Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 14 Next »

Released versions:

Priority Rank Level

🇦 : Recommended to apply
🇧 : When issue happened
🇨 : Maintenance timing
🇺 : Function / performance improvement

Version 2.33

Release date: March 31, 2023
SDK version: V1.60

New Features / Improvements

  • Supports ext4 for SD memory card format. 🇺 View details
    [SD Memory Card File System Format] setting has been added to the [SD memory card] page.

  • Improved the ONVIF connection. 🇺

Resolved Issues

  • Corrected an issue where the camera might reboot. 🇨
    Occurrence conditions:
    - The extension software AI-VMD and AI Privacy Guard are installed and enabled on the camera.
    - The camera is connected to a recorder and “SD backup rec.” is enabled on the recorder’s setting.

  • Corrected an issue where the camera might be slow to start up. 🇨
    Occurrence condition: Multicast auto start is enabled by CGI command.

Version 2.30

Release date: February 27, 2023
SDK version: V1.60

New Features / Improvements

  • Supports new CGI commands. 🇺

  • Supports day and night scene switching on the [Schedule] setting. 🇺 View details #1
    "<Auto-Schedule>Daytime: Image Quality 1/ Night: Image Quality 2" has been added to the [Schedule mode] options.
    *[Scene settings linked to sunrise and sunset times] need to be configured to use this function.

  • Added the On/Off setting to the [SNMP agent setting] in [Network]->[Advanced]->[SNMP]. 🇺
    *Default=On

  • Supports a CGI command to start SD recording when an image transmission stops. 🇺 View details #2

  • Supports editing the camera title on the live window. An edit icon appears next to the camera title. 🇺
    Note: Available for administrator only.

  • Supports a command to send HTTP port number to a 3rd party application. 🇺

  • Changed the default DHCP host name from COM MID1 to i-PRO-<MAC address of camera>. 🇺

  • Improved the FTP/SFTP settings as follows 🇺 View details #3
    - Added 2fps and 3fps to the [Transmission interval] options of [Pre alarm] and [Post alarm]
    - Increased the number of SFTP server setting from 1 to2
    - Added "1920x1080" to the [Image capture size] options of [Pre alarm]

  • Added 0.5s, 1s, 2s, 3s, and 4s to the [Alarm deactivation time] options. 🇺 View details #4

  • Supports replacing %25 with % in the destination address of HTTP alarm notification. 🇺

  • Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode". 🇺

  • Improved [Audio detection] setting so that [AI analytics target] options (Gunshot/ Yell/ Vehicle Horn/ Glass Break) are enabled by default, when [Audio detection] is set to "On". 🇺

  • Improved the frame rate during the slow shutter operation under low illuminance condition. 🇺

  • Improved the image quality as follows 🇺
    Image contrast / Auto focus performance during pan-tilt operation / Image brightness during stabilizer operation

  • Improved the detection accuracy of people detection for extension software. 🇺

  • Supports the extension software AI Scene Change Detection free of charge. 🇺

  • Changed the text color on the log list for the visibility improvement. 🇺

  • Improved the ONVIF connection. 🇺

Resolved Issues

  • Corrected an issue where the mic input volume from the camera became higher than the selected value. 🇨
    Occurrence condition: Change the [Mic input volume] on the live window.

  • Corrected an issue where the [Mic input volume] setting displayed "Line High/ Line Middle/ Line Low" as options on the live window, even for the camera without line input. 🇨

  • Corrected an issue where it was not possible to reinstall an extension software application after uninstalling it. 🇨
    Occurrence condition: The power of camera is turned off while uninstalling the extension software application.

  • Corrected an issue where the camera could not connect to a recorder and VMS on rare occasion. 🇨
    Occurrence condition: TLS1.3 is selected for [HTTPS-Connection].

  • Corrected an issue where H.265/H.264 live image might not appear. 🇨
    Occurrence condition:
    - Version 2.20 or later
    - Network Address Port Translation (NAPT) is configured on the router

Version 2.23

Release date: December 13, 2022
SDK version: V1.60

Resolved Issues

  • The angle of view returns to the default center position. 🇧
    Occurrence condition:
    When satisfying both of the following conditions:
    - Version 2.20
    - The camera was restarted after adjusting the angle of view using the Extra optical zoom

  • SFTP transmission fails depending on the SFTP server to be connected. 🇨

  • The live image may not appear, as the maximum number of users concurrently accessible to the camera decreases. 🇧
    Occurrence condition:
    When satisfying all of the following conditions:
    - Version 2.20
    - [Internet mode] is set to Off by CGI command
    - H.264/H.265 transmission

  • Unable to set privacy zone from i-PRO Configuration Tool (iCT). 🇨

Version 2.20

Release date: October 3, 2022
SDK version: V1.60

New Features / Improvements

  • Changed the company name in the GlobalSign digital certificate installed on the camera to "i-PRO Co., Ltd." 🇺

  • Supports the FTP function. 🇺 View details

  • Added the HTML initialization function. 🇺 (Added on Nov.11, 2022)
    [Load the default HTML files (setup menu).] and [Reset to the default and load the default HTML files.] have been added to the [Default reset] tab.

Resolved Issues

  • The occupancy detection area information is not included in the HTTP alarm notification from the camera. 🇨

  • The frame rate and bit rate may not recover once they drop due to the environmental cause. ??

Version 1.10

Release date: June 1, 2022

  • First mass-production

  • No labels