Released versions:
...
🇦 : Recommended to apply |
| Anchor | ||||
|---|---|---|---|---|
|
Version 2.40
Release date: Sept 28, 2023 - Download the latest firmware
New Features / Improvements
Improved the performance while updating or installing extension software to avoid failure in a slow network. 🇺
Enabled all preset positions in Preset sequence 1, 2 and 3 by default. 🇺
Changed the [Auto track data in video stream] default setting from "Off" to "On (with live display)" on the [Auto track] tab in [PTZ]. 🇺
Improved the image quality. 🇺
Improved the Auto Focus performance in low illuminance environments. 🇺
Improved the PTZ performance. 🇺
Improved the response to the following CGI commands. 🇺
/cgi-bin/getdata
/cgi-bin/get_capability
/cgi-bin/set_sdcard?sdcard=1
Improved the ONVIF connection. 🇺
Improved the auto tracking behavior. 🇺
Improved the data management when updating extension software applications. 🇺
Improved the SRTP communication. 🇺
Changed the [SNMP] default setting to Off on the [Network] page. 🇺
Improved the performance while downloading a video data from an SD memory card in an unstable network. 🇺
Resolved Issues
Corrected an issue where the camera showed a blank pop-up of installation status error. 🇨
Corrected an issue where the image could not be zoomed out on video management system. 🇨
Occurrence condition: After maximum zoom by mouse drag. 🇨Corrected an issue where the camera rebooted. 🇧
Occurrence conditions:
- [Image capture mode] is "4:3 mode(30fps mode)" or "4:3 mode(25fps mode)"
- Digital zoom to the maximum levelCorrected an issue where an mp4 video recorded on an SD memory card could not be played back on the camera. 🇨
Occurrence condition: Record an mp4 video with [GOP control] set to "Advanced(Fixed GOP 60s w/1s key-frame)"Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion. 🇨
Occurrence condition: Start sequence display on the recorder while performing SD memory card recording on the camera.Corrected an issue where the [Save trigger] setting of SD memory recording might unexpectedly changed after firmware update. 🇨
Corrected an issue where the camera showed low image quality. 🇨
Occurrence conditions:
- [Stabilizer] is On in the [Basic] setting
- [Frame rate] is set to 8.3fps, 4.2fps or 3.1fpsCorrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting. 🇨
Corrected an issue where MQTT notification worked only when [AI analytics target] is set to "Other" for audio detection. 🇨
Corrected an issue where [Auto track] and [Auto track alarm setting] were disabled when [Maximum shutter] is set to "Max.2/30s" or longer value. 🇨
Corrected an issue where the window to set preset positions did not appear when setting VIQS. 🇨
Anchor V2.36 V2.36
Version 2.36
Release date: May 31 2023 - Download the latest firmware
Resolved Issues
Corrected an issue where a short-term communication error could occur on a connected recorder. 🇨
Occurrence condition:
- FIrmware version from 2.10 to 2.33
- [SD backup rec.] is enabled on the recorder connected to the camera.Anchor V2.33 V2.33
...
Release date: March 31, 2023
New Features / Improvements
Supports ext4 for SD memory card format. 🇺 View details
[SD Memory Card File System Format] setting has been added to the [SD memory card] page.Improved the ONVIF connection. 🇺
Resolved Issues
Corrected an issue where the camera might reboot. 🇨
Occurrence conditions:
- The extension software AI-VMD and AI Privacy Guard are installed and enabled on the camera.
- The camera is connected to a recorder and “SD backup rec.” is enabled on the recorder’s setting.Corrected an issue where the camera might be slow to start up. 🇨
Occurrence condition: Multicast auto start is enabled by CGI command.Anchor V2.30 V2.30
...
Release date: February 28, 2023
New Features / Improvements
Supports new CGI commands. 🇺
Supports day and night scene switching on the [Schedule] setting. 🇺 View details #1
"<Auto-Schedule>Daytime: Image Quality 1/ Night: Image Quality 2" has been added to the [Schedule mode] options.
*[Scene settings linked to sunrise and sunset times] need to be configured to use this function.Added the On/Off setting to the [SNMP agent setting] in [Network]->[Advanced]->[SNMP]. 🇺
*Default=OnSupports a CGI command to start SD recording when an image transmission stops. 🇺 View details #2
Supports editing the camera title on the live window. An edit icon appears next to the camera title. 🇺
Note: Available for administrator only.Supports a command to send HTTP port number to a 3rd party application. 🇺
Changed the default DHCP host name from COM MID1 to i-PRO-<MAC address of camera>. 🇺
Improved the FTP/SFTP settings as follows 🇺 View details #3
- Added 2fps and 3fps to the [Transmission interval] options of [Pre alarm] and [Post alarm]
- Increased the number of SFTP server setting from 1 to2
- Added "1920x1080" to the [Image capture size] options of [Pre alarm]Added 0.5s, 1s, 2s, 3s, and 4s to the [Alarm deactivation time] options. 🇺 View details #4
Supports replacing %25 with % in the destination address of HTTP alarm notification. 🇺
Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode". 🇺
Improved the connectivity with i-PRO Configuration Tool (iCT). 🇺
Improved [Audio detection] setting so that [AI analytics target] options (Gunshot/ Yell/ Vehicle Horn/ Glass Break) are enabled by default, when [Audio detection] is set to "On". 🇺
Changed the text color on the log list for the visibility improvement. 🇺
Improved the frame rate during the slow shutter operation under low illuminance condition. 🇺
Improved the image quality as follows 🇺
Image contrast / Auto focus performance during pan-tilt operation / Image brightness during stabilizer operationImproved the ONVIF connection. 🇺
Improved the detection accuracy of people detection for extension software. 🇺
Supports the extension software AI Scene Change Detection free of charge. 🇺
Improved the auto tracking performance. 🇺
Resolved Issues
Corrected an issue where the mic input volume from the camera became higher than the selected value. 🇨
Occurrence condition: Change the [Mic input volume] on the live window.Corrected an issue where it was not possible to reinstall an extension software application after uninstalling it. 🇨
Occurrence condition: The power of camera is turned off while uninstalling the extension software application.Corrected an issue where the camera could not connect to a recorder and VMS on rare occasion. 🇨
Occurrence condition: TLS1.3 is selected for [HTTPS-Connection].Corrected an issue where H.265/H.264 live image might not appear. 🇨
Occurrence condition: Network Address Port Translation (NAPT) is configured on the routerCorrected an issue where the image could appear distorted on rare occasion. 🇨
Anchor V2.23 V2.23
...
Release date: December 16, 2022
New Features / Improvements
Improved the focus performance after the lens moves to the preset position, in a scene with point light sources. 🇺
Resolved Issues
SFTP transmission fails depending on the SFTP server to be connected. 🇨
The live image may not appear, as the maximum number of users concurrently accessible to the camera decreases. 🇧
Occurrence condition:
When satisfying all of the following conditions:
- Version 2.10 or 2.20
- [Internet mode] is set to Off by CGI command
- H.264/H.265 transmission
...
First mass production for WV-S65302-Z2-1
New Features / Improvements
Changed the company name in the GlobalSign digital certificate installed on the camera to "i-PRO Co., Ltd." 🇺
Supports the FTP function. 🇺 View details
Supports the extension software for 3rd party application. 🇺
Added the HTML initialization function. 🇺 (Added on Nov.11, 2022)
[Load the default HTML files (setup menu).] and [Reset to the default and load the default HTML files.] have been added to the [Default reset] tab.
Resolved Issues
The occupancy detection area information is not included in the HTTP alarm notification from the camera. 🇨
The frame rate and bit rate may not recover once they drop due to the environmental cause. 🇨
...
Release date: September 15, 2022
New Features / Improvements
Updated for the production management. 🇺
Note : Only the version number has changedAnchor V1.01 V1.01
...