Released versions:

...

• [PTZ part] Corrected an issue where a noise appeared on the image after zooming. 🇺 🇨
  Occurrence conditions: [Stabilizer] is on under low light condition.

• [PTZ part] Corrected an issue where the setting change of AI application might not be possible on rare occasion. 🇺🇨

• [PTZ part] Corrected an issue where the web browser closed during the PTZ operation using control pad on the detail setting window. 🇺 🇨
  Occurrence condition:
  - HTTPS communication
  - Specific version of Google Chrome and Microsoft Edge

• Corrected an issue where audio output did not work on the live window. 🇺 🇨
  Occurrence condition:
  - Network Address Port Translation (NAPT) is configured on the router

• [PTZ part] Corrected an issue where click-to-center PT control might not work for a while after opening a live image on a web browser. 🇺🇨

• Corrected the SNMP MIB response. 🇺🇨
  

  Anchor
  V2.63 V2.63

Version 2.63

...

Release date: Sept 28, 2023 ->Updated on Oct 10: Added items written in red - Download the latest firmware

...

• Improved the performance while updating or installing extension software to avoid failure in a slow network. 🇺

• (MULTI part) Improved the frame rate when [GOP control] is set to “Advanced(Fixed GOP 60s w/1s key-frame)”. 🇺 View details

• Enabled all preset positions in Preset sequence 1, 2 and 3 by default. 🇺

• Changed the [Auto track data in video stream] default setting from "Off" to "On (with live display)" on the [Auto track] tab in [PTZ]. 🇺

• (MULTI part) Enabled [Guest User] by default on the 「User auth.] tab in [User mng.] 🇺

• Improved the image quality. 🇺

• Improved the Auto Focus performance in low illuminance environments. 🇺

• Improved the PTZ performance. 🇺

• Improved the response to the following CGI commands. 🇺

  • /cgi-bin/getdata

  • /cgi-bin/get_io2

  • /cgi-bin/get_capability

• Improved the ONVIF connection. 🇺

• Improved the auto tracking behavior. 🇺

• Improved the communication between multi-directional part and PTZ part at AI-VMD alarm occurrence. 🇺

• Improved the data management when updating extension software applications. 🇺

• Supports CGI commands to turn on and off the manual and alarm linkages between PTZ part and Multi part. 🇺 View details

• Improved the SRTP communication. 🇺

• Changed the [SNMP] default setting to Off on the [Network] page. 🇺

• Improved the performance while downloading a video data from an SD memory card in an unstable network. 🇺

• Improved the reflection speed of information display on the live image page. 🇺

• Supports new CGI commands. 🇺

• (PTZ part) Improved the FTP/SFTP settings as follows 🇺View details
  - Added 2fps and 3fps to the [Transmission interval] options of [Pre alarm] and [Post alarm]
  - Increased the number of SFTP server setting from 1 to2
  - Added "1920x1080" to the [Image capture size] options of [Pre alarm]

• (PTZ part) Added 0.5s, 1s, 2s, 3s, and 4s to the [Alarm deactivation time] options. 🇺View details

• Supports day and night scene switching on the [Schedule] setting. 🇺View details
  "<Auto-Schedule>Daytime: Image Quality 1/ Night: Image Quality 2" has been added to the [Schedule mode] options.
  *[Scene settings linked to sunrise and sunset times] need to be configured to use this function.

• Supports ext4 for SD memory card format. 🇺View details
  [SD Memory Card File System Format] setting has been added to the [SD memory card] page.

• Added the On/Off setting to the [SNMP agent setting] in [Network]->[Advanced]->[SNMP]. 🇺
  *Default=On

• Supports a CGI command to start SD recording when an image transmission stops. 🇺View details

• Supports editing the camera title on the live window. An edit icon appears next to the camera title. 🇺
  Note: Available for administrator only.

• Supports a command to send HTTP port number to a 3rd party application. 🇺

• Changed the default DHCP host name from COM MID1 to i-PRO-<MAC address of camera>. 🇺

• Supports replacing %25 with % in the destination address of HTTP alarm notification. 🇺

• Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode". 🇺

• Improved the connectivity with i-PRO Configuration Tool (iCT). 🇺

• Improved [Audio detection] setting so that [AI analytics target] options (Gunshot/ Yell/ Vehicle Horn/ Glass Break) are enabled by default, when [Audio detection] is set to "On". 🇺

• Improved the frame rate during the slow shutter operation under low illuminance condition. 🇺

• Improved the detection accuracy of people detection for extension software. 🇺

• Supports the extension software AI Scene Change Detection free of charge. 🇺

• Changed the text color on the log list for the visibility improvement. 🇺

• Improved the ONVIF connection. 🇺

• (PTZ part) Improved the auto tracking performance. 🇺

Resolved Issues

• Corrected an issue where the camera showed a blank pop-up of installation status error. 🇨

• Corrected an issue where the image could not be zoomed out on video management system. 🇨
  Occurrence condition: After maximum zoom by mouse drag. 🇨

• Corrected an issue where the camera rebooted. 🇧
  Occurrence conditions:
  - [Image capture mode] is "4:3 mode(30fps mode)" or "4:3 mode(25fps mode)"
  - Digital zoom to the maximum level

• Corrected an issue where an mp4 video recorded on an SD memory card could not be played back on the camera. 🇨
  Occurrence condition: Record an mp4 video with [GOP control] set to "Advanced(Fixed GOP 60s w/1s key-frame)"

• Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion. 🇨
  Occurrence conditions: Start sequence display on the recorder while performing SD memory card recording on the camera.

• Corrected an issue where the [Save trigger] setting of SD memory recording might unexpectedly changed after firmware update. 🇨

• (MULTI part) Corrected an issue where VIQS area setting returned 403 Forbidden error and could not be set. 🇨
  Occurrence condition:
  - [Image capture mode] is set to "4:3"
  - Specify an area to the bottom limit of the image

• (PTZ part) Corrected an issue where the camera showed low image quality. 🇨
  Occurrence conditions:
  - [Stabilizer] is On in the [Basic] setting
  - [Frame rate] is set to 8.3fps, 4.2fps or 3.1fps

• (MULTI part) Corrected an issue where [Super Dynamic(SD)]-[Level] setting did not return to the default value when the Reset button is clicked. 🇨

• Corrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting. 🇨

• Corrected an issue where MQTT notification worked only when [AI analytics target] is set to "Other" for audio detection. 🇨

• (PTZ part) Corrected an issue where [Auto track] and [Auto track alarm setting] were disabled when [Maximum shutter] is set to "Max.2/30s" or longer value. 🇨

• (MULTI part) Removed an unnecessary alarm icon shown on setting windows. 🇨

• (PTZ part) Corrected an issue where the window to set preset positions did not appear when setting VIQS. 🇨

• Corrected an issue where the mic input volume from the camera became higher than the selected value. 🇨
  Occurrence condition: Change the [Mic input volume] on the live window.

• (MULTI part) Corrected an issue where the camera displayed unavailable options for [Maximum shutter] of Camera 2, 3, and 4 on the live window. 🇨
  Occurrence condition: [Super Dynamic(SD)] is set to "On"

• (MULTI part) Corrected an issue where the camera did not change the [Maximum shutter] setting according to the on/off setting of [Super Dynamic(SD)] for Camera1, on the live window. 🇨

• Corrected an issue where it was not possible to reinstall an extension software application after uninstalling it. 🇨
  Occurrence condition: The power of camera is turned off while uninstalling the extension software application.

• Corrected an issue where the camera could not connect to a recorder and VMS on rare occasion. 🇨
  Occurrence condition: TLS1.3 is selected for [HTTPS-Connection].

• Corrected an issue where H.265/H.264 live image might not appear. 🇨
  Occurrence condition: Network Address Port Translation (NAPT) is configured on the router

• (PTZ part) Corrected an issue where the camera might reboot. 🇨
  Occurrence conditions:

  • The extension software AI-VMD and AI Privacy Guard are installed and enabled on the camera.

  • The camera is connected to a recorder and “SD backup rec.” is enabled on the recorder’s setting.

• Corrected an issue where the camera might be slow to start up. 🇨
  Occurrence condition: Multicast auto start is enabled by CGI command.
  

  Anchor
  V2.29 V2.29

Version 2.29

...