Released versions:

...

Release date: Feb. 29 2024 - Download the latest firmware
[Update on Apr. 24] To use Vaxtor VaxALPR with this firmware version, update VaxALPR to V1.3.21 or later.

...

Release date: Feb. 29 2024 - Download the latest firmware

• Intermediate firmware version to upgrade from version 2.4x or earlier to version 2.50 or later.
  

  Anchor
  V2.40 V2.40

...

Release date: Sept 28, 2023 - Download the latest firmware
->Updated on Oct 31: Added an item written in red

New Features / Improvements

...

• Corrected an issue where the camera showed a blank pop-up of installation status error. 🇨

• Corrected an issue where the image could not be zoomed out on video management system. 🇨
  Occurrence condition: After maximum zoom by mouse drag. 🇨

• Corrected an issue where the camera rebooted. 🇧
  Occurrence conditions:
  - [Image capture mode] is "4:3 mode(30fps mode)" or "4:3 mode(25fps mode)"
  - Digital zoom to the maximum level

• Corrected an issue where an mp4 video recorded on an SD memory card could not be played back on the camera. 🇨
  Occurrence condition: Record an mp4 video with [GOP control] set to "Advanced(Fixed GOP 60s w/1s key-frame)"

• Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion. 🇨
  Occurrence condition: Start sequence display on the recorder while performing SD memory card recording on the camera.

• Corrected an issue where the [Save trigger] setting of SD memory recording might unexpectedly changed after firmware update. 🇨

• Corrected an issue where the camera showed low image quality. 🇨
  Occurrence conditions:
  - [Stabilizer] is On in the [Basic] setting
  - [Frame rate] is set to 8.3fps, 4.2fps or 3.1fps

• Corrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting. 🇨

• Corrected an issue where MQTT notification worked only when [AI analytics target] is set to "Other" for audio detection. 🇨

• Corrected an issue where [Auto track] and [Auto track alarm setting] were disabled when [Maximum shutter] is set to "Max.2/30s" or longer value. 🇨

• Corrected an issue where the window to set preset positions did not appear when setting VIQS. 🇨

• Corrected an issue where multi-screen live view might not show images from other cameras. 🇨
  

  Anchor
  V2.36 V2.36

Version 2.36

Release date: May 31 2023 - Download the latest firmware

Resolved Issues

• Corrected an issue where a short-term communication error could occur on a connected recorder. 🇨
  Occurrence condition:
  - FIrmware version from 2.22 to 2.33
  - [SD backup rec.] is enabled on the recorder connected to the camera.
  

  Anchor
  V2.33 V2.33

...