...
Click here for the version from V1.30 to V2.21
...
🇦 : Recommended to apply |
| Anchor | ||||
|---|---|---|---|---|
|
Version 2.70
Release date: October 22, 2024
Resolved Issues
Fixed the following issue including other minor issue:
Corrected an issue where the frame rate might drop. 🇨
Occurrence condition:
- [Stream encoding format] is H.264
- [Frame rate] is set to 5fpsAnchor V2.62 V2.62
Version 2.62
Release date: July 10, 2024
Resolved Issues
Corrected an issue where the live image might not appear on the [VMD area] and [Image quality] setting windows. 🇨
Occurrence conditions: Version 2.50, 2.60 and 2.61Anchor V2.61 V2.61
Version 2.61
Release date: June 25, 2024
Resolved Issues
Corrected an issue where the camera might transmit a lower frame rate image than setting. 🇨
Occurrence conditions:
- [Frame rate] is set to 5fps or 3fps
- [Stream encoding format] is H.264
- [Image capture size] is 640x360, 320x180, VGA or QVGAAnchor V2.60 V2.60
...
Changed the font on the browser as below:
The font of on-screen display (OSD) to Iwata UD 🇺
Resolved Issues
Corrected an issue where some 3rd party applications might not work with version 2.50. 🇨
Corrected an issue where the camera might reboot when [Maximum shutter] is set to "Max.4/30s" on rare occasion. 🇨
Anchor V2.50 V2.50
...
Added an improvement to enhance security. 🇺
Added improvements to the live and setting windows on the web browser. 🇺
Improved the response to CGI command. 🇺
Improved the ONVIF connection. 🇺
Resolved Issues
Fixed minor issues. 🇨
Anchor V2.40 V2.40
...
Improved the performance while updating or installing extension software to avoid failure in a slow network. 🇺
Improved the response to the following CGI commands. 🇺
/cgi-bin/getdata
/cgi-bin/get_capability
Improved the performance while downloading a video data from an SD memory card in an unstable network. 🇺
Resolved Issues
Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion. 🇨
Occurrence conditions: Start sequence display on the recorder while performing SD memory card recording on the camera.Corrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting. 🇨
Anchor V2.26 V2.26
...
Supports new CGI commands. 🇺
Changed the default DHCP host name from COM MID1 to i-PRO-<MAC address of camera>. 🇺
Supports replacing %25 with % in the destination address of HTTP alarm notification. 🇺
Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode". 🇺
Changed the text color on the log list for the visibility improvement. 🇺
Resolved Issues
HTTPS connection is not available until the [Connection] setting is once switched from "HTTP" to "HTTPS", on the HTTPS setting page in the [Advanced] window. 🇨
It it not possible to reinstall an extension software application after uninstalling it. 🇨
Occurrence condition: The power of camera is turned off while uninstalling the extension software application.The camera cannot connect to a recorder and VMS on rare occasion. 🇨
Occurrence condition: TLS1.3 is selected for [HTTPS-Connection].H.265/H.264 live image may not appear. 🇨
Occurrence condition: When satisfying all of the following conditions:
- Version 2.10 or later
- Network Address Port Translation (NAPT) is configured on the routerAnchor V2.23 V2.23
...
Release date: December 9, 2022
Resolved Issues
The live image may not appear, as the maximum number of users concurrently accessible to the camera decreases. 🇧
Occurrence condition: When satisfying all of the following conditions:
- Version 2.10 or 2.21
- [Internet mode] is set to Off by CGI command
- H.264/H.265 transmission