Versions Compared

Version Old Version 22 New Version 23
Changes made by

Akari Tomitaka (冨髙 安果莉)

Akari Tomitaka (冨髙 安果莉)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Released versions:

Click here for the release note from V1.00 to V2.11

...

🇦 : Recommended to apply
🇧 : When issue happened
🇨 : Maintenance timing
🇺 : Function / performance improvement

Anchor
V2.70
V2.70

Version 2.70

Release date: October 22, 2024

New Features / Improvements

  • Changed the icons and font for design improvement. 🇺

  • Support camera direct connect to Remote Monitoring without recorders. 🇺

  • Improved ONVIF connection. 🇺

  • Support NTPv3. 🇺

  • Improved the audio transmission speed from PC to the camera. 🇺

Resolved Issues

Fixed the following issues including other minor issues:

  • Corrected an issue where "Close(Continue)" and "Open(Continue)" did not appear on the [Alarm] tab of live window. 🇺

  • Corrected an issue where audio output did not work on the live window. 🇺
    Occurrence condition:
    - Network Address Port Translation (NAPT) is configured on the router

  • Corrected an issue where click-to-center PT control might not work for a while after opening a live image on a web browser. 🇺

  • Corrected the SNMP MIB response. 🇺

    Anchor
    V2.60
    V2.60

Version 2.60

Release date: May 31 2024 - Download the latest firmware

New Features / Improvements

  • Changed the font and color on the browser as below:

    • The font of on-screen display (OSD) to Iwata UD 🇺

    • The font of the live and setting windows to NotoSans 🇺

    • The color of i-PPO logo on the live window to black 🇺

  • Support cgi-bin/setdata for HTTP alarm setting. 🇺

  • Removed the need for KMS registration of AI Face Detection. 🇺 View detail
    From this version, issuing and registering the Registration Key are no longer required for AI Face Detection.

  • Added improvements for 3rd party application development. 🇺
    See details at Development Partner Portal.

  • Improved [Control log] to record "AI processor occupancy (Ext. software)" logs properly. 🇺

  • Improved ONVIF communication. 🇺

Resolved Issues

Fixed the following issues including other minor issues:

...

Release date: Feb. 29 2024
[Update on Apr. 24] To use Vaxtor VaxALPR with this firmware version, update VaxALPR to V1.3.21 or later.

New Features / Improvements

  • Added improvements to enhance security. 🇺
    e.g.,
    - Supports signed firmware
    - [Subject Alternative Name] field has been added to [CA Certificate - Generate Certificate Signing Request] in HTTPS setting. View detail
    - [Security] tab has been added to the [User mng.] setting. View detail

  • Added improvements to the live and setting windows on the web browser. 🇺
    e.g.,
    - A button to show and hide frame rate and bit rate has been added on the live image. View detail
    - HTTP alarm notification setting has been improved. View detail

  • Improved the response to CGI commands. 🇺
    Refer to Command Document (H.265 supported models) at Device integration - IP Camera / i-PRO page.

  • Improved the image quality. 🇺
    For verification results and restrictions on each browser, refer to "Verification of camera performance with Google Chrome, Firefox, and Microsoft Edge (C0132)" on Technical Information.

  • Improved the connectivity to Video Management Software (VMS). 🇺

  • Improved the ONVIF connection. 🇺

Resolved Issues

  • Fixed minor issues. 🇨

    Anchor
    V2.49
    V2.49

...

Release date: Sept 28, 2023
SDK version: V1.60

New Features / Improvements

  • Improved the performance while updating or installing extension software to avoid failure in a slow network. 🇺

  • Improved the response to the following CGI commands: 🇺

    • /cgi-bin/getdata

    • /cgi-bin/get_capability

    • /cgi-bin/set_imgmode?img_mode

  • Improved the ONVIF connection. 🇺

  • Improved the data management when updating extension software applications. 🇺

  • Improved the SRTP communication. 🇺

  • Changed the [SNMP] default setting to Off on the [Network] page. 🇺

  • Improved the log management process of SD memory card recording. 🇺

  • Improved the performance while downloading a video data from an SD memory card in an unstable network. 🇺

Resolved Issues

  • Corrected an issue where multi-screen live view might not show images from other cameras. 🇨

  • Corrected an issue where an mp4 video recorded on an SD memory card could not be played back on the camera. 🇨
    Occurrence condition: Record an mp4 video with [GOP control] set to "Advanced(Fixed GOP 60s w/1s key-frame)"

  • Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion. 🇨
    Occurrence condition: Start sequence display on the recorder while performing SD memory card recording on the camera.

  • Corrected an issue where the [Save trigger] setting of SD memory recording might unexpectedly changed after firmware update. 🇨

  • Corrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting. 🇨

  • Corrected an issue where MQTT notification worked only when [AI analytics target] is set to "Other" for audio detection. 🇨

  • Corrected an issue where pan and tilt operation did not work on Ch2, Ch3 and Ch4 of Stream (2) on the browser. 🇨
    Occurrence condition: When "Quad streams" is selected for [Image capture mode].

  • Corrected an issue where the window to set preset positions did not appear when setting VIQS. 🇨

    Anchor
    V2.36
    V2.36

...

Release date: May 31 2023
SDK version: V1.60

Resolved Issues

  • Corrected an issue where a short-term communication error could occur on a connected recorder. 🇨
    Occurrence condition:
    - FIrmware version from 2.10 to 2.33
    - [SD backup rec.] is enabled on the recorder connected to the camera.

    Anchor
    V2.33
    V2.33

...

Release date: March 31, 2023
SDK version: V1.60

New Features / Improvements

  • Supports ext4 for SD memory card format. 🇺 View details
    [SD Memory Card File System Format] setting has been added to the [SD memory card] page.

  • Improved the ONVIF connection. 🇺

Resolved Issues

  • Corrected an issue where [AUTO VIQS] did not work even when it was set to "On". 🇨

  • Corrected an issue where Video Motion Detection (VMD) alarm could be issued only one time. 🇨
    Occurrence conditions: "Quad streams" is selected for [Image capture mode].

  • Corrected an issue where the camera might reboot. 🇨
    Occurrence conditions:
    - The extension software AI-VMD and AI Privacy Guard are installed and enabled on the camera.
    - The camera is connected to a recorder and “SD backup rec.” is enabled on the recorder’s setting.

  • Corrected an issue where the camera might be slow to start up. 🇨
    Occurrence condition: Multicast auto start is enabled by CGI command.

  • Corrected an issue where the camera unexpectedly changed recording stream from JPEG(2) to Stream(1) when [Image capture mode] was set to "Fisheye". 🇨
    Occurrence condition:
    - From version 2.10 to 2.30
    *Applies only to: WV-S4176, WV-S4576L and WV-S4576LM

  • Corrected an issue where Video Motion Detection (VMD) alarm might not work. 🇨
    Occurrence conditions:
    - From version 2.10 to 2.30
    - [Light detection control] is set to On.
    - [Image capture mode] is set to "Quad PTZ", "Single PTZ" or "Quad streams".

    Anchor
    V2.30
    V2.30

...

Release date: February 27, 2023
SDK version: V1.60

New Features / Improvements

  • Supports new CGI commands. 🇺

  • Supports day and night scene switching on the [Schedule] setting. 🇺 View details #1
    "<Auto-Schedule>Daytime: Image Quality 1/ Night: Image Quality 2" has been added to the [Schedule mode] options.
    *[Scene settings linked to sunrise and sunset times] need to be configured to use this function.

  • Added the On/Off setting to the [SNMP agent setting] in [Network]->[Advanced]->[SNMP]. 🇺
    *Default=On

  • Supports a CGI command to start SD recording when an image transmission stops. 🇺 View details #2

  • Added ”Corridor” and "Fisheye + Corridor" to the [Image capture mode] options. 🇺 View details #5

  • Supports editing the camera title on the live window. An edit icon appears next to the camera title. 🇺
    Note: Available for administrator only.

  • Supports aspect ratio other than 1:1 for the response to "ADAM_Campref_get()" from a 3rd party application. 🇺

  • Supports a command to send HTTP port number to a 3rd party application. 🇺

  • Changed the default DHCP host name from COM MID1 to i-PRO-<MAC address of camera>. 🇺

  • Improved the FTP/SFTP settings as follows 🇺 View details #3
    - Added 2fps and 3fps to the [Transmission interval] options of [Pre alarm] and [Post alarm]
    - Increased the number of SFTP server setting from 1 to2
    - Added "1920x1080" to the [Image capture size] options of [Pre alarm]

  • Added 0.5s, 1s, 2s, 3s, and 4s to the [Alarm deactivation time] options. 🇺 View details #4

  • Supports replacing %25 with % in the destination address of HTTP alarm notification. 🇺

  • Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode". 🇺

  • Improved the connectivity with i-PRO Configuration Tool (iCT). 🇺

  • Improved [Audio detection] setting so that [AI analytics target] options (Gunshot/ Yell/ Vehicle Horn/ Glass Break) are enabled by default, when [Audio detection] is set to "On". 🇺

  • Improved the frame rate during the slow shutter operation under low illuminance condition. 🇺

  • Improved the image quality as follows 🇺
    Image contrast / Auto focus performance during pan-tilt operation / Image brightness during stabilizer operation

  • Supports the extension software AI Scene Change Detection free of charge. 🇺

  • Changed the text color on the log list for the visibility improvement. 🇺

  • Improved the ONVIF connection. 🇺

Resolved Issues

  • Corrected an issue where the mic input volume from the camera became higher than the selected value. 🇨
    Occurrence condition: Change the [Mic input volume] on the live window.

  • Corrected an issue where the mouse wheel zooming did not work on the images of Stream(2), (3), and (4) on the live window. 🇨

  • Corrected an issue where the [Mic input volume] setting displayed "Line High/ Line Middle/ Line Low" as options on the live window, even for the camera without line input. 🇨

  • Corrected an issue where it was not possible to reinstall an extension software application after uninstalling it. 🇨
    Occurrence condition: The power of camera is turned off while uninstalling the extension software application.

  • Corrected an issue where the camera could not connect to a recorder and VMS on rare occasion. 🇨
    Occurrence condition: TLS1.3 is selected for [HTTPS-Connection].

  • Corrected an issue where H.265/H.264 live image might not appear. 🇨
    Occurrence condition:
    - Version 2.10 or later
    - Network Address Port Translation (NAPT) is configured on the router

    Anchor
    V2.23
    V2.23

...

Release date: December 9, 2022

Resolved Issues

  • The image becomes pinkish. 🇨
    Occurrence condition:
    When satisfying both of the following conditions:
    - [Day & Night(IR)] is set to "Auto":
    - The camera was restarted in the following steps:
    1. Turned off in black&white mode
    2. Turned on in a bright environment

  • SFTP transmission fails depending on the SFTP server to be connected. 🇨

  • The live image may not appear, as the maximum number of users concurrently accessible to the camera decreases. 🇧
    Occurrence condition:
    When satisfying all of the following conditions:
    - Version 2.10, 2.11 or 2.20
    - [Internet mode] is set to Off by CGI command
    - H.264/H.265 transmission

  • The camera may reboot. 🇨
    Occurrence condition:
    When satisfying both of the following conditions:
    - AI-VMD and AI Privacy Guard are enabled on the camera
    - Take a snap shot of the target stream for AI Privacy Guard "Blurring" or "Block"

  • Noise may appear on the camera title and date/time of On-Screen Display (OSD). 🇨
    Occurrence condition: When performing AI Privacy Guard "Blurring" or "Block" on the image

...

Release date: September 30, 2022
SDK version: V1.60

New Features / Improvements

  • Changed the company name in the GlobalSign digital certificate installed on the camera to "i-PRO Co., Ltd." 🇺

  • Supports the FTP function. 🇺 View details

  • Added the HTML initialization function. 🇺 (Added on Nov.11, 2022)
    [Load the default HTML files (setup menu).] and [Reset to the default and load the default HTML files.] have been added to the [Default reset] tab.

Resolved Issues

  • The occupancy detection area information is not included in the HTTP alarm notification from the camera. 🇨

  • The frame rate and bit rate may not recover once they drop due to the environmental cause. 🇨