under /home/cvtool/conversion/onnx.

$ cd /home/cvtool/conversion/onnx
$ cp -r mobilenetv2 foo
$ cd foo

2. Change the parameter of "setting.conf" according to the model to be converted.
   

3. Convert the model.

$ ./onnx_conversion.sh setting.conf

setting.conf

# Network Name
NET_NAME=mobilenet_v2

# Path to Directory for ONNX Models
MODEL_DIR=./sample/mobilenet_v2/models

# Path to Directory for DRA Images
DRA_IMAGE_DIR=../../dra_img

# Path to Directory for Output Data
OUTPUT_DIR=./out

# Quantization Mode
#  FIX8  : Fixed-point  8bit
#  FIX16 : Fixed-point 16bit
#  MIX   : FIX8/FIX16 mixed
PARSER_OPTION=MIX

# Input Data Format (0:NHWC, 1:NCHW)
IN_DATA_FORMAT=1

# Input Data Channel
IN_DATA_CHANNEL=3

# Input Data Width
IN_DATA_WIDTH=224

# Input Data Height
IN_DATA_HEIGHT=224

# Input Data Mean Vector
IN_MEAN=103.94,116.78,123.68

# Input Data Scale
# IN_SCALE=1/Scale
IN_SCALE=58.823529411

# RGB or BGR (0:RGB, 1:BGR)
IS_BGR=1

# Output Layers Name
OUT_LAYER=mobilenetv20_output_flatten0_reshape0

# Unique preprocess
# if use im2bin -> NONE
# if use unique preprocess -> script path
PREPRO=NONE
PREPRO_ARG=""

# Input file data format
IN_DATA_FILEFORMAT=0,0,0,0

# Transpose indices(NONE:without transpose , 0,3,1,2:transpose (EX))
IN_DATA_TRANSPOSE=NONE

• NET_NAME: The name of network

  • Any name can be set.

• MODEL_DIR: Path to directory which includes .onnx files

  • All .onnx files under the directory are converted.

• IMAGE_DIR: Path to directory which includes image files for optimizing quantization

  • Please put the directory image files for training. Recommended number of image files is 100 to 200.

  • Image file format should be the format that are supported by OpenCV (Ex. JPEG, PNG and etc…).

  • Any resolution is supported.

• OUTPUT_DIR: Path to directory which converted data in placed.

• PARSER_OPTION: Quantization mode

  • Select from FIX8/FIX16/MIX (FIX8/FIX16 mixed).

• IN_DATA_CHANNEL: Number of input image channel for target model

• N_DATA_WIDTH: Width of input image for target model

• IN_DATA_HEIGHT: Height of input image for target model

• IN_MEAN: Normalization parameter (mean) of input image

  • Please refrain from using space between “,” as shown below if using numerical value.
    IN_MEAN=127.5,127.5,127.5

• IN_SCALE: Normalization parameter (scale) of input image

  • Please refrain from using space between “,” and only use “,” to separate values when setting different values for each channel.

• IS_BGR: Format of input image (RGB or BGR)

• OUT_LAYER: The name of output layer for target network

  • If two or more layers exists, separate layers by “,”.

  • When the following symbols are contained in the name of input/output node, conversion may not be successful.
    : | ; , ‘

• PRIORBOX_NODE: Node equivalent to “priorbox”

  • Need to set when IS_SSD=1

• PREPRO: Path of preprocessing script (python script)

  • Refer to “/home/cvtool/ common/prepro.py” for how to create a script

• PREPRO_ARG: Argument of preprocessing script (python script)

• IN_DATA_FILEFORMAT: Input data format

  • Examples : uint8->0,0,0,0, float32->1,2,0,7, float16->1,1,0,4

  • When the value of IN_DATA_FILEFORMAT changes from “0,0,0,0”, setting PREPRO is needed.

• IN_DATA_TRANSPOSE: Specify when performing TRANSPOSE on the input data

If conversion error occurs

Modifying the model by graph_surgery.py included in cvtool may resolve the problem.
Please refer here for details about graph_surgery.py.

• The model includes unsupported node by cvtool
  Run the following command.

  $ graph_surgery.py onnx -m (model name before modification) -o (model name after modification) -t CVFlow

  Please refer here for the list of supported node.
  
  You can check if the model includes unsupported node, by using onnx_print_graph_summary.py in cvtool.

  $ onnx_print_graph_summary.py -p (model name)

• Input of the model has variable value

  

  Replace with fixed value by the following command.

  $ graph_surgery.py onnx -m (model name before modification) -o (model name after modification) -isrc "i:input|is:1,3,960,960" -t SetIOShapes

• Input shape of the model is NHWC, and transposed to NCHW first

  

  Separate from the beginning of the model to “Tranpose” node.
  

  $ graph_surgery.py onnx -m (model name before modification) -o (model name after modification) -isrc "i:(output name of Transpose node)|is:1,3,224,224" -t CutGraph

• Unsupported character ( : |　;　,　‘ ) is included in OUT_LAYER
  Rename the node by the following command.

  $ graph_surgery.py onnx -m (model name before modification) -o (model name after modification) -t "RenameTensors(original_name=new_name)"

  If multiple nodes are specified, please separate those by ",".

  -t "RenameTensors(node::1=node1,node::2=node2)"