Released versions:

...

• Corrected an issue where the setting menu and schedule of pre-installed extension software might not appear with version 2.50. 🇨

• Corrected an issue where some 3rd party applications might not work with version 2.50. 🇨

• Corrected an issue where AI-VMD detection frames did not appear on Genetec Security Desk with version 2.50. 🇨Corrected an issue where Video Management Software (VMS) could not receive SD recording data from the camera. 🇨

• Corrected the response to the following CGI command. 🇨

  • cgi-bin/getdata

  • cgi-bin/get_io2?mode=monitor

• Added a correction to a message in French. 🇨
  

  Anchor
  V2.50 V2.50

...

Release date: Sept 28, 2023 ->Updated on Oct 10: Added items written in red - Download the latest firmware

...

• Improved the performance while updating or installing extension software to avoid failure in a slow network. 🇺

• Enabled [Guest User] by default on the [User auth.] tab in [User mng.] 🇺

• Improved the response to the following CGI commands. 🇺

  • /cgi-bin/getdata

  • /cgi-bin/get_capability

• Improved the ONVIF connection. 🇺

• Improved the data management when updating extension software applications. 🇺

• Improved the SRTP communication. 🇺

• Changed the [SNMP] default setting to Off on the [Network] page. 🇺

• Improved the performance while downloading a video data from an SD memory card in an unstable network. 🇺

• Supports new CGI commands. 🇺

• Supports day and night scene switching on the [Schedule] setting. 🇺View details
  "<Auto-Schedule>Daytime: Image Quality 1/ Night: Image Quality 2" has been added to the [Schedule mode] options.
  *[Scene settings linked to sunrise and sunset times] need to be configured to use this function.

• Supports ext4 for SD memory card format. 🇺View details
  [SD Memory Card File System Format] setting has been added to the [SD memory card] page.

• Added the On/Off setting to the [SNMP agent setting] in [Network]->[Advanced]->[SNMP]. 🇺
  *Default=On

• Supports a CGI command to start SD recording when an image transmission stops. 🇺View details

• Added "1280x720" to the [Image capture size] of Stream(1) and (2). 🇺View details

• Supports editing the camera title on the live window. An edit icon appears next to the camera title. 🇺
  Note: Available for administrator only.

• Supports a command to send HTTP port number to a 3rd party application. 🇺

• Changed the default DHCP host name from COM MID1 to i-PRO-<MAC address of camera>. 🇺

• Supports replacing %25 with % in the destination address of HTTP alarm notification. 🇺

• Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode". 🇺

• Improved the connectivity with i-PRO Configuration Tool (iCT). 🇺

• Improved [Audio detection] setting so that [AI analytics target] options (Gunshot/ Yell/ Vehicle Horn/ Glass Break) are enabled by default, when [Audio detection] is set to "On". 🇺

• Improved the frame rate during the slow shutter operation under low illuminance condition. 🇺

• Improved the detection accuracy of people detection for extension software. 🇺

• Supports the extension software AI Scene Change Detection free of charge. 🇺

• Changed the text color on the log list for the visibility improvement. 🇺

• Improved the ONVIF connection. 🇺

Resolved Issues

• Corrected an issue where an mp4 video recorded on an SD memory card could not be played back on the camera. 🇨
  Occurrence condition: Record an mp4 video with [GOP control] set to "Advanced(Fixed GOP 60s w/1s key-frame)"

• Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion. 🇨
  Occurrence condition: Start sequence display on the recorder while performing SD memory card recording on the camera.

• Corrected an issue where the angle of view shifted after restarting the camera. 🇨
  Occurrence condition: Use digital zoom in to set the angle of view.

• Corrected an issue where the [Save trigger] setting of SD memory recording might unexpectedly changed after firmware update. 🇨

• Corrected an issue where an unnecessary pop-up regarding the bit rate of recording stream appeared. 🇨

• Corrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting. 🇨

• Corrected an issue where MQTT notification worked only when [AI analytics target] is set to "Other" for audio detection. 🇨

• Removed an unnecessary alarm icon shown on setting windows. 🇨

• Corrected an issue where the mic input volume from the camera became higher than the selected value. 🇨
  Occurrence condition: Change the [Mic input volume] on the live window.

• Corrected an issue where the camera displayed unavailable options for [Maximum shutter] of Camera 2, 3, and 4 on the live window. 🇨
  Occurrence condition: [Super Dynamic(SD)] is set to "On"

• Corrected an issue where the camera did not change the [Maximum shutter] setting according to the on/off setting of [Super Dynamic(SD)] for Camera1, on the live window. 🇨

• Corrected an issue where it was not possible to reinstall an extension software application after uninstalling it. 🇨
  Occurrence condition: The power of camera is turned off while uninstalling the extension software application.

• Corrected an issue where the camera could not connect to a recorder and VMS on rare occasion. 🇨
  Occurrence condition: TLS1.3 is selected for [HTTPS-Connection].

• Corrected an issue where H.265/H.264 live image might not appear. 🇨
  Occurrence condition: Network Address Port Translation (NAPT) is configured on the router

• Corrected an issue where the camera might be slow to start up. 🇨
  Occurrence condition: Multicast auto start is enabled by CGI command.
  

  Anchor
  V2.28 V2.28

Version 2.28

...