Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of contents

...

Table of Contents
minLevel1
maxLevel4

Preparation for establishing the SDK development environment

...

Settings for downloading and installing software

Set up a package management system ‘apt’ in Ubuntu in order to download and install software tools.

...

Code Block
$ sudo apt-get update

Installing tools for host machine

Install tools for the host machine including a toolchain such as compiler, linker or assembler along with the libraries etc. Use apt-get command for the installation.

...

Code Block
$ sudo apt-get install multiarch-support

About i-pro camera SoC

The i-pro camera uses SoC provided by ambarella. Hereafter, ambarella's CV2X (generic term for chip types such as CV2, CV22, CV25, etc.) SoC will be abbreviated as ambaCV2X. There are SoCs such as CV52 with higher performance, in which case it is called ambaCV5X. Please see below for compatibility between the camera and the SoC used.
Installation conditions for applications - Technology Partner FAQ (En) - Confluence (atlassian.net)

Installing modules in accordance with each target

Install Ambarella_Toolchain_Linaro_2018.08 included in AdamAppSDK_DevTools_YYYYMMDD.zip(get here) as a cross compiler to build AdamApps for i-pro ambaCV2X models.

...

Info

If you are prompted for TOOLCHAIN PATH[/usr/local]: when you run ./ubuntuToolChain-201808, just press enter without typing anything. After that, the installation path will be automatically generated, so enter the Y key.

Installing Google Chrome Browser

Install Google Chrome Browser from the URL below. The location to install Chrome can be either on Windows or on Ubuntu in VirtualBox.

Google Chrome browser :

http://www.google.com/chrome/

Installing Adam Operation UI in Chrome

Install the Adam Operation UI extension for Google Chrome.

...

Info

If an Auth error is displayed when connecting to the ADAM OPERATION UI, please check the FAQ below.
ADAM OPERATION UI Shows Auth Error - Technology Partner FAQ (En) - Confluence (atlassian.net)

Installing Resource Monitor Extension in Chrome

Install Resource Monitor Extension for Google Chrome. The installation procedure is the same as Adam Operation UI Extension.

Open /tool folder using file manager, then drag and drop “ResourceMonitorExtension” folder on Extensions page.

...

Please refer to here for the instruction of Resource Monitor.

How to install AdamAppSDK

Installing AdamAppSDK

Unzip iPRO_CAMERA_SDK_Vx_xx.zip(get here) in any directory on your Development PC as indicated below. (iPRO_CAMERA_SDK file name’s Vx_xx is a value of the AdamAppSDK version).

Code Block
$ cd <The directory in which a developer is going to install AdamAppSDK>
$ unzip iPRO_CAMERA_SDK_Vx_xx.zip 
$ ls –CF 
iPRO_CAMERA_SDK_Vx_xx/
Note

Be sure to copy the SDK zip file into Ubuntu before extracting the zip file. If you extract it on another OS such as Windows and then move it to Ubuntu, it will not work properly.

The installation is completed.

Note

In the environment on VirtualBox, creation of symbolic links and compilation may fail on shared directories. Install it in a directory on Ubuntu.

Getting the Development License

In principle, only encrypted AdamApp can be installed into i-PRO cameras sold in general. A development license is embedded in SDK so that AdamApp that has not been encrypted can be installed into i-PRO camera with specified MAC address. Please obtain a development license file from i-PRO Co., Ltd. then save the file as shown below.

<AdamAppSDK’s Installation Directry>/conf/development.key

Build the sample app

Build the sample application "additional_info_sample_app" and install it on the camera. If sample application works, the construction of the SDK development environment is completed.

Only the minimum necessary steps are described. Please see here for details on how to develop.

Generate and place source files

Source files of the AdamApp must be placed in the following directory.

...

Info

By copying the skeleton_sample_app directory and creating a new directory, the set of files necessary to create a new AdamApp will also be copied. It’s recommended that you copy and modify skeleton_sample_app directory to generate new application for ease.
*For Python, we recommend using the jpeg_app directory.

Build the sample app

setup_env.sh is provided as a setup file for the building environment. You can set up building
environment by reading setup_env.sh using ‘source’ command with parameter depending on execution
environment of AdamApp.

...

Code Block
$ cd <directory of installed AdamAppSDK>
$ source setup_env.sh ipro-ambaCV2X
***** /usr/local/linaro-aarch64-2018.08-gcc8.2/bin/aarch64-linux-gnu-gcc found. *****
PF_BASEDIR = /home/user/adamappsdk
BUILD_TARGET = ipro-ambaCV2X
TARGET_FOR_ADAM = ambaCV2X
TARGET_ARCH = aarch64-linux-gnu
VERBOSE = 0
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games

Execute make (build and generate package of AdamApp)

You will need to execute make to build and generate an AdamApp package. AdamApp package will be build and generated automatically. When it is successful, the following three files are generated within skelton_sample_app directory.
AdditionalInfoSampleApp : The execution program of additional_info_sample_app
AdditionalInfoSampleApp.zip :The package of additional_info_sample_app
AdditionalInfoSampleApp.ext :Encoded file by BASE64

...

Info

The following error may occur during make.
make: execvp: <AdamAppSDK installation directory>/tool/adamapp_configurator: Permission denied

In that case, please set the permissions of adamapp_configurator as shown below and make again.
cd <AdamAppSDK installation directory>/tool
sudo chmod +x adamapp_configurator

Operation check of the sample application

Install the created "AdditionalInfoSampleApp.ext" to the camera and check the operation.

...