Table of contents
| Table of Contents | ||||
|---|---|---|---|---|
|
Overview
This section explains how to install the container app using the iPRO Camera SDK. In this tutorial, the installation directory of the SDK is indicated as ${SDK_DIR}.
...
Container AdamApp
...
can
...
Also, if you are developing an application for SoC ambaCV2X, please build the development environment from here.
Installation Instructions
Please build your application separately.
How to install from a web browser
Access the following URL in your web browser.
http://(Camera IP address)
For example, if the camera's IP address is 192.168.0.10, it will be as follows.
http://192.168.0.10
Enter the user name and password for the camera.
Press the buttons in the order ①②③ in the image below.
...
Install the app on your camera from the screen below (for example, you can install it from the green frame in the image below). Select the .ext file you created and install it.
Open the app screen (red frame button in the image below).
...
If the application runs, you're successful.
How to install from Adam Operation UI
If you have not installed Adam Operation UI, please follow the instructions below to install it.
Enter the camera IP address in ① in the image below, press the Connect button, and then press the Install button in ②.
Select the .ext file you created and install it.
...
If the application is working, it is a success. Please check the operation from the following screenbe installed from the camera web browser, Adam Operation UI, or i-PRO setting tool, just like Adamapp. Please refer to the following.
https://iproiot.atlassian.net/wiki/spaces/TPFAQEN/pages/edit-v2/1537802814#How-to-install-from-a-web-browser
How to install from i-PRO Configuration Tool (iCT)
Please download the tool from the link below. Also, please refer to the following page for basic instructions on how to use the i-PRO Configuration tool.
i-PRO Configuration Tooldev-partner-en.i-pro.com/space/TPFAQEN/1039827280