Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Table of contents

Preparation

Please refer here for the environment construction procedure.

Conversion

Convert the model.

Please change the parameter "setting.conf" of the argument according to the model to be converted.

$ cd /home/cvtool/conversion/caffe
$ ./caffe_conversion.sh setting.conf

The model after conversion is output to the following directory.

${OUTPUT_DIR}/${NET_NAME}/${PARSER_OPTION}/[model name]

Setting.conf

# Network Name
NET_NAME=mobilenetv1

# Path to Deploy Prototxt
DEPLOY_PROTOTXT=./sample/mobilenet_v1/mobilenet_deploy.prototxt

# Path to Directory for (Deploy) Caffe Models
MODEL_DIR=./sample/mobilenet_v1/models

# Path to Directory for DRA Images
DRA_IMAGE_DIR=../dra_img

# Path to Directory for Output Data
OUTPUT_DIR=./out

# Quantization Mode
#  FIX8  : Fixed-point  8bit
#  FIX16 : Fixed-point 16bit
#  MIX   : FIX8/FIX16 mixed
PARSER_OPTION=FIX8

# Input Data Format (0:NHWC, 1:NCHW)
IN_DATA_FORMAT=1

# Input Data Channel
IN_DATA_CHANNEL=3

# Input Data Width
IN_DATA_WIDTH=224

# Input Data Height
IN_DATA_HEIGHT=224

# Input Data Mean Vector or Name of .binaryproto
IN_MEAN=103.94,116.78,123.68

# Input Data Scale
# IN_SCALE=1/Scale
IN_SCALE=58.823529411

# RGB or BGR (0:RGB, 1:BGR)
IS_BGR=1

# Input Layer Name
IN_LAYER=data

# Output Layers Name
OUT_LAYER=mbox_loc,mbox_conf_flatten

#cavalry version
#if not specified -> ""
CAVALRY_VER="2.1.7"

# Unique preprocess
# if use im2bin -> NONE
# if use unique preprocess -> script path
PREPRO=NONE
PREPRO_ARG=""

# Input file data format
IN_DATA_FILEFORMAT=0,0,0,0

# Transpose indices(NONE:without transpose , 0,3,1,2:transpose (EX))
IN_DATA_TRANSPOSE=NONE

  • NET_NAME: The name of network.

    • Any name can be set.

  • DEPLOY_PROTOTXT: Path to deploy prototxt file

  • MODEL_DIR: Path to directory which includes caffemodel

    • All caffemodels under the converted directory

  • DRA_IMAGE_DIR: Path to directory which includes image files for optimizing quantization

    • Please put the directory image files for training. Recommended number of image files is 100 to 200.

    • Image file format should be the format that are supported by OpenCV (Ex. JPEG, PNG and etc…).

    • Any resolution is supported.

  • OUTPUT_DIR: Path to directory to which the converted data is placed

  • PARSER_OPTION: Quantization mode

    • Select from FIX8/FIX16/MIX (FIX8/FIX16 mixed).

  • IN_DATA_CHANNEL: Number of input image channel for target model

  • N_DATA_WIDTH: Width of input image for target model

  • IN_DATA_HEIGHT: Height of input image for target model

  • IN_MEAN: Normalization parameter (mean) of input image

    • It can be set by numerical value or .binaryproto file

    • Please refrain from using space between “,” as shown below if using numerical value.
      IN_MEAN=127.5,127.5,127.5

    • Please set a path to the file as shown below when setting by .binaryproto file.
      IN_MEAN=./model/mean.binaryproto

  • IN_SCALE: Normalization parameter (scale) of input image

    • Please refrain from using space between “,” and only use “,” to separate values when setting different values for each channel.

  • IS_BGR: Format of input image (RGB or BGR)

  • IN_LAYER: The name of input layer for target network

    • In the converted model, the name of input layer changes to “${IN_LAYER}_0” .
      Therefore, “_0” needs to be added to the name of input layer, when the converted model executes AdamApp.

    • When the following symbols are contained in the name of input layer, conversion may not be successful.

      • | ; , ‘

  • OUT_LAYER: The name of output layer for target network

    • If two or more layers exists, separate layers by “,”.

    • When the following symbols are contained in the name of output layer, conversion may not be successful.

      • | ; , ‘

  • CAVALRY_VER: Version of cavalry to use

  • PREPRO: Path of preprocessing script (python script)

    • Refer to “/home/cvtool/ common/prepro.py” for how to create a script.

  • PREPRO_ARG: Argument of preprocessing script (python script)

  • IN_DATA_FILEFORMAT: Input data format

    • examples: uint8->0,0,0,0, float32->1,2,0,7, float16->1,1,0,4)

    • When the value of IN_DATA_FILEFORMAT changes from “0,0,0,0”, setting PREPRO is needed.

  • N_DATA_TRANSPOSE: Specify when performing TRANSPOSE on the input data

If input layer is not defined in deployed prototxt file, add the layer as shown below.

Convert sample model

Download sample model.

$ wget https://github.com/shicai/MobileNet-Caffe/blob/master/mobilenet.caffemodel
$ mv mobilenet.caffemodel sample/mobilenet_v1/models

Conver the model.

$ ./caffe_conversion.sh setting.conf

  • No labels